đź‘Ť
On Mon, Jan 15, 2018 at 9:23 PM Sterling Jacobson
wrote:
> Plat is great, and Sonar costs more, but I wanted a more modern system and
> I was constantly fighting small glitches and bugs in the system including
> PCI compliance.
>
>
>
> Also I don’t want to host anything myself anymore, it’s a
I have many other releases but not that one.
On Mon, Jan 15, 2018 at 3:38 PM, George Skorup
wrote:
> Looking for ExtendAir G2 release 1.2.2. Anybody have it?
>
I'll check
On Jan 15, 2018 3:38 PM, "George Skorup" wrote:
> Looking for ExtendAir G2 release 1.2.2. Anybody have it?
>
Four-way Internet or something like that is pretty close I think.
On 1/16/2018 12:16 AM, Robert wrote:
Any wireless providers thereabout?  I have a customer that is looking
for a secondary besides Comcast and says there are too many trees and
it's too flat for any wireless providers down there
I have a Verizon owned tower on a piece of my property. Verizon pays the
rent every month.
Travis
On 1/15/2018 6:17 PM, Darin Steffl wrote:
Verizon doesn't own their towers anymore. They sold every one to
American Tower.
So it must be AT that you're looking at.
On Jan 15, 2018 6:28 PM, "TJ
What was that product that I think Rick and Patrick were both working with a
couple of years ago that was supposed to be the be-all and end-all for NLOS
/tree performance.
Remember some preliminary test results then nothing. I just don't remember
the brand or the outcome.
Did it work?
Is the
Baicells
-
Mike Hammett
Intelligent Computing Solutions
Midwest Internet Exchange
The Brothers WISP
- Original Message -
From: ch...@wbmfg.com
To: af@afmug.com
Sent: Tuesday, January 16, 2018 9:53:18 AM
Subject: Re: [AFMUG] Memphis
What was that product that I thin
Did it live up to the promises?
From: Mike Hammett
Sent: Tuesday, January 16, 2018 8:58 AM
To: af@afmug.com
Subject: Re: [AFMUG] Memphis
Baicells
-
Mike Hammett
Intelligent Computing Solutions
Midwest Internet Exchange
The Brothers WISP
--
I spoke with versatek yesterday and they were pretty helpful. I have been
buying their gear for a while now and am happy with them. The min 8 port
DSLAM is about $800 and the 24 port is about $1400.
On Mon, Jan 15, 2018 at 2:49 PM, Dave wrote:
> Curious about this as we too have an older Dslam
It works as well as you would expect the 3.65 follow-up to wimax to work,
and maybe then some. Nothing magical about the NLOS capabilities though.
On Tuesday, January 16, 2018, wrote:
> Did it live up to the promises?
>
> *From:* Mike Hammett
> *Sent:* Tuesday, January 16, 2018 8:58 AM
> *To:* a
It seemed to me that there was a field test claiming to go through solid rock
or some such thing.
From: Jason McKemie
Sent: Tuesday, January 16, 2018 9:36 AM
To: af@afmug.com
Subject: Re: [AFMUG] Memphis
It works as well as you would expect the 3.65 follow-up to wimax to work, and
maybe the
It'd be going around (bouncing off of something) as opposed to through.
-
Mike Hammett
Intelligent Computing Solutions
Midwest Internet Exchange
The Brothers WISP
- Original Message -
From: ch...@wbmfg.com
To: af@afmug.com
Sent: Tuesday, January 16, 2018 10:39:10 AM
It lives up to the promise of being reasonable priced LTE gear, and it
works fine. If I had been expecting it to perform the same as 900mhz does
(or did, when 900mhz was actually usable...) in NLOS, then I'd probably be
a bit disappointed... being LTE, it does do better in NLOS than, say,
Canopy 45
For us, it goes a little further than 2.4, but not as far as 900.
- Original Message -
From: Mathew Howard
To: af
Sent: Tuesday, January 16, 2018 10:46 AM
Subject: Re: [AFMUG] Memphis
It lives up to the promise of being reasonable priced LTE gear, and it works
fine. If I
Too lazy to look for the batch of promises that were made during initial
testing, but I am pretty sure it was supposed to work much better than 900.
From: CBB - Jay Fuller
Sent: Tuesday, January 16, 2018 9:50 AM
To: af@afmug.com
Subject: Re: [AFMUG] Memphis
For us, it goes a little further th
Is it possibly to get a lease land for a tower for one of these big
companies and then have in the lease that you are allowed to put antennas
on that tower as part of the agreement rent free?
On Tue, Jan 16, 2018 at 10:33 AM, Travis Johnson wrote:
> I have a Verizon owned tower on a piece of my
if you have a lot of interference in the 900 band, it does work much better
than 900 LOL
fortunately our 900 still works pretty good here. We have one area where it
does not but it is due to an "operator" nearby
who does not believe in gps sync for canopy
- Original Message -
Fr
Anything's negotiable right??
On Jan 16, 2018 11:59 AM, "Kurt Fankhauser"
wrote:
> Is it possibly to get a lease land for a tower for one of these big
> companies and then have in the lease that you are allowed to put antennas
> on that tower as part of the agreement rent free?
>
> On Tue, Jan 1
I am old school... still believe 900 will work better than 3.65 in NLOS.
So the Cambium 900 solution isn't cutting it?
