Andrei Boros wrote:
options snd-opti-92x-ad1848 index=1 isapnp=1 id=Opti924 port=0x220
irq=5 dma1=0 fm_port=0x380 mpu_port=0x300 mpu_irq=7
You've specified all parameters manually, so you could try to disable
ISA PnP (isapnp=0).
And fm_port must be 0x388 (0x380 is the OPL4 port, which is
Clemens Ladisch wrote:
Andrei Boros wrote:
options snd-opti-92x-ad1848 index=1 isapnp=1 id=Opti924 port=0x220
irq=5 dma1=0 fm_port=0x380 mpu_port=0x300 mpu_irq=7
You've specified all parameters manually, so you could try to disable
ISA PnP (isapnp=0).
And fm_port must be 0x388
Andrei Boros wrote:
modprobe returns :
/lib/modules/2.2.24/misc/snd-opti92x-ad1848.o: init_module: Device or
resource busy
This means it found the card, but another driver is already loaded, or
the port/interrupts are already allocated.
Please check in /proc/interrupts and /proc/ioports that
Hi Karsten,
At Thu, 18 Sep 2003 22:57:40 +0200,
Karsten Wiese wrote:
Hallo Takashi,
here is a patch which sports complete us428 initialisation via hotplug,
an INSTALL and a README.
thanks, i'll commit them.
I took the phase 1 firmware files from usb-midi-firmware project.
Also fixed
At Sat, 20 Sep 2003 01:11:12 -0400,
Manuel Jander wrote:
Hello,
I'm implementing Hardware EQ peak visualization code in the Aureal
Vortex driver, and took as a reference the ICE1712 MultiTrack peak
kcontrol code.
The problems are:
- The peaks doesnt get updated by alsamixer nor
At Sat, 20 Sep 2003 19:51:06 +0100,
Simon Munton wrote:
Hi,
I'm using alsa 0.9.6 on a Dell Precision 530 and a Dell Dimension 8300, and I
need to use the patch below to get the volume controls to correspond to the
correct speakers.
thanks for the patch. i fixed it on cvs.
ciao,
At Mon, 22 Sep 2003 12:13:05 +0300,
Andrei Boros wrote:
alsa-utils fails to compile to compile with the following :
make all-am
make[2]: Entering directory `/serve/install/alsa-cvs/alsa-utils/include'
make[2]: Leaving directory `/serve/install/alsa-cvs/alsa-utils/include'
make[1]:
Hi all,
I'm having trouble with the Intel 82801CA-ICH3 Driver in ALSA 0.9.6. All I
here is static. I have removed the config files after uninstalling 0.9.4 and
then installing alsa-drivres, alsa-utils, and alsa-lib (0.9.6 version). And
all I get is noise?
This is hapining on a Toshiba
At Mon, 22 Sep 2003 12:06:38 +0300,
Andrei Boros wrote:
running ./cvscompile in alsa-lib (cvs tree) yields the following :
gate:~/install/alsa-cvs/alsa-lib# ./cvscompile
configure.in:44: warning: do not use m4_patsubst: use patsubst or
m4_bpatsubst
configure.in:182: warning: do not
At Tue, 23 Sep 2003 10:40:57 -0400,
Ralph Crongeyer wrote:
Hi all,
I'm having trouble with the Intel 82801CA-ICH3 Driver in ALSA 0.9.6. All I
here is static. I have removed the config files after uninstalling 0.9.4 and
then installing alsa-drivres, alsa-utils, and alsa-lib (0.9.6
Yea, I can try it. But i'm not sure how to go about it? Is it source code that
needs to be compiled?
Ralph
On Tuesday 23 September 2003 11:02 am, Takashi Iwai wrote:
At Tue, 23 Sep 2003 10:40:57 -0400,
Ralph Crongeyer wrote:
Hi all,
I'm having trouble with the Intel 82801CA-ICH3 Driver
Jaroslav,
You've probably been distracted with more pressing matters, but are you
still looking at this issue? I'd be happy to look into it or fix it
myself if you could give me some ideas of where/what/how to fix it.
Thanks,
- Steve
Steve deRosier wrote:
Jaroslav, thanks for replying. I'm
Hello,
Sorry I didn't follow-up on this sooner; I must have been
distrcted by some shiny object. I haven't had any problems
with MIDI and Jack. I've tested routing MIDI in the following
ways:
HDSP port 0 loopback
HDSP port 1 - port 0
HDSP port 0 - aseqview - HDSP port 0
HDSP
13 matches
Mail list logo
