d called it good for
> the night. After re-enabling it and reloading SIP this morning they
> successfully re-registered.
>
> Is there some sort of TTL, cache, saved salt value, or other time/session
> related tidbit saved that is expiring here?
>
> - Chris
>
>
> O
SIP this morning they successfully
re-registered.
Is there some sort of TTL, cache, saved salt value, or other time/session
related tidbit saved that is expiring here?
- Chris
On Jun 17, 2010, at 10:21 AM, Chris Brentano wrote:
> Hi all,
>
> I tried searching, so if this has alr
Hi all,
I tried searching, so if this has already been discussed please point me in the
right direction.
On separate occasions I've seen cases where Asterisk boxes will be unable to
register with each other via SIP or IAX2 when a Firewall is replaced. I'll
describe two different cases. In both
FYI, in case anyone else encouters this issue. The card that I had
which I could reproduce this with was hardware revision B4. I RMAed
the card with Digium support and got a newer, revision C card, and the
issue is no more.
On 20 Oct, 2009, at 3:25 PM, Chris Brentano wrote:
> I'
I've seen this consistently on three systems, with three different
cards, and multiple versions of DAHDI. At first I thought the issue
only occurred on newer, Nehalem-based, systems, but I reproduced it on
a Core 2 Duo box as well. I've tested with dahdi-linux 2.2.0.2, dadhi-
linux-complete
Correction, I did notice it for download at
http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-addons-1.6.1.1.tar.gz
- Chris
On 16 Oct, 2009, at 4:06 PM, Chris Brentano wrote:
> I noticed that asterisk.org got a redesign, quite recently it seems,
> which is very nice, but the
Just putting this out there to see if anyone else has seen any issues.
May cross-post to asterisk-dev if it's indeed a bug (and not my own
stupidity).
I've got a Digium TE220 (2xT1 interface w/Echo canceller) that in two
separate Nehalem-based (Xeon E5520 "Gainestown") boxes (HP ProLiant
M
I noticed that asterisk.org got a redesign, quite recently it seems,
which is very nice, but the addons package isn't listed for download
any longer, nor are releases posted to
http://downloads.asterisk.org/pub/telephony/
.
That said, looks like it's still available in svn,
http://svnview.d
Use ExtenSpy for spying on a specific extension.
http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+ExtenSpy
On 9 Oct, 2009, at 10:44 AM, Torintino T wrote:
How can i activate "ChanSpy" to spy on a dedicated extension?
I see the following in "/etc/asterisk/extensions_additional.conf"
using
an ACL or iptables rule, but that can quickly becoming a losing
strategy if the attacker has access to different systems or different
networks.
Good luck!
- Chris
---
Chris Brentano
IT Engineer
Jive Software
915 SW Stark St, Suite 400
Portland, Oregon 97205
Email/XMPP: c
Perfect! Thanks Brett.
On 10/7/08 4:46 PM, "Brett Porter" <[EMAIL PROTECTED]> wrote:
http://archiva.apache.org/docs/1.1.3/adminguide/customising-security.html
The property to change is application.url
Cheers,
Brett
2008/10/8 Chris Brentano <[EMAIL PROTECTED]>:
> 1.1.
1.1.2 Standalone.
On 10/7/08 4:19 PM, "James William Dumay" <[EMAIL PROTECTED]> wrote:
Hey Chris,
That sounds like a bug to me... what version of Archiva are you using?
Thanks
James
On Tue, 2008-10-07 at 17:52 +, Chris Brentano wrote:
> I've been digging around th
I've been digging around the application files, but can't find this. Maybe it's
an easy answer.
I'm reverse-proxying Archiva through httpd, so requests for /archiva on my
server on port 80 are proxied to port 8080 where the application is running
(Archiva standalone). When someone requests a pa
10:20 AM, Chris Brentano wrote:
> I would also disagree that the written exam is biased towards people
> who attended the training. I attended a Bootcamp earlier this year and
> thought I was fully prepared to pass the dCAP. Especially since I
> already had real-world Asterisk experie
I would also disagree that the written exam is biased towards people
who attended the training. I attended a Bootcamp earlier this year and
thought I was fully prepared to pass the dCAP. Especially since I
already had real-world Asterisk experience. But the written exam
covered material tha
I don't really see the advantage to be honest. If I needed Asterisk access from anywhere I'd just run it locally on my laptop, connect to an ITSP via IAX or SIP, and run a softphone app locally. The only exception I can think of is when you'd want people to be able to leave voicemail on your system
I hope you have a spare card for things like this! :)
If you do, I'd suggest building another Asterisk box (given you also
have a spare PC for such), copy over the configs, and install the
spare card. After hours, or whenever it may be appropriate, schedule
some downtime and test the new sys
#1.) It should just appear as unpartitioned space to the OS. You can
then partition it and add that partition to one of your LVs, and then
use the LVM and ext filesystem tools to grow your existing LV and then
resize the filesystem to fit.
Good articles on LVM:
- http://kbase.redhat.com/faq
Off the top of my head... you could probably route the audio of a
softphone (like Zoiper/X-Lite) to something like Nicecast (Mac) or
Icecast.
