grub 2.12 problem (don't load local grub)

Hello, We have a problem in grub 2.12. We deploy our servers using network grub 2.12, and after deploying the server, network grub uses the exit command to exit and load the local grub. The problem is that instead of downloading the local grub, we switch to the BIOS settings. Previously, on versio

Re: [Cin] Is one pre-built dynamic and static binary for user selection possible?

The error: >configure: error: Could not find working FFTW library Do you have something like fftw-devel package on your system? сб, 21 сент. 2024 г., 20:10 Terje J. Hanssen via Cin < cin@lists.cinelerra-gg.org>: > > > Den 21.09.2024 17:01, skrev Andrew Randrianasulu: > > > [snip] > > >> >> sorry

Re: [Cin] Is one pre-built dynamic and static binary for user selection possible?

Terje, Here is list of suse packages from my suse build host: "libusb-devel", "fftw-devel", "flac-devel", "libXv-devel", "ncurses-devel", "texinfo", "libogg-devel", "libvorbis-devel", "libx264-devel", "libx265-devel", "libsndfile-devel", "libtiff-devel", "ffmpeg-devel", "lv

Внедрение Early Hints

Планируется ли внедрение фичи Early Hints в nginx и если нет, то очень хочется узнать почему.   есть модуль 8-ми летней давности и все...   интересует в первую очередь проксирование proxy_pass, http/2, http/3     С уважением, Андрей Голубев 44

Re: [Cin] Hardware acceleration methods

>Is there something that prevent typical QSV to be prebuilt in the CinGG/FFmpeg rpm? The ffmpeg not installed on my suse build host. If you how to enable QSV, I'll change the build script. Best regards, Andrey пт, 13 сент. 2024 г., 20:17 Terje J. Hanssen via Cin < cin@lists.cinelerra-gg.org>:

Re: [Cin] How to access a second Intel iGPU in a workstation with additional discrete Nvidia GPU?

This is proof that discrete Intel Arc use the same old hardware acceleration block for encoding Best Regards, Andrey вт, 10 сент. 2024 г. в 18:35, Terje J. Hanssen via Cin < cin@lists.cinelerra-gg.org>: > > > Den 31.08.2024 00:58, skrev Terje J. Hanssen: > > I am stuck how to configure QSV acce

Re: [Slackbuilds-users] Orphaning my SlackBuilds

On Sat, Sep 7, 2024, 14:57 Dominik Drobek wrote: > Status after last update: > > Scripts with new maintainers: >games/OpenXcom -> B. Watson >graphics/gcolor2 -> B. Watson >network/aircrack-ng -> pyllyukko >network/macchanger -> B. Watson >system/pigz -> Brandon Pribula > > Han

Re: [Slackbuilds-users] Orphaning my SlackBuilds

Hi Dominik, If not already taken, I'll grab latexdiff Cheers Andrei On Sun, Sep 1, 2024, 00:54 Dominik Drobek wrote: > Hi everyone, > > I'm moving away from Slackware, so please consider my SlackBuilds > orphaned. Feel free to change the license if you wish. > > > audio/MP3Diags: can be updat

Re: [PATCH 1/2] printf: fix heap buffer overflow in printf_builtin

Hi there! I completely understand your point of view. Although I made a few mistakes when writing the patch, I wrote patch for a reason. I was doing fuzzing testing in bash4, and at some point during fuzzing, ASAN (AddressSanitizer) was launched. This problem also existed in the master branch

Re: [Cin] SVT-AV1 library upgraded to v2.2.1

Terje, can you check rpm, if it works for you? вс, 25 авг. 2024 г., 12:38 Terje J. Hanssen via Cin < cin@lists.cinelerra-gg.org>: > > On 24.08.2024 20:13, Phyllis Smith via Cin wrote: > > The SVT-AV1 library was at version 1.8.0 and finally I got it upgraded and > checked into GIT. At first I h

Re: [Cin] SVT-AV1 library upgraded to v2.2.1

Phyllis, right now I am trying to add the "--enable-libsvtav1" flag to build farm. Best regards, Andrey пн, 26 авг. 2024 г. в 18:50, Phyllis Smith via Cin < cin@lists.cinelerra-gg.org>: > *Terje,* > Not sure why it reports it as SVT-AV1 Encoder Lib v2.2.0 because I > downloaded what is reported

