PMP100 gear is relatively new to me (in use on some existing networks I've
just starting repairing).
I have a P9 AP running v9.5 firmware that I'd like to upgrade to v13.4. I
just moved a few other P10 APs up to v13.4 without issue, but this one AP
is not recognized by CNUT.
Is there a trick to g
When you try to refresh that AP in CNUT, do you get no SNMP response? Or
what does it do exactly? Or how about what errors does CNUT spit out? I
would start by checking the SNMP communities and Accessing Addresses on
the radio. If you inherited it, it's probably something that simple.
BTW, I'v
8:29 PM
To: af@afmug.com
Subject: Re: [AFMUG] CNUT Not Recognizing PMP100 900MHz P9 v9.5 Firmware
When you try to refresh that AP in CNUT, do you get no SNMP response? Or
what does it do exactly? Or how about what errors does CNUT spit out? I
would start by checking the SNMP communities and
Bingo, "No SNMP Response". SNMP tab had some old info. Thank you!
A follow-up question. In CNUT, the SMs are auto-detected. After stating
"Discovered", when I attempt an update, it states "Unable to communicate
with the Network Element. Error:No SNMP response". If I manually enter the
IP address,
The auto discovery list populates when you refresh an AP. It's basically
the AP LUID table, aka SM session status list. And no, you cannot select
auto discovered elements and directly update them. What you need to do
here is select an AP and enable auto-update. That will upload the
software ima
