[Alsa-devel] SuSE 9.1 Professional on Sony FR130 (via82xx) persistant stuttering problem

2004-05-21 Thread michael
I cannot get my audio working on my laptop, the funny thing is it worked fine at first, Then I had to go mess with things (install a new kernel), and cannot get it working again. The Subsystem Vendor/Device ID is 0x104d 0x8143 (Sony VAIO fr130), 82xx revision is 0x50 The IRQ (11) is shared

[Alsa-devel] digital i/o tascam usb428

2004-04-27 Thread Michael Iber
Hello, is this correct that there is no spdif-i/o-support for the tascam us428 in current alsa-cvs, and never has been before? Thanks, Michael --- This SF.net email is sponsored by: The Robotic Monkeys at ThinkGeek For a limited time only

[Alsa-devel] Am I on the right way?

2004-03-18 Thread Michael Renzmann
Hi all. I'm new to Alsa and its concepts, so I'd like to ask if the following assumptions are correct. A short explanation on the background: I'm currently examining different Voice over IP softphones on Linux. Every program that I've seen so far has the same limitation: it works with OSS. I

[Alsa-devel] Hercules Digifire [cs46xx] gameport troubles

2004-02-24 Thread Michael Huijsmans
Hi, the soundcard gameport doesn't entirely work with my analog joystick (Logitech Wingman Light, 3 axes, 2 buttons) on the gameport of the Hercules Digifire 7.1; the two buttons do work, however, no axis movement is registered. The gameport is initialized on alsa startup, the relevant modules

Re: [Alsa-devel] ISA pnp kernel 2.6

2004-02-12 Thread Michael Corlett
Takashi Iwai wrote: At Wed, 11 Feb 2004 21:57:35 +, Michael Corlett wrote: I have an ISA pnp card (opti931) which stopped working when I installed kernel 2.6 and the problem is as follows: The kernel function that sets and activates the card is isapnp_set_resources (in drivers/pnp/isapnp

[Alsa-devel] ISA pnp kernel 2.6

2004-02-11 Thread Michael Corlett
pnp_resource_change (i.e. is there now a preferred method for filling in the settings). I prefer 3) or else 2) but are there any reasons not to do this? Any advice welcome. Michael. --- SF.Net is sponsored by: Speed Start Your Linux Apps Now

[Alsa-devel] Re: [PATCH] ens1373/ct5880 - Switch Line In to Rear Out

2004-01-14 Thread Michael Huijsmans
On Tue, 13 Jan 2004 16:40:34 +0100 Takashi Iwai [EMAIL PROTECTED] wrote: At Sun, 11 Jan 2004 18:55:47 +0100, Michael Huijsmans wrote: patch to ens1370.c thanks for the patch! i applied it with a minor correction (the return value of put callback) together with clean up

[Alsa-devel] [PATCH] ens1373/ct5880 - Switch Line In to Rear Out

2004-01-11 Thread Michael Huijsmans
Hi, The Gigabyte GA-7DXR motherboard has a 4-channel SB128 (ct5880 + STAC9708/11) onboard. The line in and second line out (rear out) are wired to the same connector. After some trial-and-error with the ct5880 GPIO registers I found one which switches line in to rear out. The patch below adds

Re: [Alsa-devel] [2.6.0-test9 ALSA] ALSA-OSS-emulation unable to register

2003-11-05 Thread Michael Buesch
- -- Regards Michael Buesch [ http://www.tuxsoft.de.vu ] -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE/qO3KoxoigfggmSgRAmZlAJ9Pc0v+A26TMEaBDK3JRBQyg2IZSQCfXQFK nWARdLcbg6bSfBHBk3ytZJI= =P+AC -END PGP SIGNATURE

Re: [Alsa-devel] [2.6.0-test9 ALSA] ALSA-OSS-emulation unable to register

2003-11-04 Thread Michael Buesch
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Tuesday 04 November 2003 16:01, you wrote: what parameter did you pass exactly? snd-ens1371=1 .. and so on. Or did I misunderstand you? Takashi - -- Regards Michael Buesch [ http://www.tuxsoft.de.vu ] -BEGIN PGP SIGNATURE- Version

Re: [Alsa-devel] [2.6.0-test9 ALSA] ALSA-OSS-emulation unable to register

2003-11-04 Thread Michael Buesch
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Tuesday 04 November 2003 16:36, Takashi Iwai wrote: the first argument is enable. index is the second argument. so, you'll need to pass snd-ens1371=1,1 Now neither ALSA, nor OSS-emu works. :) Takashi - -- Regards Michael Buesch [ http

Re: [Alsa-devel] [2.6.0-test9 ALSA] ALSA-OSS-emulation unable to register

2003-11-03 Thread Michael Buesch
] ALSA Developer - www.alsa-project.org - -- Regards Michael Buesch [ http://www.tuxsoft.de.vu ] -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE/prVDoxoigfggmSgRAm/zAJ9nwkcRvzM2/w2EgYpbSZL0sZxoegCfYDBu Oq5ZWs+LPXRF0iw3MfyKySI= =Fg8x -END PGP SIGNATURE

[Alsa-devel] [2.6.0-test9 ALSA] ALSA-OSS-emulation unable to register

2003-11-02 Thread Michael Buesch
\n, register2); goto __end; + } } up(sound_oss_mutex); return 0; - -- Regards Michael Buesch [ http://www.tuxsoft.de.vu ] -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.2 (GNU/Linux) iD8DBQE/pQ5RoxoigfggmSgRAotoAJwPqKatKtf2X

[Alsa-devel] alsa-lib-0.9.2: storage size of `vec' isn't known

2003-03-28 Thread Michael Mauch
' isn't known socket.c: In function `snd_receive_fd': socket.c:78: storage size of `vec' isn't known make[2]: *** [socket.lo] Error 1 When I include sys/uio.h, it compiles. I don't know whether this is the right place for this include file, though. Regards... Michael --- src

Re: [Alsa-devel] NEW hdsp 9652 problems - {WAS: alsaconf -L - where's Waldo?)

