On Friday 06 June 2003 02:35, Takashi Iwai wrote:
> > > the changes were committed to cvs now, so please give a try.
> >
> > The changes you made allowed me to play sound through the device, but
> > I still get those usb-check-bandwidth messages, regardless of whether
> > or not I used the "nrpacks
At Fri, 6 Jun 2003 00:34:53 -0600,
Ross Miller wrote:
>
> On Wednesday 04 June 2003 06:47, Takashi Iwai wrote:
>
> > a possible reason is that either we set up the interface correctly, or
> > we pass too many packets for the requested status.
> > i added nrpacks module option in usbaudio driver.
On Wednesday 04 June 2003 06:47, Takashi Iwai wrote:
> a possible reason is that either we set up the interface correctly, or
> we pass too many packets for the requested status.
> i added nrpacks module option in usbaudio driver. please set
> nrpacks=2 to reduce the max number of URB packets.
>
Ross Miller wrote:
> On Tuesday 03 June 2003 01:03, Clemmens Ladisch wrote:
> > Are you sure that the Optoplay supports _one_-channel output?
> >
> That's a good question - I'll try a stereo WAV later this evening after I get
> off work.
It doesn't, but your aplay command used the "default" device
At Mon, 2 Jun 2003 14:18:26 -0600,
Ross Miller wrote:
>
> Also, the following lines are printed in the syslog:
> May 24 23:28:17 snoopy kernel: usb-uhci.c: interrupt, status 2, frame# 985
> May 24 23:28:18 snoopy kernel: usb_control/bulk_msg: timeout
> May 24 23:28:18 snoopy kernel: ALSA ../alsa-k
On Tuesday 03 June 2003 01:03, Clemmens Ladisch wrote:
> > CHANNELS: 1
> > ...
>
> Are you sure that the Optoplay supports _one_-channel output?
>
That's a good question - I'll try a stereo WAV later this evening after I get
off work.
> Please post the contents of /proc/asound/cardX/stream0 and t
Ross Miller wrote:
> There was a thread on the alsa-user list back in March discussing Audiotrack
> products, and specifically the Optoplay USB device. The relevant bits are:
>
> >> The Optoplay, listed as '?' on the matrix, seemed to work OK, the drivers
> >> loaded but - no sound output. This is
Note: This is a repost of an email I sent a week ago which is still awaiting
moderator approval. I'm now a subscriber, so hopefully this post will go
right through
There was a thread on the alsa-user list back in March discussing Audiotrack
products, and specifically the Optoplay USB devi