On 11 Aug, 2008, at 9:21 AM, Andrew Niemantsverdriet wrote:
> Hi all,
>
> I have an interesting problem that I am looking for a solution for. I
> want
I'm getting somewhere, but I think I may be missing a piece of
configuration or doing something incorrect.
My $archiva_home/conf/security.properties file looks like this:
user.manager.impl=ldap
ldap.bind.authenticator.enabled=true
redback.default.admin=admin
redback.default.guest=guest
security
I have two Asterisk 1.4 boxes connected via IAX over a VPN tunnel on a
10Mbit link. We never did any stress testing as it's a temporary
arrangement, but we've never had any call quality issues or run up
against concurrent call limitations. I'm mostly routing internal
extensions over the tru
Hmm, it should be there no matter what, even if you deselect all the
package groups on install. Should be at /usr/bin/yum.
On 5 Aug, 2008, at 10:01 AM, Mohsen Pahlevanzadeh wrote:
Dear All,
When i install CentOS, it doesn't install yum package.
How i do it?
when i haven't yum, it is like tha
paste the
config specifed in the security.properties section)
And you might also need to add the LDAP specific configuration
specified in
the LDAP Settings section in this document:
http://redback.codehaus.org/configuration.html
HTH,
Deng
On Tue, Aug 5, 2008 at 8:16 AM, Chris Brentano <
[
Hi all,
I'd like to configure Archiva to do LDAP authentication to Active
Directory. It appears that Redback has LDAP support, and I've seen
some various bits here and there about configuring the
security.properties or application.xml file to utilize LDAP, but I
can't find a concise guide
I think TrueCrypt (www.truecrypt.org) will do this.
On 4 Aug, 2008, at 8:51 AM, Plant, Dean wrote:
Has there been any updates to support encrypting the whole disk in
5.2?
If not, Is anyone doing this and can point me to some good
documentation?
Thanks
Dean
I would second OpenLDAP, having used it in production at two different
employers. It's always been stable and reliable. If you're restarting
slapd every 15 minutes I'd take a good hard look at the problem versus
just migrating away from it.
On that note, we recently migrated to Active Direc
If they're both the same output (i.e. not individual outputs, but just
different media options) then I'd say yes. But if they are distinct
outputs (say for a multi-monitor setup) then one may be display #1 and
the other #2. If it's integrated video on your motherboard there may
be options i
Generally I'd agree. But it could at least more adequately notify the
user, even if they are compiling on a different system than where it
will be running on. It just seems that in most cases people will be
compiling on the system they will be installing on. This is what they
teach at the Aster
-0700, Chris Brentano wrote:
Nevermind, I found the problem.
And for the benefit of the readers of the archives: what was it?
Fair money on the prospect that he failed to put /usr/local/lib in
/etc/ld.so.conf and run ldconfig.
I'll take your bet:
| This is on C
I believe this isn't a Polycom thing, but the nature of SIP devices in
general. But, that said, Polycom should start making IAX desk phones. :-)
- Chris
Lee, John (Sydney) wrote:
DND does not do anything for me BLF-wise either (shame). Simply
picking up
the handset won't do, at that
I just did a export PKG_CONFIG_PATH=/usr/lib/pkgconfig and reran
./configure and it was happy again.
- Chris
Tzafrir Cohen wrote:
On Sat, Apr 19, 2008 at 11:11:53AM -0700, Chris Brentano wrote:
Nevermind, I found the problem.
And for the benefit of the readers of the a
Nevermind, I found the problem.
Chris Brentano wrote:
Asterisk 1.4.19, Zaptel 1.4.10 and libpri 1.4.3. When I try to start
up Asterisk (with -cvvv) I get an error regarding func_curl.so
(lines omitted)
...
== Registered custom function STRFTIME
== Registered custom function STRPTIME
Asterisk 1.4.19, Zaptel 1.4.10 and libpri 1.4.3. When I try to start up
Asterisk (with -cvvv) I get an error regarding func_curl.so
(lines omitted)
...
== Registered custom function STRFTIME
== Registered custom function STRPTIME
== Registered custom function EVAL
== Registered custom functi
Additionally Mark, a Channelized (also called Integrated) T1 offers 24
channels for voice/data, but after bit robbing (for signalling, etc) you
only get around 56kbps per channel. ISDN PRI over T1 has 23 b-channels
of voice/data and one d-channel for signalling, etc. PRI is preferred
and most c
I'll third the Polycom units. We use SoundStation IP 4000s in our
conference rooms and they work great. But yes, they are expensive.
- Chris
On 24 Dec, 2007, at 7:20 AM, Michael Graves wrote:
> On Mon, 24 Dec 2007 14:29:46 -, Chris Bagnall wrote:
>
>> Greetings list,
>>
>> Does anyone hav
Hmm, I'm never encountered this myself. Could it be BIOS power
management settings?
- Chris
On 24 Dec, 2007, at 8:58 AM, Jeffrey Ross wrote:
I'm in the process of setting up a new system and I have found that
the system is hibernating when its sitting idle for a long period of
time.
Ho
36 matches
Mail list logo