2003-03-22 Thread Michael Ulbrich
... Michael --- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en

Re: [Alsa-devel] NEW hdsp 9652 problems - {WAS: alsaconf -L - where's Waldo?)

2003-03-22 Thread Michael Ulbrich
as Jaroslaw posted on Sun, Mar 16. Thanks ... Michael --- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi

[Alsa-devel] [PATCH] small patch for recording in opti92x-ad1848

2003-03-11 Thread Michael
recording which gives my card (931) a chance to respond. I haven't done much testing as my card just produces noise (but I believe this is a hardware problem). Part two I think is correct though, by comparison with snd_opti93x_playback_open. /Michael. --- alsa-driver-0.9.0rc8a/alsa-kernel/isa/opti9xx

Re: [Alsa-devel] Re: Phase Reversal on Santa Cruz (cs46xx)

2002-11-18 Thread Michael Alan Dorman
Kevin Puetz [EMAIL PROTECTED] writes: Now, why in the world the santa cruz would be wired in such a way that software which is fine on other cards would get one channel backwards on it is an excellent question. Espescially when there is older software that worked on all (though not so well,

[Alsa-devel] Re: S/PDIF RCA IEC958 C-Media PCI CMI8738 - can't record

2002-10-05 Thread Michael Mauch
): 32767 (0x7fff) 100% Max peak (8192 samples): 32767 (0x7fff) 100% Is this a AC3 stream or normal stereo sound? I had no luck with recording AC3 sound so far, but I get the same 100% peaks with arecord when I try. Regards... Michael

Re: [Alsa-devel] Number of subdevices on midi.

2002-04-03 Thread Michael Ashton
in whatever you come up with. cheers -- Michael Ashton [EMAIL PROTECTED] ___ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel

[Alsa-devel] rtcw,quake3 hang on exit

2002-03-20 Thread Michael Jochum
a kernel syscal that is supposed to close all open devices? so what kind of bug is this? rtcw? alsa? kernel? this is a very anoying bug for me and it would be nice if someone could help me with this problem. i have even mada a panel button to kill the hanging processes :) tia, michael

Re: [Alsa-devel] rtcw,quake3 hang on exit

2002-03-20 Thread Michael Jochum
could debug the problem? http://www.3dgamers.com/dl/games/returnwolfenstein/wolfmpdemo-linux-1.1-mp.x86.run.html its about 66MByets to download and i understand if you don`t have the time to do it - but maybe you can give me some hints to debug the problem. michael

Re: [Alsa-devel] Some sequencer docs: please check for accuracy

2001-12-06 Thread Michael Ashton
, that's a relief. I personally don't have an immediate need for the optimisation, but waste always bothers me, and when people start sending large packets I think it will be well worthwhile to make the necessary changes. -- Michael Ashton [EMAIL PROTECTED] God gave them to me; how can I

Re: [Alsa-devel] Questions about sequencer code

2001-12-06 Thread Michael Ashton
doing it myself. -- Michael Ashton [EMAIL PROTECTED] God gave them to me; how can I sell them to someone else? -- George Washington Carver, when asked why he patented only three of his hundreds of inventions ___ Alsa-devel mailing list [EMAIL

[Alsa-devel] Questions about sequencer code

2001-12-04 Thread Michael Ashton
to read directly from the pointer provided with the event? 2. The kernel code seems to have the ability to read data for variable-length packets directly out of user space, but this doesn't seem to be used by the library code - why not? -- Michael Ashton [EMAIL PROTECTED] God gave them

[Alsa-devel] Some sequencer docs: please check for accuracy

2001-12-04 Thread Michael Ashton
-space, but the library currently does not seem to make use of this. -- Michael Ashton [EMAIL PROTECTED] God gave them to me; how can I sell them to someone else? -- George Washington Carver, when asked why he patented only three of his hundreds of inventions

Re: [Alsa-devel] D-CLASS amplifier module for ALSA

2001-10-12 Thread Michael Ashton
circuit (or something) for PWM. (USB is another possibility.) cheers -- Michael Ashton [EMAIL PROTECTED] Pray for: - the souls of those who have lost, and will lose, their lives, as a result of the US terrorist attacks; - the souls of those responsible, that they may see the destruction

[Alsa-devel] Philips Acoustic Edge

2001-10-11 Thread Michael Staggs
I asked Philips for information needed to build linux drivers as per the ALSA call to contributors. The reply I got was very disheartening: Philips continues to watch the Linux market and driver development will be related to increased adoption of the Linux software as a business and