Re: [AFMUG] Tower Question

2017-12-04 Thread Craig House
gt; -- Original Message -- > From: "Craig House" <cr...@totalhighspeed.net> > To: af@afmug.com > Sent: 12/3/2017 2:40:17 PM > Subject: Re: [AFMUG] Tower Question > >> That’s correct. >> >> Sent from my iPhone >> >>> On Dec 3,

Re: [AFMUG] Tower Question

2017-12-04 Thread Adam Moffett
Ya know I never measured one. Is it actually 10' from bolt hole to bolt hole? -- Original Message -- From: "Craig House" <cr...@totalhighspeed.net> To: af@afmug.com Sent: 12/3/2017 2:40:17 PM Subject: Re: [AFMUG] Tower Question That’s correct. Sent from my iPhone

Re: [AFMUG] Tower Question

2017-12-03 Thread chuck
This photo shows 10’ overall. So does one from Rohn. https://www.3starinc.com/images/super/ROHN_25G_800x600t.jpg From: Craig House Sent: Sunday, December 3, 2017 12:58 PM To: af@afmug.com Subject: Re: [AFMUG] Tower Question I’ll measure one when I get home in an hour. I’ve got 200 sections

Re: [AFMUG] Tower Question

2017-12-03 Thread chuck
If you could measure the distance between the lattice “steps” too it would be helpful. I am tracing drawings from things on the web. Rather have some dimensions. From: Craig House Sent: Sunday, December 3, 2017 12:58 PM To: af@afmug.com Subject: Re: [AFMUG] Tower Question I’ll measure

Re: [AFMUG] Tower Question

2017-12-03 Thread Craig House
Craig House > Sent: Sunday, December 3, 2017 12:40 PM > To: af@afmug.com > Subject: Re: [AFMUG] Tower Question > > That’s correct. > > Sent from my iPhone > >> On Dec 3, 2017, at 13:26, <ch...@wbmfg.com> <ch...@wbmfg.com> wrote: >>

Re: [AFMUG] Tower Question

2017-12-03 Thread chuck
Is it 4” exactly? From: Craig House Sent: Sunday, December 3, 2017 12:40 PM To: af@afmug.com Subject: Re: [AFMUG] Tower Question That’s correct. Sent from my iPhone On Dec 3, 2017, at 13:26, <ch...@wbmfg.com> <ch...@wbmfg.com> wrote: I find drawings showing 25G and 45G to

Re: [AFMUG] Tower Question

2017-12-03 Thread Craig House
That’s correct. Sent from my iPhone > On Dec 3, 2017, at 13:26, wrote: > > I find drawings showing 25G and 45G tower sections being 10’ end to end. But > that would cause the tower to lose a few inches due to the telescoping at > each junction between

[AFMUG] Tower Question

2017-12-03 Thread chuck
I find drawings showing 25G and 45G tower sections being 10’ end to end. But that would cause the tower to lose a few inches due to the telescoping at each junction between sections. So, I am guessing it is 10’ plus whatever length telescopes when mating the sections. Line 4”??