Philipp von Klitzing schrieb:
Hi!
I have an installation utilizing * with an AVM C4 (ISDN card). Using
softphones (SIP and IAX) I have sound problems, like echo.
Did you test if a good soundcard and especially a really good headset
make a difference?
I've done tests with a Labtec headset on
Hello Matteo,
I use ISDN with AVM C2, also fritz pci with tdm fxs sip phone without
any echo.
what isdn channel driver are you using?
I suggest using the avm with capi+chan_capi-0.3.0 and turn
on echosquelch in capi.conf
That is my configuration (0.3.0, echosquelch=1 in the general section
Dan,
A first basic version of DIAX as an ActiveX can be downloaded from:
http://www.laser.com/dante/diax/activediax.zip
[..]
P.S. Unfortunatelly it works only on IBM PC compatible computers (not Mac's
or Pocket PCs)
is there a technical reason for not supplying a version running under
the other
Oliver Schmidt
the internet company
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
Dan schrieb:
Hi,
- Original Message -
From: Steven Critchfield [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, December 11, 2003 12:10 PM
Subject: Re: [Asterisk-Users] * CVS checkout does not work on one
box -solved now
..
It doesn't have to do with the directory, just the
it right now. This is not a
priority for me.
you can't run DIAX in TS mode, as under the Win2k Terminal Server
normally there is no sound card available.
http://www.winnetmag.com/Article/ArticleID/7493/7493.html
--
Best regards
Peer Oliver Schmidt
the internet company
a manufacturer. I will
need quite a few phones next year for at least two installation.
--
Best regards
Peer Oliver Schmidt
the internet company
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
.
Either AVM or EICON. I have /heard/ the EICON cards are preferable
because of the on board echo cancellation
--
Best regards
Peer Oliver Schmidt
the internet company
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo
Hello,
today I tried a DIAX - * - DIAX connection over the internet (768/128
ADSL connection on both sides).
The sound quality was great. However, we had some latency problems, and
also, if both sides where not talking the first words had some problems
getting thru.
Is this expected, is there
Michael,
I have the same problem with running iaxcomm. Did the following:
* Extract to c:\cd
* Open command prompt
* c:
* cd \cd
* iaxcomm
What happens:
A cursor change for a couple of seconds from an arrow to an arrow with a
clock. iaxcomm never shows up.
BUT, iaxcomm makes the computer nearly
not very satisfied by the sound
quality.
--
Best regards
Peer Oliver Schmidt
the internet company
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
to add more
lines...
you might want to re-read the results:
1000 queries = 2.302s
For me this looks like 2ms per query.
Maybe WipeOut can confirm the information (one way or another)
--
Best regards
Peer Oliver Schmidt
the internet company
___
Asterisk-Users
Hi,
and need 'callto:' support :-)
Why you need this?
[..]
callto: support is needed if you want to imbed an HREF link in a webpage
to automatically call someone over a (soft)phone. It is an URI, just
like mailto:, http:, ftp:.
What does this mean for DIAX?
DIAX should be able to be called from
command line phone, you can use the one from Steve's iaxclient
project on Sourceforge.
You do not need a full featured phone for that..
True, but to complement the features already found in DIAX the
eforementioned request sounds feasible.
--
Best regards
Peer Oliver Schmidt
the internet company
browser.
--
Best regards
Peer Oliver Schmidt
the internet company
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
or maybe to a colleague
callto:[EMAIL PROTECTED]
--
Best regards
Peer Oliver Schmidt
the internet company
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
Anyone got any pointers on where to find USB handsets or headsets that
can be used as the audio device on a softphone?
Have look at http://www.voipvoice.com. A UK company offering
a) USB handset with on/off hook
b) USB handset with dialing pad.
They have an API for Windows, which is needed to
Hello Olle,
Olle, I can't reach the faq page, and haven't been able to for the
last four days.
I'm getting 504 gateway timeout errors.
Gateway timeout indicates something with your web proxy ...or?
I've been able to reach the Wiki all weekend, I've updated and created
several pages...
I also now
Hi Dan,
Another problem I am seeing is I cannot delete any
phone book entrys.
This is very strange...
Someone else with this issue?
I cannot reproduce it here
Just tried to delete Entry 12. Same problem here. And afterwards I can't
start DIAX anymore, except by manually editing diax.cfg and
. There are rough edges, but the start looks promising.