Re: nginx-1.27.1

очих процессов. >   Спасибо Kasei Wang. > >*) Исправления в HTTP/3. > > >-- >Sergey Kandaurov > >___ >nginx-ru mailing list >nginx-ru@nginx.org >https://mailman.ngin

Re: Не отключает пул upstream при одном сервере и 502 ошибках

нашел в доке, что 1 сервер никада...   >Четверг, 8 августа 2024, 13:06 +03:00 от Андрей Голубев via nginx-ru >: >  >имеем >  >proxy_next_upstream error http_502 http_503 non_idempotent; >  >upstream 0001f633 { >    server 10.237.*.*: weight=1 max_fails=1 fail_ti

Не отключает пул upstream при одном сервере и 502 ошибках

сервер не идут, давая ему продышаться.   куда копнуть?   С уважением, Андрей Голубев 44...@mail.ru___ nginx-ru mailing list nginx-ru@nginx.org https://mailman.nginx.org/mailman/listinfo/nginx-ru

Re: [Cin] New release AppImages with all having x265 10/12 bit encode

Thank you Phyllis, the ubuntu build is almost ready, and will be uploaded soon. It builds successfully, but fails to upload to github. Best regards, Andrey ср, 31 июл. 2024 г., 21:45 Phyllis Smith via Cin : > There are new AppImages at: https://cinelerra-gg.org/download/images/ > All of the i

cant login if --- (Filesystem / Use 100%)

Cant login without any massage, when do not free space on disk. I did this issue: https://gitlab.gnome.org/GNOME/gnome-keyring/-/issues/154 and me to tell this: Feel free to file this in the issue tracker of your distribution https://gitlab.gnome.org/GNOME/gnome-keyring/-/issues/154 Thank

Re: [Cin] Major Problem with AppImage

>For Debian *Trixie* (not officially released yet), install libfuse2t64. I think a package suffix 't64' is temporary in Trixie. So we have to check that later, then debian 13 will be released. пн, 22 июл. 2024 г., 23:20 Phyllis Smith via Cin : > Andrea, > No problem, I misunderstood. I am just

Re: [Cin] How to identify if a running CinGG is the Regular or Multibit version?

> I, too, wonder whether einhander binaries are 8-bit or multibit. I use the default build scripts with a minor changes, so I think it's 8-bit. Should I change 8-bit version to multibit? Or make a separate 8-bit, multibit and 10-bit version? Best regards, Andrey сб, 13 июл. 2024 г., 17:31 Terje

Re: [Cin] GPU acceleration

>The main issue now is not being able to use my Nvidia GPU. What type of installation of Cinelerra-GG do you use? Appimage has issues with hardware acceleration. вт, 25 июн. 2024 г., 09:24 David Koski via Cin : > I've been trying hard to love Cinelerra but it is pushing my limits. > The main is

Index allocation

Hi everyone. I'm looking for some examples or guidance on how to use the "Index allocation" in subagent. (RFC2741, 7.1.4.2.2) Any help would be hugely appreciated. Thank you. ___ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please se

Re: [Cin] ffmpeg 7.0 soon to be released

>I do not currently see suse15 there Thanks Phyllis, something went wrong with upload to GitHub. I just uploaded it manually via website. GitHub not very friendly to simple tools like ssh. Best regards, Andrey чт, 23 мая 2024 г., 23:14 Phyllis Smith via Cin : > Reminder for those with recent ve

Re: [Cin] Cinelerra-HV 9 is out!

>Also, it was suggested that we (cinelerra-gg) can create different git branch < named, say, "testing" > for "potentially unstable" patches, like current ffmpeg 7.0 patchset and then merge back to main/stable when feature is deemed ready. +1 for testing branch. Best regards, Andrey пн, 20 мая

Bug#1065319: notfound 1065319 in 0.5.2-1

It's a bug in upstream, see https://github.com/pwmt/zathura/issues/447 Best regards, Andrey

Bug#1065319: notfound 1065319 in 0.5.2-1

Hi Jacob, Sorry for the direct email, but your reply in the mail list did not reach me. I've found it only via a web site. Could you check versions in testing and sid. I believe that the 0.5.2 version in bookworm is OK. Now I use zathura 0.5.6. It has the same problem. > notfound 1065319 0.5.2-

