Re: [AFMUG] Micro cell with NAT mode FSK

2014-12-26 Thread Vince West via Af
The best way we found to combat this issue was set up the SM in bridged mode and provide the customer with a PPPoE connection. Vince West Tower Hand Technical Support Shelby Broadband 148 Citizens Blvd Simpsonville, KY 40067 Phone: 1-888-364-4232 On Fri, Dec 26, 2014 at 1:29 PM, Ken Hohhof via Af

Re: [AFMUG] OT Oh holy oracle of AF

2014-12-22 Thread Vince West via Af
I like the OnePlus One as well. Does this one have LTE? I wasn't sure about that. If you want too many choices to handle: ArsTechnica: The State of Smartphones 2014 I have a Nexus 5 which, afte

Re: [AFMUG] Mikrotik Virtual AP

2014-11-27 Thread Vince West via Af
I just replaced equipment on a site for an ePMP conversion. I installed a RB911G-2HPnD with a virtual AP. It works wonderfully. We used to use the RB951-2n routers for customers, but we had a lot of issues with them between really poor coverage and some interesting wireless issues. We moved over t

Re: [AFMUG] wind speed cut off for climbing

2014-11-24 Thread Vince West via Af
I don't climb when winds are expected to exceed 25mph (assuming higher gusts). I agree, it does depend on the work to be done. Wintery snow, sleet and snow means temps are likely at or below 32°F. If that is the case, crank up some wind and it is colder. Add rain, sleet, snow, and you have a green

Re: [AFMUG] Favorite 5GHZ dual pole dishes

2014-11-03 Thread Vince West via Af
The JRC-24 EXTREM and the JRC-29 EXTREM support 5.0 - 5.95 Ghz. There are 5 versions of each size. There are two version of each size that range. Vince West Tower Hand Technical Support Shelby Broadband

Re: [AFMUG] Local source for silicon grease (Corning 4)

2014-10-10 Thread Vince West via Af
We use Boss 440 Silicone General Purpose Compound for radio and Ethernet connections. If you are a DirecTV reseller you can get it from Perfect10 . It does the jo

Re: [AFMUG] Power up the tower?

2014-10-03 Thread Vince West via Af
Kade, I can't speak on the fiber, because we have used a few different kinds over the builds we have done. My favorite has been bend insensitive fiber. It is small and can make the same turns the Ethernet and power can without risking a break. It is also really thin and makes for easier movement w