Jaime Solorza
On Jan 16, 2018 10:05 AM, "CBB - Jay Fuller"
wrote:
>
> if you have a lot of interference in the 900 band, it does work much
> better than 900 LOL
> fortunately
Years ago, back when cell towers were still a novelty item, we worked
with a municipality where they forced the cellco to massively oversize
the tower, which was located on city property, so the city could do with
it what they wanted. I think they allowed the tower to be put up, so
they got us
All things being equal, 900mhz does work better than 3.65ghz in NLOS, and
it always will. The Cambium 900mhz solution works quite nicely... where it
works. The problem is that half of our sites either never worked very well
because of interference, or one day they just start working like crap
becau
Note: According to the ExtendAir G2 1.4.3 upgrade notes, if you have very
early firmware you can upgrade your link to 1.1.0 then jump straight to
1.4.2 (which needs to be programmed in twice for reasons that I don't fully
understand), then to 1.4.3. I can send you 1.1.0 firmware if you want.
On Mo
Programming twice usually means there are two firmware banks and you're
bringing both up to that version. I suspect there's some big change where the
old firmware won't work anyway, so you need to flash twice to avoid
accidentally rolling back to a firmware that won't work anymore.
Speculation
To anyone else who has had issues contacting Exalt Communications support (
supp...@exaltcom.com seems to have had issues for some time), I was using
an alternate e-mail address at a support subcontractor that has worked
well: exaltsupp...@starmicrowave.com .
If you need earlier radio firmware, I
I have 5 towers where that is almost exactly what I have. I can put up
equipment that is equal to or lesser than some config I listed out at the
time of the agreement. The only thing I have to pay is electricity which is
set at $50 per month per active site. I pay that annually.
On Tue, Jan 16, 20
I would move to Sonar just to avoid Platypus for the most part. That's
before we even discuss the more modern tools and capabilities.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Jan 15, 2018 at 10:23 PM, Sterling Jacobson
wrote:
> Pla
I have used the cambium 3.65Ghz PMP450 and PMP450i since its debut.
I have been very happy with performance and reach for this band. I run
10Mhz channels and most connections are 8x8x to 8x2x as expected
when going through some tough tree like pines.
Most of our cell ranges are sitting around 8m
Hi.
I actually ran those tests with Performant/Accedian, which caused UBNT to
put flow control in. Inband management will still cause issues. Your max
throughput will drop, but it should be stable. I still have the old test
results around here somewhere.
Remember, these radios have like virtually
Yes, there are two software banks/flashes in the ExtendAir G2.
On 1/16/2018 11:56 AM, Mike Hammett wrote:
Programming twice usually means there are two firmware banks and
you're bringing both up to that version. I suspect there's some big
change where the old firmware won't work anyway, so you
I ended up disabling inband management on the remote end temporarily, and
got the same results... We are likely replacing the radio set with
something that is actually 1GbE line rate and will pass frames sequentially.
On Tue, Jan 16, 2018 at 4:03 PM, Josh Reynolds wrote:
> Hi.
>
> I actually
https://youtu.be/snk3C4m44SY
OMG! that is hilarious!
On Tue, Jan 16, 2018, 7:33 PM Chuck McCown wrote:
> https://youtu.be/snk3C4m44SY
>
Traffic is back, actually higher than normal today.
Interesting that MLK affects folks that go to my site.
Many small business do not give MLK off to their employees.
And I presumed the small businesses were my main visitors.
From: Chuck McCown
Sent: Monday, January 15, 2018 2:34 PM
To: af@a
I read a book or magazine article about this. Probably something in the
Smithsonian or Atlantic. Was fascinating.
Looks like it will be worth watching tonight.
http://www.pbs.org/wgbh/americanexperience/features/secret-tuxedo-park-trailer/
What a maroon!!! Nyak Nyak
Jaime Solorza
On Jan 16, 2018 6:44 PM, "Lewis Bergman" wrote:
> OMG! that is hilarious!
>
> On Tue, Jan 16, 2018, 7:33 PM Chuck McCown wrote:
>
>> https://youtu.be/snk3C4m44SY
>>
>
Are you using a 17a or 30a profile with that?
On Mon, Jan 15, 2018 at 9:56 AM, Rob Genovesi
wrote:
> Sam,
>
> Modems are syncing at ~100 Mbps DL and ~50 Mbps UL. We rate limit
> with a Mikrotik at the head-end. Loop lengths are very short, under
> 1kft. We use SmartRG modems (SR515ac) which a
Good question! Ours is at 17a (the default). 30a is unnecessary
because we're rate limiting lower speeds (capacity constrained by
microwave back haul).
On Tue, Jan 16, 2018 at 6:09 PM, Eric Kuhnke wrote:
> Are you using a 17a or 30a profile with that?
>
> On Mon, Jan 15, 2018 at 9:56 AM, Rob
what brand of camera is that? nice night time image.
On Tue, Jan 16, 2018 at 9:56 PM, Jaime Solorza
wrote:
> Installed this PTZ Speed Dome IP camera at booster site in Fabens. It's
> online via Cradlepoint LTE 4G router along with two other IP cameras. Once
> construction of building done we wi
That's one of the ~$300 ones? I love them. Going to be setting up a
bunch!
On 1/16/18 6:56 PM, Jaime Solorza wrote:
Installed this PTZ Speed Dome IP camera at booster site in Fabens. It's
online via Cradlepoint LTE 4G router along with two other IP cameras.
Once construction of building do
39 matches
Mail list logo