Re: what is right place to load subagent configuration

I was able to catch the temporary file generated by net-snmp-config and learnt from it that I can just write manually init_MyModuleName and shutdown_MyModuleName functions and should be good. Thanks, the question is closed. вт, 7 мая 2024 г. в 15:17, Андрей Лобов : > And another related quest

Re: what is right place to load subagent configuration

And another related question - how to hook on agent shutdown in order to properly release the resources. Thanks, Andrey пн, 6 мая 2024 г. в 18:03, Андрей Лобов : > He everyone, > > I write subagent, referring to the guide > http://www.net-snmp.org/wiki/index.php/TUT:Writing_a_Subag

[bareos-users] Help understand how use pools

I have few different storage machine. Should I need for each storage create self pools? Or i can use one pool for jobs from different storage. I try use one pool for different storage and have error: Open device "FileStorage" (/var/lib/bareos/storage) Volume "Vol-7days-4298" failed: ERR=stored/d

what is right place to load subagent configuration

He everyone, I write subagent, referring to the guide http://www.net-snmp.org/wiki/index.php/TUT:Writing_a_Subagent So far so good - I'm able to get the simple scalar metric. Now I need to use some parameters, which should be loaded from configuration files. >From what I got I need to use register

Re: [Cin] ffmpeg 7.0 soon to be released

After reading the mail list, I thought that some test cases are needed to test plugins after migrating from ffmpeg 6.1 to 7.0. And then compare the new videos with the old ones in semi-automatic mode. I found that ffmpeg a able to produce diff-like videos with the blend filter for video: https://

Re: [Cin] A potential HTML manual problem under NTFS/FAT filesystems

There no problem for ntfs and fat32 for a modern Windows systems. The case-sensitive filenames display supported since Windows 7 SP1. The problem with case-sensitivity can be only on fat32 on Windows XP. I think it's a minor issue. вс, 14 апр. 2024 г., 10:09 Georgy Salnikov via Cin < cin@lists.c

Re: [Cin] Latex problem

I think that it should be commented out for now, and removed in the near future. пн, 8 апр. 2024 г. в 19:50, Andrea paz : > Hi, > I simply commented out that line and now everything works fine. Is it > possible to remove it permanently? I couldn't find any \substitutefont > entries in the code, s

Re: [Cin] Latex problem

Hi Andrea, The substitutefont package is obsolete. Quote from https://www.ctan.org/pkg/substitutefont: > This package used to facilitate the task of setting up a font family as a substitute for another one in a specified font encoding. >It has been obsoleted by the NFSS command \DeclareFontFamily

Re: Release major version number change causing upgrade problems

Hi guys, FYI If the 2.x version of the package is installed, it will not be automatically replaced by version 0.x, even if 0.x is newer and 2.x is older. The APT package manager adheres to the semantic versioning scheme to identify the newer version. Best Regards, Andrey > On 27 Mar 2024, at

Re: [Cin] Youtube

Hurray! Best regards, Andrey вс, 10 мар. 2024 г., 00:53 Andrea paz via Cin : > A quick note to say that CinGG's Youtube channel has reached 500 > subscribers. > -- > Cin mailing list > Cin@lists.cinelerra-gg.org > https://lists.cinelerra-gg.org/mailman/listinfo/cin > -- Cin mailing list Cin@lis

[Scikit-learn-commits] Re: [scikit-learn/scikit-learn] 63e5ae: TST Use same random seeds for both GaussianMixture...

Good afternoon, I would like to share with you the latest news from monitoring online casinos with no deposit bonus for all gambling enthusiasts in the UK, https://www.casinoonlinecasinos.co.uk/no-deposit-bonus/ The platform's collection of no deposit bonuses is not just about playing games, it'

Re: [Cin] removing letter boxing while preserving aspect

You can use some ffmpeg filters directly in cinelerra. I think that cinelerra has ffmpeg's crop filter. Best regards, Andrey пн, 4 мар. 2024 г. в 10:59, Rob Prowel via Cin : > On 3/3/24 15:28, Terje J. Hanssen via Cin wrote: > > > > > You can possibly try a test on a file or clip copy using f

Re: [Cin] ot: intel_pstate

The cpupower utility can be used to set minimum and maximum cpu frequencies and frequency scaling governor. I use it on my intel and amd laptops. With some governor you can't set frequencies, try to change them. I hope this helps. Best regards, Andrey сб, 2 мар. 2024 г., 03:16 Andrew Randrianasu

GForth for Windows

Hi! Is it planned to develop a version of gforth for Windows? Following the link "Bleeding Edge snapshot" on https://gforth.org/ I see that the latest Windows version was released in 2020. Can we expect newer versions to appear? Sincerely, Andy.