--
Best regards
Peer Oliver Schmidt
the internet company
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
Christopher Stephens schrieb:
Is there SIP client which work with Asterisk and can be embedded in a
HTML page ?
It may not be *exactly* what you're looking for, but try:
http://fwd.pulver.com/callme.php?userid=411
[..]
Unfortunately this seem to work with Internet Explorer, only.
rgds
pos
After
apt-get update apt-get upgrade -y
wget http://www.junghanns.net/asterisk/downloads/chan_capi.0.2.5c.tar.gz
tar xfvz chan_capi.02.5c.tar.gz
cd chan_capi-0.2.5c
make make install
shutdown -r now
asterisk seg faults upon calling in via ISDN.
Any ideas are greatly appreciated.
rgds
pos
Peer Oliver schmidt wrote:
After
apt-get update apt-get upgrade -y
wget http://www.junghanns.net/asterisk/downloads/chan_capi.0.2.5c.tar.gz
tar xfvz chan_capi.02.5c.tar.gz
cd chan_capi-0.2.5c
make make install
shutdown -r now
asterisk seg faults upon calling in via ISDN.
After another
apt-get
Roy Sigurd Karlsbakk wrote:
After another
apt-get install asterisk-dev
another make cycle for chan_capi
apt-get install asterisk
...
Selecting previously deselected package asterisk.
(Reading database ... 41473 files and directories currently installed.)
Unpacking asterisk (from
Jeff Jansen wrote:
On Sunday 05 October 2003 00:29, Roland Jungwirth wrote:
Is there any possibility that every user can see every outgoing
mail in her/his sent-mail-folder? and how can i get this set-up running,
so that the user can choose what pop-account she/he is going to use to send
the
Josh,
I downlaoded it and tried it, SIPPS. Nice featureful sip client, however, I
haven't been able to get it to pass dtmf to *.
I have played with SIPPS as well. DTMF worked for me, but only when
using the mouse to click on the keys of the virtual keypad :(
Reported it back to Ahead.
I don't
Hi Tilghman,
I am trying to use the Windows iax client.
My iax.conf looks like this:
-snip-
[pos|
^
I'm hoping this is a typo in the email. If it isn't, that might
explain everything.
Thanks eagle eye. That was the error.
Thanks again.
rgds
pos
Hi,
in a HTML page I can write href=mailto:[EMAIL PROTECTED] and clicking on the
link will open the default mail application.
Is anything like that possible with any of the soft phones (SIP or IAX
[Windows])?
Any and all information is greatly appreciated.
rgds
pos
Hi,
got the latest snapshot. I still can't see my shared folders in the list
of folders within the message filter screen.
Are there any plans to change this?
TIA
rgds
pos
---
This SF.Net email sponsored by: Free pre-built ASP.NET sites
Dan wrote:
add in the [pos] section :
username=pos
and then if it still doesn't work try to comment the lines:
;deny=0.0.0.0/0.0.0.0
;permit=10.1.3.0/255.255.255.0
;defaultip=10.1.3.2
Did all that, even restarted asterisk (instead of reload via CLI), still
no go. Any other idea?
rgds
pos
I am
Good morning,
I am trying to use the Windows iax client.
My iax.conf looks like this:
[general]
port=5036
bindaddr=10.1.3.111
bandwidth=high
allow=gsm ; Always allow GSM, it's cool :)
tos=lowdelay
[pos|
type=friend
context=default
auth=plaintext
secret=pos
Hi,
we are a small office and would like * to answer the phone after 5
seconds and play a greeting. In parallel a phone should continue to
ring. When the phone gets picked up, the call should be transfered.
Is this possible?
Any ideas/pointers are greatly appreciated.
rgds
pos
Mark,
thank you for your information.
I am in the process of recording voicemail prompts in german. How do I
specify the language for the voice mail messages? I want to offer both
language files, based on the calling party.
Use setlanguage. Then organize the language files by directory e.g.
Hi Andreas,
I have asterisk behind my primary PBX connected via ISDN (chan_capi).
Calling out and calling in works just fine, however I can't connect to
my primary pbxs' extensions.
at my site it is working exactly as you wrote in your 1st example. How is
your PBX setup? I remember that there is
Reini Urban wrote:
Mark Spencer wrote:
Use setlanguage. Then organize the language files by directory e.g.
/var/lib/asterisk/sounds/de
/var/lib/asterisk/sounds/digits/de
Also, say.c will have to be modified to support German style number
handling.
