Thanks to all who have replied to my questions. It appears that since I am
using the .5xx version of alsa I am going to have to upgrade to the .9xx
version.
Is there an easy way to do this with Mandrake 8.2 because when I try and
un-install the .5xx version via the Software Mangaer, it want's
I don't have a snd-mixer loaded (only snd-mixer-oss) and my native alsa
mixers all work fine (gamix, alsamixer, amixer). I think the problem your
having must be elsewhere.
On Fri, 22 Mar 2002, Marius Reiner wrote:
> Hi,
> i've read the INSTALL, HOWTO and mini-HOWTO again and again, but there'
Hi,
i've read the INSTALL, HOWTO and mini-HOWTO again and again, but there's
one thing i can't find:
how snd-mixer should be loaded
My soundcard is a SB PCI 128, i compiled the kernel with builtin
soundcore and without any other sounddrivers, i installed the
alsa-drivers, lib, then utils, several
I've a problem:
CardSIS 7018
ChipCirruslogic CS 4299
Kernel module loadedsnd-card-triden
Bus PCI
ALSA service seems running at boot
SOUND service seems running at boot
I'm able to play and listen CD audio
I'm able to play mp3 file
Yes I did get that message and have tried both the alsa mixer and the Envy
control mixer to unmute and raise the gain on all my channels.
They are unmuted and at full gain, including the master,
It seems I am getting an error message with aplay that states:
"Cant set Channel Parms"..
Whateve
On Fri, Mar 22, 2002 at 01:14:40PM -0500, rich man wrote:
>
> Sorry, I forgot to list my installed modules:
(snip)
During installation, you should have gotten a message that
ALSA drivers are muted by default. Did you check that?
Try installing envy24control from the alsa-tools package,
and use t
One last thing (I hope!), I just discovered the aplay utility and when I use
it to play a *.wave file I get the following error:
aplay route66
Aplay: version 0.5.10 by Jaroslav Kysela <[EMAIL PROTECTED]>
Using soundcard 'M Audio Delta 66 at 0xc400, irq 10'
Playing WAVE 'route66' : Signed 16-bit
Sorry, I forgot to list my installed modules:
Module Size Used byNot tainted
sr_mod 15160 0 (autoclean) (unused)
snd-seq-oss25600 0 (unused)
snd-seq-midi-event 3184 0 [snd-seq-oss]
snd-seq40880 0 [snd-seq-oss snd-
Hi,
I have been trying for a while to get a Midiman Delta 66 to work with the
alsa drivers.
I have tried various distributions all with the same results, the card loads
and looks fine (I think!) but I get no sound.
Currently I am using Mandrake 8.2 with the version of alsa that comes with
it
I compiled my kernel without any fb type of support
and I'm still getting dropouts. I recall that when
I first booted my new kernel, I don't think I was getting
dropouts and it's only later when I installed some custom
modules like lirc or vmware or bttv that things started to
get bad, but I ca
On Wed, 20 Mar 2002 01:58:24 -0700
Brian Retford <[EMAIL PROTECTED]> wrote:
> Hi,
> I've tried just about everything to get ens1371 modules to install on my debian
>system. I have no idea what the problem is, except that it might have something to do
>with my card being on pci bus 2, instead of
As a follow up on my problems with getting sound out
of
this card. Not knowing what else to do I have modified
the ice1712.c file to make it see my 1010lt as a 1010.
This looks like it almost works, the sound drivers
load, i can aplay and arecord using plughw:0 and when
playing a reasonable sig
* Zinx Verituse <[EMAIL PROTECTED]> [2002-03-21 15:47]:
> Try giving the mic a +5v Bias, and turning on the 30 dB boost:
>
> amixer cset numid=44,iface=CARD,name='Mic +5V bias'on
> amixer cset numid=42,iface=MIXER,name='Mic Boost (+30dB)'on
That would probably help, but did not completely fixed
13 matches
Mail list logo