RE: Ignite transactions

cache2.put|get — thread1 error when cache2.put tx.rollback exit log operation cache2.put tx.commit — thread1 and in case 2, it is necessary that a record of « log operation cache1.put» is remain Нестрогаев Андрей From: Zhenya Stanilovsky via user Sent: Wednesday, February 14, 2024 4:00 PM

RE: Ignite transactions

1. Perhaps in earlier versions I could use the atomic cache to record the protocol, but in the latest version, using the atomic cache inside a transaction leads to an error. Andyrey From: Нестрогаев Андрей Викторович Sent: Wednesday, February 14, 2024 12:35 PM To: user@ignite.apache.org

RE: Ignite transactions

(commit) or an error (rollback), I want the protocol of my actions to be preserved anyway. Based on your answers, I can assume that I can use either queues or a separate thread for these purposes. Нестрогаев Андрей From: Pavel Tupitsyn Sent: Wednesday, February 14, 2024 12:13 PM To: user

Ignite transactions

Hi All, Maybe someone has already researched these questions: 1. How can you organize nested/autonomous transactions in ignite? For example, for the purpose of writing a protocol to another cache, so that the protocol is saved regardless of the result of the main transaction. 2. If you use Messa

Re: [Cin] Adding soft subtitles to a DVD video

>Create and add Soft Subtitles as simple text info commentaries to the video content This is the topic for this post. Hello, Terje. You can try to use ML and machine learning approach to do this. Use whisper.cpp (https://github.com/ggerganov/whisper.cpp) program to generate srt file from your spee

RE: ignite + external database

Thanks Stephen, «Given a partition, it's not easy to say which records belong in it» Is there any recommended sequence of actions to restore the cluster after the loss of partitions? Should I reload the cache from the database on all nodes manually again? Нестрогаев Андрей From: St

RE: ignite + external database

Нестрогаев Андрей Викторович mailto:a.nestrog...@flexsoft.com>> wrote: 2. I understood, You are talking about placing the cache in a persistent data region and at the same time enabling the read-through, write-through caches mode. Thank you. This is, of course, a double penalty, but I’ll think ab

RE: ignite + external database

databases looks very unenterprise ready Andrey From: Нестрогаев Андрей Викторович Sent: Tuesday, February 6, 2024 10:03 PM To: user@ignite.apache.org Subject: RE: ignite + external database Thanks Stephen, 2. «You can, actually, enable persistence and connect to a third-party data store» - is this

RE: ignite + external database

here 5. You'd get "lost partitions." Restoring the missing data is up to you. Kind of by definition, Ignite has lost some data and it doesn't know what it's missing On Tue, 6 Feb 2024 at 16:09, Нестрогаев Андрей Викторович mailto:a.nestrog...@flexsoft.com>> wrot

ignite + external database

Hi All, I'm trying to use ignite (2.16) as an In-memory data grid (read-through / write-through caches), i.e. case described here https://ignite.apache.org/use-cases/in-memory-data-grid.html Several questions arose: 1. How is it recommended to store metadata for caches created dynamically durin

Bug#1061432: Add OrangePI PC Plus to sunxi platforms

not make it to the BTS for unknown reason, sorry for spam if both will arrive someday ;) - Original Message - From: "Vagrant Cascadian" To: "Андрей Лухнов" , 1061...@bugs.debian.org Sent: Wednesday, January 24, 2024 8:27:25 PM Subject: Re: Bug#1061432: Add Orang

Bug#1061432: Add OrangePI PC Plus to sunxi platforms

Source: u-boot Severity: minor Tags: patch Dear Maintainer, please consider adding OrangePI PC Plus to sunxi platforms. Changes are trivial, proposed platform is buildable without errors and tested bootable on target hardware. Required changes attached. Thank you, Andrey 0001-debian-targ