Mark
On Sun, 27 Jul 2003, Peer Oliver schmidt
Peer Oliver schmidt wrote:
Hi Andreas,
I have asterisk behind my primary PBX connected via ISDN (chan_capi).
Calling out and calling in works just fine, however I can't connect to
my primary pbxs' extensions.
at my site it is working exactly as you wrote in your 1st example. How is
your PBX
Armand A. Verstappen wrote:
On Mon, 2003-07-28 at 08:36, Peer Oliver schmidt wrote:
Ok, the first three things I did. Unfortunately, I am no c coder. But
the logic to say german numbers is identical to the english logic, ie.
21 = twenty one
11 = eleven
210 = two hundred ten ('and' between
Hi,
I have asterisk behind my primary PBX connected via ISDN (chan_capi).
Calling out and calling in works just fine, however I can't connect to
my primary pbxs' extensions.
If anyone has an example extensions.conf, I'd be grateful for a copy.
I tried (the MSN of the ISDN card is set to 30)
Hi,
I am in the process of recording voicemail prompts in german. How do I
specify the language for the voice mail messages? I want to offer both
language files, based on the calling party.
Any and all help is greatly appreciated.
rgds
pos
___
Good day,
for all german speakers out there, go to your nearest newsstand and grab
the latest release of the c't.
There is an article (c't 2003/16 Page 194ff) about using and configuring
courier as an IMAP server. It describes how to configure Sendmail and
Postfix to deliver the messages, how
Holger,
Therefor I have a PC with an AVM-A1 ISDN4Linux hardware and inside the
network a cisco 7960 Ip Phone (SIP) and two TIPTEL innovaphone 200 (H.323)
and some softpgones like kphone, netmeeting, ...
[..]
Does anyone have such a configuration in use and can send me the
configs? This would be
Is there a Debian package available for asterisk-oh323, or the chan_h323?
If yes, where might I find one?
Thanks
rgds
pos
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
Good day,
anyone had success finding a SIP or H.323 phone with intercom
capabilities? Softphone would be preferred?
TIA
rgds
pos
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
Hi,
I want to utilize the above card to achieve the following
* Attach two ISDN connections (4 channels) to the outside world
* Have two internal ISDN connections (4 channels) to the inside
* Have multiple SIP phones connected
Anyone out there having success in utilizing the C4s ISDN ports to
Peter Zeltins wrote:
Calling * via SIP produces very good sound. Calling * via the chan_capi
produces horrible sound. However, if I dial 500 in the demo menu to
connect to the IAX at digium the sound is good again. ie:
ISDNCall-AVM-B1-Card-Asterisk = All prompts sound horrible
SIP-Asterisk =
Good day,
*newbie alert*
I try to run * with capi_chan (and later on SIP).
System: Debian 3.0 / apt-getted most stuff except chan_capi and b1.t4
HW: AVM B1 ISA / Celeron 400 / 128MB RAM
Starting * the following ends up in the messages
Jul 22 19:47:03 WARNING[16384]: File chan_mgcp.c, Line
Emanuele Pucciarelli wrote:
System: Debian 3.0 / apt-getted most stuff except chan_capi and b1.t4
Two hints.
1 (the stupid one). Are you running * as root?
2 (the less stupid one). Have you got all the kernel modules in place?
Yes to both. I found out the reason for my troubles after starting *
Hi,
after getting the chan_capi error messages sorted out, I have another
question.
Calling * via SIP produces very good sound. Calling * via the chan_capi
produces horrible sound. However, if I dial 500 in the demo menu to
connect to the IAX at digium the sound is good again. ie:
Good day,
I am running a fairly old installation of courier, and experiencing a
problem with SQwebmail.
I want to create a filter that forwards messages to a shared folder. But
none of my subscribed shared folders is visible in the dropdown box.
Is this implemented in the current version of
Bernard Robbins schrieb:
Does anybody know where I might start looking for a backup/archival
solution for my imap mail?
If you are using the whole courier suite, you might want to look at
ARCHIVEDIR within the courierd config file.
rgds
pos
Good day,
today, I tried to build RPMs for Redhat 7.2 with the following command:
rpmbuild -ta --define xflags --disable-root-check --without-authpam --without-authpwd --with-authpgsql --with-authldap --without-authmysql --without-authshadow --enable-softtimeout=4800 --without-tcpddns
Good day,
we are using the courierfax option. Unfortunately, most of the time the fax modem has to try more than once. Is there a way to configure courierfax to try, say 3 times, before giving up?
