Re: [AFMUG] Rocket to ePMP migration

I should clarify. The AC latency is solid at 1-3ms. It only hit 6ms under heavy load. We have another link in place, 30Mhz channel, very noisy (CINR19), dish too small on one side -67, I pull 90Mbps all day through this link and it has been up for months now without a single issue. This one fee

Re: [AFMUG] Rocket to ePMP migration

Rocket M5 craps out around 60Mbps. You can increase the channel size to 30 or 40 and maybe occasionally see 80Mbps on a Rocket M5. On the Rocket we would see latency go through the roof under full load. It would hit near 300-400ms at times. On the AC PTP we immediately saw 140Mbps on a fairly d

Re: [AFMUG] WTB- Nanobridge pieces

Thanks Matt! When I am in the shop I will count the dishes and see. -Ty On May 1, 2015 7:44 PM, "Matt Hardy" wrote: > Hey Ty, > How many do you need? We probably have a handful around the office if you > need a few... > > -Matt > > On Fri, May 1, 2015 at 5:33 PM, Ty Featherling > wrote: > >> We

[AFMUG] Fwd: Mimosa update - "Why you owe it to yourself" to get real facts

- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com - Forwarded Message - From: "Jaime Fink" To: memb...@wispa.org Sent: Friday, May 1, 2015 12:18:22 PM Subject: [WISPA Members] Mimosa update - "Wh

Re: [AFMUG] Another interesting Mimosa analysis..

Mimosa debunked that on the WISPA list. I'll forward it over. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com - Original Message - From: "Peter Kranz" To: af@afmug.com Sent: Friday, May 1, 2015

[AFMUG] Another interesting Mimosa analysis..

TL;DR version the Mimosa radios create some relatively power spurious emissions right in the 5.8 band if you choose the wrong channels. https://community.ubnt.com/t5/airFiber-Stories/AF5X-Why-you-owe-it-to-yourse lf-to-use-these-radios-for-backhaul/cns-p/1239600 Peter Kranz www.UnwiredLtd

Re: [AFMUG] Rocket to ePMP migration

Very happy! On 5/1/2015 5:13 AM, Matt Hardy wrote: Hi, There were some issues with AC PTP fixed with the latest beta (released this week), but to my knowledge there are no known issues with PtMP. Everyone that is using AC PtMP seems to be happy... -Matt On Thu, Apr 30, 2015 at 8:17 PM, Rhys

Re: [AFMUG] Fleet Management

We use linxup.com -Original Message- From: Af [mailto:af-boun...@afmug.com ] On Behalf Of Paul Stewart Sent: Thursday, April 30, 2015 12:58 PM To: af@afmug.com Subject: Re: [AFMUG] Fleet Management Not sure i

Re: [AFMUG] WTB- Nanobridge pieces

Hey Ty, How many do you need? We probably have a handful around the office if you need a few... -Matt On Fri, May 1, 2015 at 5:33 PM, Ty Featherling wrote: > We have quite a few Nanobridge dish kits in 22 and 25 versions but somehow > I am woefully short on the mounting bracket specifically for

Re: [AFMUG] detachable pole steps

Screw so you can back them out. -Original Message- From: Adam Moffett Sent: Friday, May 1, 2015 12:53 PM To: af@afmug.com Subject: Re: [AFMUG] detachable pole steps Sorry, I can't get over this. Why don't they use a ring shank instead of a screw? Oh wow...you hammer the lags in?

Re: [AFMUG] detachable pole steps

Many poles come pre-drilled. -Original Message- From: Adam Moffett Sent: Friday, May 1, 2015 12:42 PM To: af@afmug.com Subject: Re: [AFMUG] detachable pole steps Oh wow...you hammer the lags in? So do you drill the pilot hole to the inner diameter of the threads? After you hammer

[AFMUG] WTB- Nanobridge pieces

We have quite a few Nanobridge dish kits in 22 and 25 versions but somehow I am woefully short on the mounting bracket specifically for the larger dish. We have the dish, mind you, but not the backplate/bracket. I know some of you have plenty of these and if you want to offload some let me know. If

[AFMUG] Items for Sale

Motorola/Cambium Used 2.4 6dB Stingers 21 2.4 SM's 2400SM 19 2450APP10 Connectorized 2 2.4 Test Adapter 1 Ubiquiti Bullet M2

Re: [AFMUG] detachable pole steps

Apparently "fetter drive thread" lags can be hammered in or wrenched. http://www.macleanpower.com/file.asp?F=190168CCE6E9447B9E201EBE94A1C66F%2Epdf&N=PH%2D116%2Epdf&C=items/pdfs http://www.macleanpower.com/file.asp?F=F9641454B97748218A315FDBCF0A7F5C.pdf&N=PH-121.pdf&C=items/pdfs http://www.maclea

Re: [AFMUG] detachable pole steps

Sorry, I can't get over this. Why don't they use a ring shank instead of a screw? Oh wow...you hammer the lags in? So do you drill the pilot hole to the inner diameter of the threads? After you hammer a lag screw into the wood, isn't the hole all torn up? How does it stay at that point? You