Bug#1061431: Do not act on packages for subarchs excluded by build profiles

Source: u-boot Severity: normal Tags: patch Dear Maintaner, I've noticed that while cross-building u-boot 2024.01+dfsg-1 for armhf on Debian Trixie amd64 with pkg.uboot.subarch.XXX or pkg.uboot.platform.YYY, empty .deb packages are created for subarchs that were not selected. I've improved deb

Bug#1061298: u-boot: refresh patches

:) I understand that patches still apply well, but they are already "not perfectly in place". So, it appears, the policy is to wait till they are not applicable with `--fuzz=0`. Understood. Thank you for the clarification! Andrey - Original Message - From: "Vagrant Cas

Bug#1061298: u-boot: refresh patches

Source: u-boot Severity: minor Tags: patch X-Debbugs-Cc: loukh...@lotes-tm.ru Dear Maintainer, I've quilt-refreshed patches in u-boot 2024.01+dfsg-1 to apply them without fuzzyness. Please find, ahem, a patch for that attached. :) (I'm not sure, if it is a correct method to propose a fix, t

Bug#1061057: clang-16 fails to install as build-dep during cross-build

Package: clang-16 Severity: normal Dear Maintainer, the problem initially was described in # 1060887 but postgres maintainer told me, it's a clang problem. So, here I am. The minimal reproducible example of debian/control follows: Source: cross-deps-problem Build-Depends: debhelper (>=

Bug#1060887: postgresql-server-dev-16 fails to install as build-dep during cross-build

Package: postgresql-server-dev-16 Severity: normal X-Debbugs-Cc: loukh...@lotes-tm.ru Dear Maintainer, I have postgresql-server-dev-16 as a build dependency in my package, minimal debian/control file to reproduce the problem is as follows: Source: cross-deps-problem Build-Depends: debhelp

Test count

Hello, i want to get test count finished run. How it do? Example teamcity: https://www.jetbrains.com/help/teamcity/statistic-charts.html#Test+Count for build duration i used run.getDuration() method -- You received this message because you are subscribed to the Google Groups "Jenkins Developers

Jenkins Jelly JS plugin reload

Hello, i have problem, no working select error 403 forbidden. I want change select element and update my chart information (invoke java method). https://github.com/andrei300399/buildConfigurationStatistics my repository How it do -- You received this message because you are subscribed to the Goo

Jenkins - Java - Jelly - javascript

Why error 403? Attempt invoke java from jelly var foo = foo.add(1,5, function(t) { document.getElementById('msg').innerHTML = t.responseObject(); }) package io.jenkins.plugins.sample; import hudson.model.Action; import hudson.model.Job; import jenkins.security.stap

Re: [Cin] Limit number of opencv modules we build

It's no problem to me to rebuild a packages, even If there no code change. Feel free to add anything you want to git repo. вс, 10 дек. 2023 г., 21:27 Phyllis Smith : > >> Will the Andrew's patch be included in the git tree? >> > Yes. I have been hesitant to check into GIT, changes that are real

Re: [Cin] Limit number of opencv modules we build

Phyllis, Will the Andrew's patch be included in the git tree? Best regards, Andrey ср, 6 дек. 2023 г., 02:53 Phyllis Smith via Cin : > Also tested here on the 2020308 tarball and used the 6 plugins with > expected results. Although I did not time it, most likely it built faster > which is ben

Re: [Cin] Cinelerra-GG packages build farm

OpenCV plugins added to rpm packages. Thanks to Andrew. Best regards, Andrey пн, 4 дек. 2023 г. в 10:53, Андрей Спицын : > OpenCV plugins added to deb packages. > > Best regards, > Andrey > > сб, 2 дек. 2023 г., 21:02 Phyllis Smith : > >> I have some experience with

Re: [Cin] our opencv archive errors out on gcc 13 distros

Andrew, thank you! Fedora 38 package builds ok now. Best regards, Andrey вт, 5 дек. 2023 г. в 13:17, Andrew Randrianasulu via Cin < cin@lists.cinelerra-gg.org>: > so, I tried to fix it in brutal way > > download and unpack opencv 4.8.1 from their sf page. > 98 mb or so > cd into it > > cd opencv

Re: [Cin] Cinelerra-GG packages build farm

OpenCV plugins added to deb packages. Best regards, Andrey сб, 2 дек. 2023 г., 21:02 Phyllis Smith : > I have some experience with rpm-based systems. Why does dnf select the >> i686 architecture in the first place? On Debian based systems, apt selects >> the original architecture of the system b