TIA
rgds
pos
---
This SF.net email is sponsored
Sam Varshavchik writes:
Is there a way to configure courierfax
to try, say 3 times, before giving up?
You can specify a suitale time interval in faxqueuetime. See courier(8).
Thanks Sam.
The information for faxqueuetime references queuetime. queuetime has a default of 1 week, if the file does
Sam,
I have not tried to setup any such aliases in my courier setups
Very similar to sendmail's: an alias file. There is infrastructure in
place to be able to resolve aliases via a database, however it's only
implemented for LDAP, now.
Does the now imply you are thinking about adding alias
Bill Hults writes:
When I try to access a user's e-mail via IMAP I see in maillog the user
able to login but not chdir to the users mail directory. The message is
IMAP:chdir: no such file or directory.
My users mail directories are in /var/qmail/maildirs/user/Maildir.
In authldaprc -
Hi,
the following makefile:
Makefile start ===
.PHONY: targ targA targB targC
targ: targA targB targC
targA targB targC:
@echo $@: T=$T
T := 1
targA: T = 2
targA: T += 3
targB: T := 2
targB: T += 3
targC: T = 2
Makefile end ===
gives
Good day,
quick question regarding message header format created by Webmail. I am using
SQWebmail as my reference implementation for RFC compliance.
SQWebmail creates a new message with the header fields limited by a LineFeed (0x0A).
Looking at RFC 822, I get the feeling it should be CR/LF
Sam Varshavchik writes:
Lines in text files on UNIX/POSIX systems are terminated by the NL
character.
The SMTP protocol has nothing to do with how text files look on
unix-derived systems.
sqwebmail submits the message, in standard UNIX/POSIX text format to the
local mail server, which is then
Jean-Rene Cormier writes:
I'm trying to compile Courier-IMAP and install it in a temp
directory somewhere else on the system so I can just pack it up and copy
it on another system. But if I use prefix=/temp/dir in the ./configure
when I install it on another system it looks for files installed
Alexander,
No, the scripts to do something like this aren't set up. You'll
[...]
-access=/etc/imapaccess.dat to TCPDOPTS in etc/imapd.
--
Sam
in addition to this, you might want to change IMP to ignore TLS. What I do in
another webmail package is connect from PHP to imap with the port set
Good day,
does anyone know of good way to modify the troff.source of the faxcover.tr? (Yes I
know you use an ascii editor ..:-))
I did manipulate already to some extent, but would like to do some more things. Any
good pointers for troff information on the net? Maybe some convert from
=LOGIN
but I still get
530 Authentication required
from the remote server
Any ideas what I am missing here.
Thanks and regards
Peer Oliver Schmidt
___
courier-users mailing list
[EMAIL PROTECTED]
Unsubscribe: https://lists.sourceforge.net/lists
hi,
Can anyone tell me howto let MS Outlook Express view and control
Courier sharefolders through IMAP?
I assume you have set the root folder path within Outlook Express to INBOX. ?
That will show all folders below INBOX., in essence your personal folders.
The hierarchy for the shared
Hi,
in the past couple of weeks it happens, that SQWebmail tells me there is an
unread message. Going into the folder does not show this message (at least
not at the beginning of the messages). Going into Outlook I can see (via
IMAP) the message clearly at the top of the list.
I am using
The problem is, the Date and X-Date header in the eMails that do not show at
the top, are set to a wrong year. Outlook is not using these dates,
SQWebmail is.
So, no problem, just a different view.
rgds
pos
___
courier-users mailing list
[EMAIL
to say.
Peer Oliver Schmidt
the internet company
___
courier-users mailing list
[EMAIL PROTECTED]
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/courier-users
Good morning,
I just installed the latest courier-0.37.3.20020306.
If I write a message with webmail and sign this message with gpg (v1.0.6)
the last line of the message gets deleted. The message
line 1
line 2
would arrive as just
line1.
Adding a blank line at the end helps. Writing
I filed a bug report with Opera regarding opening links from within Webmail.
This is what came back.
Sam, do you think it is a bug within Opera, or is the ball in webmails'
court?
rgds
pos
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Date: Fri, 22 Feb 2002 13:36:54
NO bug with opera 6.0
Excuse me, I stand corrected. It does not work on my Opera 6.0 under Windows
2000 connected to courier-0.37.2.20020125.
rgds
pos
At 14:57 22/02/2002 +0100, Peer Oliver Schmidt wrote:
I filed a bug report with Opera regarding opening links from within Webmail
David Archer writes:
First, an option that would allow someone who mistyped their password,
when returned to the login screen, would have their username still
entered, and the focus being on the password entry.