Re: [AFMUG] detachable pole steps

Oh wow...you hammer the lags in? So do you drill the pilot hole to the inner diameter of the threads? After you hammer a lag screw into the wood, isn't the hole all torn up? How does it stay at that point? You drive the lag with a small sledge hammer. You hammer it all the way in. The detac

Re: [AFMUG] This is going to make a great UPS

On 5/1/15 10:38, Bill Prince wrote: I would want to run it DC, but it ain't bad. We're paying in the neighborhood of $1500 for about 5KWh with SLA batteries, so this would be a serious consideration. Actually it is DC, says "inverter not included". ~Seth

Re: [AFMUG] This is going to make a great UPS

I would want to run it DC, but it ain't bad. We're paying in the neighborhood of $1500 for about 5KWh with SLA batteries, so this would be a serious consideration. I'd like to know what the maximum draw-down is, and how many charge/discharge cycles, etc. etc. bp On 5/1/2015 10:20 AM, Peter

[AFMUG] This is going to make a great UPS

I want to see more specs, but a 10kWh AC UPS for $3500.. that's a decent price. http://www.teslamotors.com/powerwall Peter Kranz www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207- pkr...@unwiredltd.com

[AFMUG] Intermapper wireless probe errors?

Has anyone using intermapper fixed some of the ubiquiti and canopy probe errors from recent platforms? Or seeing the same small errors we're seeing? Thanks Jon Langeler Michwave Tech. Sent from my iPhone

Re: [AFMUG] Rocket to ePMP migration

Can you share some numbers compared to Rocket M5? Sent from my iPhone > On May 1, 2015, at 9:38 AM, Jeremy wrote: > > I have been running beta2 on PTP UBNT AC for months now without issue, and am > extremely happy with the product (except the whole DFS issue...surprise!). > If beta2 has issu

Re: [AFMUG] detachable pole steps

You drive the lag with a small sledge hammer. You hammer it all the way in. The detachable step slides over the head of the lag bolt. It is a special head to match the step. Normally you only put these on for the first few steps. They are an anti climb feature. Once up a few steps then yo

Re: [AFMUG] detachable pole steps

The other reason for moving to bucket type trucks was guys damaging their shoulders from putting up ladders all day long too ... -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ken Hohhof Sent: Friday, May 1, 2015 12:26 PM To: af@afmug.com Subject: Re: [AFMUG] deta

Re: [AFMUG] detachable pole steps

The utilities really seem to have gone away from climbing pegs on wood poles. If ladder doesn't reach, they use a bucket truck. Maybe safety reasons? Also to prevent unauthorized climbing? I can't think the last time I saw a power or phone tech climbing a pole. Those pegs don't seem well s

Re: [AFMUG] Looks like a great deal on a backup gen

I saw something similar at Costco the other day, a little bigger: http://www.costco.com/Champion-7000W-Running--9000W-Peak-DUAL-FUEL-Generator-wElectric-Start.product.100112008.html On 4/27/2015 5:52 PM, SmarterBroadband wrote: http://www.ebay.com/itm/DuroMax-XP4850EH-Hybrid-Portable-Dual-Fu

[AFMUG] detachable pole steps

I'm probably being dense. How do you drive that lag bolt? It seems to have a plain round head. http://www.hubbellpowersystems.com/pole-line/misc/step-detachable/ I found some instructions that say " Installed by placing plate over lag until plate cuts into pole". Does that mean you turn the

Re: [AFMUG] Rocket to ePMP migration

I have been running beta2 on PTP UBNT AC for months now without issue, and am extremely happy with the product (except the whole DFS issue...surprise!). If beta2 has issues I haven't seen them. Is it worth upgrading to beta5? I'm of the mindset 'if it ain't broke, don't fix it'. I am especially

Re: [AFMUG] Uh-oh, this can't be good.

That's what I said! -Ty On Thu, Apr 30, 2015 at 6:20 PM, SmarterBroadband < li...@smarterbroadband.com> wrote: > Why not AF24…. > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Ty Featherling > *Sent:* Wednesday, April 29, 2015 10:23 AM > *To:* af@afmug.com > *Subject:* [AFMUG] Uh

Re: [AFMUG] Fwd: New FCC Application for Cambium Networks inc.!

Other things I noticed: -codename Ironman / Ironlad -Manufacturer Gemtek (ChangSHU) -name is "5GHz ePMP Integrated Radio and 5GHz ePMP Connectorized Radio" but the picture is only the integrated stick. -testing lab is in India

Re: [AFMUG] Fleet Management

We're also using the same as the other Joshs. -Joshua On Thu, Apr 30, 2015 at 7:26 PM, SmarterBroadband < li...@smarterbroadband.com> wrote: > We use Virtual Fleet Supervisor. > Works OK. > Adam > > -Original Message- > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Paul Stewart >

Re: [AFMUG] Rocket to ePMP migration

Hi, There were some issues with AC PTP fixed with the latest beta (released this week), but to my knowledge there are no known issues with PtMP. Everyone that is using AC PtMP seems to be happy... -Matt On Thu, Apr 30, 2015 at 8:17 PM, Rhys Cuff (Latrobe I.T) < r...@latrobeit.com.au> wrote: > Hi