Re: [Cin] Cinelerra-GG packages build farm

; ... >>> Installed: >>> suil-0.10.18-1.fc38.i686 >>> ... >>> # rpm -i cinelerra-5.1-20231201.fc38.x86_64.rpm >>> error: Failed dependencies: >>> libsuil-0.so.0()(64bit) is needed by cinelerra-5.1-20231201.x86_64 >>> >>> I wi

Bug#1057145: debootstrap: Sync hangs

Package: debootstrap Version: 1.0.123+deb11u1 Severity: normal Tags: upstream   In case of using LDAP, mounting flash drives and so on, a hang may occur. Using forward sync in debootstrap is not correctly. Please, modify command to or similar to prevent waiting overhead.   There is 816...@bugs.d

Bug#1057145: debootstrap: Sync hangs

Package: debootstrap Version: 1.0.123+deb11u1 Severity: normal Tags: upstream   In case of using LDAP, mounting flash drives and so on, a hang may occur. Using forward sync in debootstrap is not correctly. Please, modify command to or similar to prevent waiting overhead.   There is 816...@bugs.d

JMS API with client acknowledgement issue

Hi Team, I am currently using "artemis-jakarta-client" 2.31.2 version I've stumbled into an issue with client acknowledge mode when using JMS API. Here's an example: try (var factory = new ActiveMQConnectionFactory("", "", JMSContext.CLIENT_ACKNOWLEDGE)) { var destinatio

Re: [Cin] Cinelerra-GG packages build farm

> https://cinelerra-gg.org/download/images/?C=M;O=D > > CinGG-20230930-x86_64.AppImage > > > > Rgds, > Terje J. H > > > > > Den 26.11.2023 10:53, skrev Андрей Спицын: > > Fresh packages with latest git changes are available. > > > Best regards

Re: [Cin] Cinelerra-GG packages build farm

Fresh packages with latest git changes are available. Best regards, Andrey чт, 23 нояб. 2023 г., 15:04 Terje J. Hanssen via Cin < cin@lists.cinelerra-gg.org>: > > > Den 20.11.2023 12:33, skrev Terje J. Hanssen: > > ...snip > > >>> > >>> Ok, I reinstalled Tumbleweed to SlowRoll and added

Re: [Cin] Cinelerra-GG packages build farm

, Andrey чт, 16 нояб. 2023 г. в 02:12, Rob Prowel : > On 10/8/23 07:14, Андрей Спицын via Cin wrote: > > Hello Phyllis and everyone, > > > > I've created a build farm for cinelerra deb and rpm packages. Although it > > is at an early stage of development, it can build pac

Re: [Cin] Rendering, encoding and decoding with Nvidia

Hi, David You can try one of prebuild packages at https://github.com/einhander/cin-gg-packages/releases Maybe they would work for you. Regards, Andrey вт, 14 нояб. 2023 г., 11:08 David Koski via Cin : > I've started using CinGG-20230930-x86_64.AppImage and I'm getting the > hang of the basics.

Re: [Cin] Cinelerra-GG packages build farm

ra10bit-5.1-20201031.x86_64 (@System) > > File conflicts happen when two packages attempt to install files with > the same name but different contents. If you continue, conflicting files > will be replaced losing the previous content. > Continue? [yes/no] (no): y > > (1/2) Installing: libsuil-0-0-0.10.18-lp155.32.12.x86_64 > > ...

Re: [Cin] Cinelerra-GG packages build farm

Suse Leap 15.5, Fedora 38 and Ubuntu 22.04 packages are ready at https://github.com/einhander/cin-gg-packages/releases Best regards, Andrey вт, 10 окт. 2023 г., 05:34 Terje J. Hanssen : > I.e by shortening and simplifying the previous Cin-GG package list to the > newest (current) release of each

Re: [Slackbuilds-users] MPD needs an update

26 > > On 27/10/2023 19:01, Андрей Рабусов wrote: > > Hi all, > > > > I think the mpd's slackbuild (and the corresponding info file) needs to > be > > updated to match the latest mpd version, 0.23.14, due to the libfmt > > update to version 10. I didn't