Can't help you directly here.
Second, I would like to call webmail from a
Good morning,
as I have been trying to get IMAP-SSL to work with Outlook, I found the following to
be helpful.
* Make sure to enable IMAP-SSL within $SYSCONFDIR/imapd-ssl.
* Make sure, $SYSCONFDIR/imapd.cnf contains the same CN information as the hostname
you
specified in the Outlook
Good day,
using Opera to browse thru my mail, I found out, that clicking on URLs
embedded within eMail messages does not work. A new window opens, but the
URL within says for example:
http://10.1.3.5/cgi-bin/%22http://linmodems.technion.ac.il/wgindex.html%22
This does not work. Using
Hi list,
I was playing around with makemime and sending me a PDF file using
makemime -c auto -a To: pos test.pdf|sendmail
Looking at the message in SQWebmail shows the contents of the binary PDF
file. ie. the start of the file with %PDF etc. (The mime type says
application/octet-stream)
Roland Schneider writes:
Create the same message from within SQWebmail (or any other
mime-compatible client) and compare the headers and content.
I am sure it will work fine. It does work for most of the other stuff.
Content-Type: application/pdf; name=myfile.pdf
Content-Transfer-Encoding:
Roland Schneider writes:
--Peer Oliver Schmidt wrote on 24.01.2002 20:07 +0100:
I was trying to point out, that there might be a problem within
SQWebmail, with regards to the MIME handling.
You did not provide those mime-related headers, but if two
different clients dont show
Sam Varshavchik writes:
Peer Oliver Schmidt writes:
using webmail in an intranet environment, we want to disable the hard,
or at least the softtimeouts. I tried
./configure --disable-hardtimeout --disable-softtimeout
This result in a compilation error within pcp. (see at bottom
Hi,
in the past I've been using Webmail quite a lot.
If a message comes into a folder that I currently browse thru message by
message, it will not show up, until I click onto the folder within the
folder overview.
It would be nice if all messages that are in a folder would be viewable
Good day,
using webmail in an intranet environment, we want to disable the hard, or at
least the softtimeouts. I tried
./configure --disable-hardtimeout --disable-softtimeout
This result in a compilation error within pcp. (see at bottom of the
message)
Am I doing something wrong? What would
0.9.5...
Oliver Schmidt
___
1.000.000 DM gewinnen - kostenlos tippen - http://millionenklick.web.de
[EMAIL PROTECTED], 8MB Speicher, Verschluesselung - http://freemail.web.de
___
Pilot
0 meaning Jan 1, 1970 00:00:00 GMT.
Oliver Schmidt
__
Ferienklick.de - 225 Reisekataloge auf einen Blick!
Direkt zu Ihrem Traumurlaub: http://ferienklick.de/?PP=2-0-100-105-0
file: winserial.c, reason: poor error handling, fixes:
56c56
errno = ENOENT;
---
errno = GetLastError();
Can you resend this in a unified diff, assuming your OS
can create
a sane diff? Manual diffing is a pain sometimes.
A 'unified' diff ???
Hi,
if I try to format a DD floppy with the KDE Floppy Formatter, I get the
following error message:
Cannot create a filesystem on: /dev/fd0u720
mkdosfs:unable to allocate space for FAT image in memory
I'm using KDE 2.1 and Potato.
Formatting HD Disks works.
Perhaps the problem has
/* HINT: Search archives @ http://www.indyramp.com/masq/ before posting!
/* ALSO: Don't quote this header. It makes you look lame :-) */
Part of Netware is a utility to do IPTunneling. Look in the manuals, or type
IPTUNNEL on the console (Netware). Unfortunately, the performance is not
very
regards
Peer Oliver Schmidt
#!/bin/sh
UNIVERSE="0.0.0.0/0"
IP_LNET=10.1.1.1
EXTIF="ippp0"
SQLIP=10.1.1.5
SQLPORT=1433
EXTIP=`ifconfig $EXTIF | awk '/inet addr/ { gsub(".*:", "", $2) ; print
$2 }'`
echo External IP: $EXTIP
/sbin/ipchains -F
/sbin/ipchains
401 - 484 of 484 matches
Mail list logo