Thanks for the reply and the help! I was missing something small, and
overthinking something else
Thanks again,
Heith
From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup
Sent: Wednesday, April 06, 2016 11:07 PM
To: af@afmug.com
Subject: Re: [AFMUG] PPPoE with VLAN on
Yeah that is exactly how I have done it in the past. I do recommend
upgrading. Vlans and PPOE I found were unreliable up until v12
On 4/6/2016 11:06 PM, George Skorup wrote:
Enable VLAN on the AP, save and reboot. Set Default Port VID to the
desired VLAN ID# on the SM(s), save and reboot. That
Enable VLAN on the AP, save and reboot. Set Default Port VID to the
desired VLAN ID# on the SM(s), save and reboot. That should put the
PPPoE/NAT interface on that VID. I haven't messed with NAT and VLANs on
Canopy though.
The AP with VLAN enabled basically becomes a VLAN trunking device. So
Hello,
I need some configuration help on Cambium. We are wanting to configure the
Canopy subscriber module (v11.2) to be the PPPoE client and NAT the
customer's traffic from the Ethernet port. This works fine, of course, but
we need the PPPoE to be on a tagged VLAN and we're. Not quite sure how