[Slackbuilds-users] MPD needs an update

Hi all, I think the mpd's slackbuild (and the corresponding info file) needs to be updated to match the latest mpd version, 0.23.14, due to the libfmt update to version 10. I didn't get a reply from the maintainer, so hopefully somebody else could quickly fix it. The build error with the current

[Cin] Cinelerra-GG packages build farm

Hello Phyllis and everyone, I've created a build farm for cinelerra deb and rpm packages. Although it is at an early stage of development, it can build packages on every git change in the main repo. Feel free to use these packages at https://github.com/einhander/cin-gg-packages/releases. Note that

Re: [Cin] Varied Standard Shortcuts AppImage version for testing

Hello Andrea and Phyllis! I see only one difference from other tables - all tables start with "\begin{longtable}[h]{>{\bfseries}p{...". The last two tables use "\begin{longtable}[h] { | p{...". There is nothing wrong from the latex side. Except the [h] is useless with longtables. It's better to as

[ark] [Bug 475012] New: Сбой программы Ark при попытке открыть файл из архива.

https://bugs.kde.org/show_bug.cgi?id=475012 Bug ID: 475012 Summary: Сбой программы Ark при попытке открыть файл из архива. Classification: Applications Product: ark Version: 23.04.3 Platform: unspecified OS: Linux

Re[2]: Add supermicro PowerSupply to freeipmi please

mbus-power-supply-status failed: Invalid data field in Request Does not work. > Al > > On 9/4/23 21:46, Андрей Грехов wrote: > > Hi. > > Понедельник, 4 сентября 2023, 22:27 +07:00 от "Al Chu" : > >> Hi, > >> > >> I believe this is

Re[2]: Add supermicro PowerSupply to freeipmi please

addresses. ipmitool -H $host -U $user -P $pass raw 0x06 0x52 0x05 0x$address 0x01 0x$d3 $address = 70|72|74 PWS-720-R $d3 : 0xA Temp, C 0xB Fan1, RPM=$izm*114,5 0xС Fan2, RPM *114,5 -- There is no desire to add support for reading modern power supplies over the PMBus (rev 1.0,1

I want to contribute to Apache Ignite

Hello everyone! My name is Andrei Khitrin. I want to contribute to Ignite. I've already filled several issues, and now am ready to send small patches. My ASF JIRA username is akhitrin. -- Andrei Khitrin

General bar element implementation

Hello, getfem-users. I would like to implement a 1D element in 3D, which can be cosider all force factors N, Qy, Qz, Mx, My, Mz. I use C++ interface. For the first i have tried to translate this example https://github.com/getfem-doc/getfem/blob/master/interface/tests/python/demo_truss.py to C++, bu

Re: Missing columns in SYSTEM.LOG after upgrading to 5.1.3

> If you can afford to lose the data in SYSTEM.LOG, then the easiest fix > is to drop SYSTEM.LOG. > Phoenix will re-create it with the correct columns on the next > connection. Thanks for advice! May be we will choose this way. > Please file a JIRA with this information. Ok! -

Re: [Slackbuilds-users] Happy 30 years Slackware !

The oldest still-around distro, I would say. Happy 30th birthday Slackware! On Mon, Jul 17, 2023, 17:48 Luna Jernberg wrote: > Happy late 30 years to Slackware > > the oldest Linux distro still around :) > > thanks volkerding for all the work > > Den mån 17 juli 2023 kl 11:59 skrev Arnaud via S

Add blocksize properties to libvirt

Hello! I want to make patch for exposing min_io_size and opt_io_size properties toexport block topology information to the guest. This is needed to set optimali/o alignment for storages in underlay. This option already exists in qemu but haven't been implemented yet in libvirt. It is assumed if you

Jira (PUP-11857) Notify resource, unexpected behavior

Title: Message Title Андрей Владимирович

[Geoserver-users] Unsubscribing from geoserver mailing list

Good afternoon! Tell me how can I unsubscribe from geoserver, how to remove myself from Geoserver-users@lists.sourceforge.net -- С уважением, Метелкин Андрей ___ Geoserver-users mailing list Please make sure you read the following two resources before

[Geoserver-users] (no subject)

Unsubscribing from geoserver mailing list Good afternoon Tell me how can I unsubscribe from geoserver, how to remove myself from Geoserver-users@lists.sourceforge.net -- С уважением, Метелкин Андрей ___ Geoserver-users mailing list Please make sure

