://www.ics-il.com
--
*From: *Darin Steffl via Af af@afmug.com
*To: *af@afmug.com
*Sent: *Sunday, December 21, 2014 9:30:44 AM
*Subject: *Re: [AFMUG] OT Oh holy oracle of AF
Mike,
The only guys I know that use belt clips to hold their phone are at wispa
shows
Hey all,
We normally only use RP-SMA pigtails from radio to antenna but we now need
to find some good pigtails that are N-Male to RP-SMA. Does anyone have a
good quality cable with low loss and if so, what distributor and part # of
the pigtail you order? Thanks
--
Darin Steffl
Minnesota WiFi
Yep we see this issue on an 18 mile link but not on a 5 mile link..Ubiquiti
hasn't been able to figure it out yet so we're pulling the equipment out.
On Thursday, December 18, 2014, Jerry Richardson (airCloud)
jrichard...@aircloud.com wrote:
Anyone seeing their AC links disconnecting for no
You've got the pricing wrong. Each end is about $3,000 for the 1200FX but
the complete link with POE is as cheap as $6,100 total, not $3k.
On Tue, Dec 16, 2014 at 7:44 PM, Gino Villarini via Af af@afmug.com wrote:
Where??
Gino A. Villarini
President
Aeronet Wireless Broadband Corp.
Ha that's great. Now add snow and ice to that and we would probably wait to
install until spring when lights and ice are off.
On Sun, Dec 14, 2014 at 2:37 PM, Jeremy via Af af@afmug.com wrote:
...like walking in a minefield. It's like I'm doing an install for the
Griswalds.
--
Darin
Hey all,
I am following the guide below to setup WAN failover from us as a primary
to a DSL connection as a backup. I understand everything except the
routing-mark that I'm supposed to have configured already. I believe I am
supposed to mark packets or connections in IP/Firewall/Mangle but I've
Hey guys,
What are you using for installers when on snowy/icy roofs for customer
installs. Obviously we can't just have them wearing tennis shoes or even
most boots as they'll slip and fall. We are looking for a solution that
gives them a more secure grip that can eat into the ice and grab that
I have one at home to play with. I generally like it but for now you can
only support and manage it with an Android or iOS app with no cloud
support... yet. They say it is coming so we can manage multi-site and
remotely like UniFi but for now you have to be on the layer2 network with
the AP's to
[mailto:af-boun...@afmug.com
javascript:_e(%7B%7D,'cvml','af-boun...@afmug.com');] *On Behalf Of *Darin
Steffl via Af
*Sent:* Sunday, November 9, 2014 8:31 PM
*To:* af@afmug.com javascript:_e(%7B%7D,'cvml','af@afmug.com');
*Subject:* Re: [AFMUG] Has anyone worked with the Ruckus Xclaim yet?
I
Hey guys,
For fiber runs to a switch or radio on top of the tower, do you recommend
non-armored fiber or armored with the metal shield? If there a way to have
armored fiber without metal inside?
I'm wondering how some of you run fiber up to the top now and if having
metal in the fiber is alright
Steffl via Af af@afmug.com
*Sent:* Saturday, November 08, 2014 1:47 PM
*To:* af@afmug.com
*Subject:* [AFMUG] Fiber to top of tower
Hey guys,
For fiber runs to a switch or radio on top of the tower, do you recommend
non-armored fiber or armored with the metal shield? If there a way to have
there including:
double jacket non-armor (series 1G)
ADSS 100/200/400
heavy duty LT (series 1H)
*From:* Darin Steffl via Af
*Sent:* Saturday, November 08, 2014 3:57 PM
*To:* af@afmug.com
*Subject:* Re: [AFMUG] Fiber to top of tower
So you're saying don't go armored fiber at all but just
You can go prepaid hotspot for them. Straight talk has a 3G hotspot out
today but there's also some 4G LTE version at Walmart just coming out. For
phone, get straight talk home phone which is about $17 after taxes.
Otherwise check the cell carriers for data only hotspot options. Sprint
does 3GB
Why can't you lay a fiber spool on its side?
On Sunday, November 2, 2014, Carlos Alcantar via Af af@afmug.com wrote:
+1 on this we have actually complained enough about this the vendor
that we usually buy most of our cable from give us an extra 20’. We have
also refused 20k feet of fiber
Hey guys,
I went back and looked at the emails about the ePMP PTP product and it
includes a 25 db dish and radio for about $200. The radio is said to be the
$500 sync AP with GPS disabled. Is there ANY way we can order the PTP radio
now with GPS disabled instead of waiting for December to roll
I agree and was waiting to see if someone else would bring it up. It only
shows the name so I have no way of seeing the actual sender email address
to bring something off-list.
