Re: [AFMUG] Safety Policy / Traffic Policy?

Hey Ben, document didn't make it through to list. I like the pylon holder and see a few of that design now. Nice and simple, a coworker had suggested some upside down hoop thing for quite a bit more each but I think it was for large trucks. I think this thread has given me enough leads to make s

Re: [AFMUG] CPE with prism ac gear

"OSHA" On 12/2/2017 4:29 PM, Jaime Solorza wrote: Powerbeams AC with larger dish Jaime Solorza On Dec 2, 2017 3:23 PM, "Sam Lambie" > wrote: What are you guys using for cpes up to 5 miles on a 120 sector?

Re: [AFMUG] Residential router recommendation.

Personally use an Asus as my default router at home when I’m not playing with Cisco/Juniper/Fortigate “non-home” routers … I have the RT-AC87R and an impressed …. Never lets me down and handles whatever I throw at it … the wireless is pretty good too IMHO Netgear Nighthawk – bought one before t

Re: [AFMUG] Tower Question

This photo shows 10’ overall. So does one from Rohn. https://www.3starinc.com/images/super/ROHN_25G_800x600t.jpg From: Craig House Sent: Sunday, December 3, 2017 12:58 PM To: af@afmug.com Subject: Re: [AFMUG] Tower Question I’ll measure one when I get home in an hour. I’ve got 200 sections

Re: [AFMUG] Tower Question

If you could measure the distance between the lattice “steps” too it would be helpful. I am tracing drawings from things on the web. Rather have some dimensions. From: Craig House Sent: Sunday, December 3, 2017 12:58 PM To: af@afmug.com Subject: Re: [AFMUG] Tower Question I’ll measure one

Re: [AFMUG] Tower Question

I’ll measure one when I get home in an hour. I’ve got 200 sections in my front yard. I’m sure I’ll fine one to measure. Both 45 and 25g Sent from my iPhone > On Dec 3, 2017, at 13:42, wrote: > > Is it 4” exactly? > > From: Craig House > Sent: Sunday, December 3, 2017 12:40 PM > To: af@a

Re: [AFMUG] Tower Question

Is it 4” exactly? From: Craig House Sent: Sunday, December 3, 2017 12:40 PM To: af@afmug.com Subject: Re: [AFMUG] Tower Question That’s correct. Sent from my iPhone On Dec 3, 2017, at 13:26, wrote: I find drawings showing 25G and 45G tower sections being 10’ end to end. But that wou

Re: [AFMUG] Tower Question

That’s correct. Sent from my iPhone > On Dec 3, 2017, at 13:26, wrote: > > I find drawings showing 25G and 45G tower sections being 10’ end to end. But > that would cause the tower to lose a few inches due to the telescoping at > each junction between sections. So, I am guessing it is 10’

[AFMUG] Tower Question

I find drawings showing 25G and 45G tower sections being 10’ end to end. But that would cause the tower to lose a few inches due to the telescoping at each junction between sections. So, I am guessing it is 10’ plus whatever length telescopes when mating the sections. Line 4”??

Re: [AFMUG] POE Fusing

Well you are in luck for next time because the MSRP is only $395! -Original Message- From: Robert Sent: Sunday, December 3, 2017 11:37 AM To: af@afmug.com Subject: Re: [AFMUG] POE Fusing I could have used one of those two days ago when I plugged into a cat5 with 48HV 1.5, the wire chec

Re: [AFMUG] POE Fusing

Ancient technology called a “telephone”. From: Jaime Solorza Sent: Sunday, December 3, 2017 11:19 AM To: Animal Farm Subject: Re: [AFMUG] POE Fusing What is that thing on right above netonix on wall with curly wire? Jaime Solorza On Dec 3, 2017 10:43 AM, wrote: Running some endurance te

Re: [AFMUG] POE Fusing

Any passive POE. Cheap insurance. -Original Message- From: Craig House Sent: Sunday, December 3, 2017 10:44 AM To: af@afmug.com Subject: Re: [AFMUG] POE Fusing what is the POE fuse for? Is it to save the Netonix ports from shorts? Craig - Original Message - From: ch...@wbm

Re: [AFMUG] POE Fusing

I could have used one of those two days ago when I plugged into a cat5 with 48HV 1.5, the wire checked out fine with the tester in the Netonix with opens at the length of all the wires. But turned on the power and poof, there goes a 12-250-DC... Totally dead... Right now I would say one o

Re: [AFMUG] POE Fusing

We have blown a few Netonix ports when a short has happened on the POE out. Probably a good idea just for protecting the switch power output. bp On 12/3/2017 9:44 AM, Craig House wrote: what is the POE fuse for? Is it to save the Netonix ports from shorts? Craig - Original Message ---

Re: [AFMUG] POE Fusing

What is that thing on right above netonix on wall with curly wire? Jaime Solorza On Dec 3, 2017 10:43 AM, wrote: > Running some endurance tests on the latest rev of the inline POE fuse. > > Netonix is providing the power. Inline POE fuse connected to short red > CAT5 with LEDS. 2 Green LEDs o

Re: [AFMUG] POE Fusing

what is the POE fuse for? Is it to save the Netonix ports from shorts? Craig - Original Message - From: ch...@wbmfg.com To: af@afmug.com Sent: Sunday, December 3, 2017 11:42:38 AM Subject: [AFMUG] POE Fusing Running some endurance tests on the latest rev of the inline POE fuse. Neton