[ovirt-users] Re: Error when deploy Ovirt4.4 Hosted Engine

Hello, I see: ip -j rule | jq '' [ { "priority": 0, "src": "all", "table": "local" }, { "priority": 100, "src": "10.55.8.0", "srclen": 24, "table": "500" }, { "priority": 101, "src": "192.168.222.1", "srclen": 24, "table": "main" }, { "p

Re: [Cin] Interesting confusion on X screens vs displays

>also, 3 or more displays will not work? I used Cinelerra with 5 displays and it's works ok. I didn't try Cinelerra with second xserver. Best regards, Andrey вс, 8 янв. 2023 г., 07:41 Andrew Randrianasulu via Cin < cin@lists.cinelerra-gg.org>: > I tried to test multi-monitor support by firing a

Re: [Cin] Video stibilization

Gyroflow has a tar archive of static build. I also have crashes with appimage. To launch static build, I have to install libc-dev package 🤦. There is a solved issue in GitHub about appimage crash. Best regards, Andrey чт, 1 дек. 2022 г., 21:53 Andrea paz via Cin : > Yes, I have tried both packa

Re: [Cin] Video stibilization

> > https://github.com/gyroflow/gyroflow This one has a cli interface and an appimage version. Theoretically possible that cin can create a project file for gyroflow, render it and import back. Best regards, Andrey чт, 1 дек. 2022 г. в 17:38, Andrew Randrianasulu via Cin < cin@lists.cinelerra-g

[Cin] [Offtop] Neural networks image upscale for cinelerra

Hi, Neural network assistant image upscaling has been a trending feature for a few years. I've found an interesting pre-built executable here: https://github.com/xinntao/Real-ESRGAN#portable-executable-files-ncnn (no python needed). I wonder, if cinelerra can use external filters like that to ups

[Freesurfer] [Freesetfer] Requesting Password for VM soft

External Email - Use CautionHello! Could I request for password to unzip ova.7z file: FS_7_2_0_ubuntu_18_04_06.ova Thanks,Andrei___ Freesurfer mailing list Freesurfer@nmr.mgh.harvard.edu https://mail.nmr.mgh.harvard.edu/mailman/listinfo/fr

Re: [Cin] Suddenly Cinelerra keeps crashing

Did you try to reboot your computer? What type of WM or DE do you use? Best regards, Andrey пн, 7 нояб. 2022 г. в 21:20, Evaessen@ziggo Nl via Cin < cin@lists.cinelerra-gg.org>: > I have been working with Cinelerra a few hours today. > I edited two projects, viewed the result by playing and sav

Re: [Cin] HW accel seems broken to me on AMD laptop

I've done some research on the hardware acceleration problem with appimage. Non-working hardware acceleration is a drawback of portability. There is no general solution available. I've found that I can preload system libraries ahead of bundled with appimage with LD_LIBRARY_PATH=/usr/lib/x86_64-linu

[Cin] HW accel seems broken to me on AMD laptop

HI, I try to set up hw accel decoding for AMD laptop, but if I enable vaapi or vdpau I see a 'file not found' error. Hw accel works OK for the rest of the software. I unpacked appimage and removed boundled libvdpau.so, this results in working hwaccel via vdpau. The same with if I start cinelerra w

Re: [Cin] some cleanups, adding ffmpeg script from mail archive

Hi Phyllis, Andrew My script was just a proof of concept, can cinelerra use external tools for proxy file creation or not. The answer is Yes. > how does Cinelerra work with this proxy file and switch back and forth to the "real" file As I remember, the user must create a proxy file with external s

[grpc-io] Re: "No such file or directory" with running on arm windows

new path. It is works good. >> >> And IIs express not workin on arm windows. I should use iis. >> >> четверг, 6 октября 2022 г. в 10:39:29 UTC+3, Андрей Соколов: >> >>> Yes, sure, thank you for answer. >>> [image: Без названия 4.png][image: Без назва

[grpc-io] Re: "No such file or directory" with running on arm windows

i resolved this. \\Mac\Home\Desktop\work - my project path. It is not working on windows. C:\work - new path. It is works good. And IIs express not workin on arm windows. I should use iis. четверг, 6 октября 2022 г. в 10:39:29 UTC+3, Андрей Соколов: > Yes, sure, thank you for ans

  1   2   3   4   5   6   7   8   9   10   >