On Fri, Oct 31, 2014 at 10:15 AM, tcidan via Af af@afmug.com wrote:
Since the change to the new mailing list host, the
[mailto:af-boun...@afmug.com] *On Behalf Of *Darin Steffl via
Af
*Sent:* Friday, October 31, 2014 9:43 AM
*To:* memb...@wispa.org; af@afmug.com; Principal WISPA Member List
*Subject:* [AFMUG] ePMP PTP mode access point
Hey guys,
I went back and looked at the emails about the ePMP PTP product
I see names fine but not email addresses.
On Fri, Oct 31, 2014 at 10:37 AM, Jeff Broadwick - Lists via Af
af@afmug.com wrote:
I see the names when I look in Outlook, but not on my IPhone.
Jeff Broadwick
ConVergence Technologies, Inc.
312-205-2519 Office
574-220-7826 Cell
Alcoma has the lowest cost per meg.
On Monday, October 27, 2014, Peter Kranz via Af af@afmug.com wrote:
Has anyone shopped full Gig licensed links lately, which is the best
bargain?
*Peter Kranz*Founder/CEO - Unwired Ltd
www.UnwiredLtd.com http://www.unwiredltd.com/
Desk: 510-868-1614
Did you guys not listen and read the presentation screen? Beta units
shipping over next few weeks and and pre-order links shipping in December
for backhaul line.
On Wed, Oct 15, 2014 at 12:42 AM, Stefan Englhardt via Af af@afmug.com
wrote:
Ahhh found it. Did not press the Pre-Order button.
Weeks old.
*Von:* Af [mailto:af-boun...@afmug.com] *Im Auftrag von *Darin Steffl via
Af
*Gesendet:* Mittwoch, 15. Oktober 2014 09:45
*An:* af@afmug.com
*Betreff:* Re: [AFMUG] Mimosa announcement
Did you guys not listen and read the presentation screen? Beta units
shipping over next
winds, which the gear itself
isn't rated for anyway.
Josh Reynolds, Chief Information Officer
SPITwSPOTS, www.spitwspots.com
On 10/07/2014 02:00 PM, Darin Steffl via Af wrote:
Hey guys,
Is there a way or do you recommend adding a support brace to the
RocketDish 34db 3 foot dish at all
Hey Matt,
Did you get these enclosures ordered at all and have pictures? What do you
think? Are they the best priced you could find the those dimensions? I'm
looking as well and everything seems so expensive.
On Thu, Mar 13, 2014 at 2:49 PM, Matt Jenkins m...@smarterbroadband.net
wrote:
Here
Love the sounds of it but we wouldn't be able to eat the cost for every new
customers because right now, it is easy enough for us to run speedtests
through our CPE antenna on the roof. After that, we can at least see if the
router is negotiating at 100mb or 10mb which would indicate a wiring
Does anyone have transport through Centurylink at all? Not internet but
just transport to a datacenter to pick up bandwidth. I have a bandwidth
broker checking pricing for me but he believes we can get 1Gbps of
transport for $1,500-1,800 on a 3-year contract.
Anyone else use them and have pricing
the bandwidth test with TCP testing. If you can, run a traceroute from you
to us as well and the results. Thank you all
On Wed, Oct 1, 2014 at 2:21 PM, Darin Steffl via Af af@afmug.com wrote:
Adam,
I believe I fixed both items there. Try again. Thanks
On Wed, Oct 1, 2014 at 2:17 PM, TJ Trout via
AM, Jon Langeler wrote:
The Hartford. Would have to look everything up...
Jon Langeler
Michwave Technologies, Inc.
On Sep 29, 2014, at 9:03 AM, Darin Steffl via Af af@afmug.com wrote:
Bump. Anyone? Thanks
On Friday, September 26, 2014, Darin Steffl via Af af@afmug.com wrote:
Hey all
Hey guys,
We are looking for a reasonably priced source for pipe to pipe clamps and
other hardware to attach our mounts to towers and railings on grain legs,
etc. We are looking to strengthen our future tower builds and move up from
our more amateur way of attaching pipes to our tower structures.
Last we checked $700 on one year contract and free NRC
On Saturday, September 27, 2014, Matt via Af af@afmug.com wrote:
What is going rate for gig of Cogent at the datacenter?
--
Darin Steffl
Minnesota WiFi
www.mnwifi.com
507-634-WiFi
http://www.facebook.com/minnesotawifi Like us on
29 matches
Mail list logo
