the hdsp driver still seems to have problems with the new pci
card. It's a little complicated for me to give exact information as
the machine is in Rotterdam and I'm in Berlin. I got The following
email from the sysadmin of the machine:
i have an hdsp-9652 here that i haven't installed yet. it
Hi,
the driver/interface works. The guy in Rotterdam tried the line
outputs on the front (I realized that this might have been the reason
5 minutes after I posted my previous mail).
Since the hdsp code reports firmware load failure there still might be
something wrong, but the Multiface plays
Am Freitag, den 14. Februar 2003 um 08:30:24 Uhr (-0500) schrieb Paul Davis:
the driver/interface works. The guy in Rotterdam tried the line
outputs on the front (I realized that this might have been the reason
5 minutes after I posted my previous mail).
can you clarify what you mean by
On Fri, Feb 14, 2003 at 08:30:24AM -0500, Paul Davis wrote:
the driver/interface works. The guy in Rotterdam tried the line
outputs on the front (I realized that this might have been the reason
5 minutes after I posted my previous mail).
can you clarify what you mean by this?
Since the
It means he didn't use the rear outputs for checking but the line outs
on the front of the Multifaceq which are muted even if alsamixers
controls are up afaik.
FYI this (from modules.conf) will turn on line out monitoring by
default (all channels, unity gain):
options snd-hdsp snd_id=hdsp
Maybe an unneccesary and stupid remark, but are you sure that the line out
will support headphones?
Maybe you should try it with a regular amp.
Gerard
But I can't get any sound out of the box (use headphone in line out) and
setting all channels to 30 in alsamixer.
Probably because the
got this additional Info from R'dam for those interested.
Wasn't the warm boot corrected with the old firmware?
no. it was connected with a bug in the driver that marcus fixed. on
little-endian platforms we failed to write a terminating byte to the
FIFO at the end of the firmware load.
i
Am Freitag, den 14. Februar 2003 um 10:49:03 Uhr (-0500) schrieb Paul Davis:
i believe that this patch is in CVS, but i haven't checked. i assume
the R'dam system is using the latest code?
Yes.
--
Orm
---
This SF.NET email is sponsored by: