On Thursday 20 November 2003 00:15, David Garcia wrote:
>Timidity is a software (CPU wasting) synth that synths audio (say
> wav) from midi information. That audio information can be played by
> any Wav device so its sound level is controlled by pcm/wav
> controls.
>
>Mainly, kmidi is a kde fronten
Hello, I am having three particular issues that I was hopeing someone
might have some insight into. I have an ice1712 card and would like to
be able to have the digital mixer mix xmms & fluidsynth so I can jam
with mp3s. Here is the asoundrc I have created so far:
pcm.44_1 {
type dshare
Timidity is a software (CPU wasting) synth that synths audio (say wav)
from midi information. That audio information can be played by any Wav
device so its sound level is controlled by pcm/wav controls.
Mainly, kmidi is a kde frontend to timidity. On the other side, kmid
uses any of the available
I am currently working on a 'no-compilation, no-installation,
no-programming' user manual for Alsa-Jack-Ladspa.
I wanted to bring some friends of mine to Linux. They use Windows based
music software, so i intended to do some introduction (in spanish) to the
capababilities of Alsa-Jack-Ladspa(-Lad
On Wednesday 19 November 2003 19:37, Gene Heskett wrote:
>Greetings all;
Yeah, I know, its poor form to answer/comment on ones own messages,
but more info below.
>I've recently moved to a kernel-2.6.0-test9-mm4, which is getting
>pretty close to final. The formerly OSS audio system has been
>r
Hi, i downloaded alsa 1 and installed but when i restart my systemthe 0.9
still loading, how i have to make the change form 0.9 to 1.
Thanx
Gonzalo Zapata
---
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net h
On 19 Nov 2003 17:30:29 -0800 Fernando Pablo Lopez-Lezcano
<[EMAIL PROTECTED]> wrote:
> > as you might have already seen on the web news page, we released
> > 1.0.0pre1 tarball. This is intended for the wide tests before the
> > official 1.0.0 release. We planned to release 1.0.0 (hopefully) in
> as you might have already seen on the web news page, we released
> 1.0.0pre1 tarball. This is intended for the wide tests before the
> official 1.0.0 release. We planned to release 1.0.0 (hopefully) in
> this month, so please everyone test this version and give bug reports
> now.
Looks like so
Hi,
I have a motherboard with an nForce2 chipset and the CMI9739 AC97 codec.
As some helpful person has pointed out, the Chip lacks a PCM-Out volume
control in hardware. All there is, is the mute bit.
Now, using alsa-libs plugin arcitecture, can I implement volume control in
software (maybe by ev
Greetings all;
I've recently moved to a kernel-2.6.0-test9-mm4, which is getting
pretty close to final. The formerly OSS audio system has been
replaced with alsasound, and can be built right into the kernel,
which I have.
Most of the audio functions are working, with the notable exception of
It was hard and I hope it's nearly the end. I have succeeded in
activating the gameport.
I use Alsa included with my 2.6-test9 kernel. I activated the gameport
using alsactl-store and restore.
[EMAIL PROTECTED] thibaut $ cat /proc/asound/card0/audiopci
Ensoniq AudioPCI ES1371
Joystick enable : on
Hallo,
[EMAIL PROTECTED] hat gesagt: // [EMAIL PROTECTED] wrote:
> Thanks for your prompt replies & recommendations. Unfortunately, the Delta
> series is PCI based, which excludes them from working with a laptop. The
> Midiman product line does look pretty good, and the M-audio Mobile Pre
> (http:
> First I've been told by those who know that USB isn't real great
> as it has latency problems. You might look at the Midiman
> (www.midiman.com) Delta cards. They have a Delta 66 and a Delta 44
> with 6 and 4 channels respectively.
Thanks for your prompt replies & recommendations. Unfortun
Clemens Ladisch wrote:
>
>> What is this? I have no sound output [using ALSA 0.9.8]
>
> No rear, or no sound at all?
>
No sound at all. Nothing.
>> do you think it will work if I get a new version, or it's a
>> hopeless dream?
>
> The new ALSA code works on my P4P800 (maybe because I wrote it), s
When using alsaconf the soundcard is now detected. When I choose it the
configuration in /etc/alsa/modules/0.9 seems to work but afterwards when
alsa is started I get the following error:
Starting ALSA (version 0.9.6): ice1724-failed failed
Is there a log file somewhere where the error message is
On 19 Nov 2003, Clemens Ladisch <[EMAIL PROTECTED]> wrote:
> Henri wrote:
>
> > On 19 Nov 2003, Clemens Ladisch <[EMAIL PROTECTED]> wrote:
> >
> > > [EMAIL PROTECTED] wrote:
> > > > it fails on the call to "snd_ctl_elem_write".
> > >
> > > What is the error code/message?
> >
> > "No such file or
Hello. Can it be this difficult? We should have better user docs, I see.
I'm testing a MIDI keyboard with SB Live/LiveDrive, but Alsa
receives no MIDI. I tested "cat -v" on every midi device I found
and used rawmidi program.
I checked at MS Windows. The correct driver is "SB Live! Midi In [C000]"
Michael Hunold wrote:
> > The CMI chip doesn't support recording raw subframes, it only records
> > the PCM data contained in these frames (i.e., -f S16_LE).
>
> Just to clarify this: it's not possible to record raw iec958 frames with
> this card, ie. frames with untouched ac3 data?
I've never us
Henri wrote:
> On 19 Nov 2003, Clemens Ladisch <[EMAIL PROTECTED]> wrote:
>
> > [EMAIL PROTECTED] wrote:
> > > it fails on the call to "snd_ctl_elem_write".
> >
> > What is the error code/message?
>
> "No such file or directory"
= "control not found"
> > > the snd_pcm_info_get_device(info) and
Alberto Monteiro wrote:
> Clemens Ladisch wrote:
> >
> > Install ALSA 1.0.0pre1, then set the appropriate mixer controls.
> >
> What is this? I have no sound output [using ALSA 0.9.8]
No rear, or no sound at all?
> do you think it will work if I get a new version, or it's a
> hopeless dream?
Th
here is a follow up (still having trouble). this time using mplayer
mplayer -ao alsa9:spdif movie.avi
VIDEO: [DIV3] 460x340 24bpp 25.000 fps 985.8 kbps (120.3 kbyte/s)
==
Opening audio decoder: [mp3lib] MPEG layer-2
Dear All,
I have installed RedHat Linux (2.4.20-8) on an Omnibook Xe3 GC with ESS
Allegro-1 soundcard. I'm using the 0.9.8 ALSA release, but unfortunately
I have experienced a problem with the microphone. Actually I can not
record anything with the microphone but noise. The speech is audible
o
Hi all,
as you might have already seen on the web news page, we released
1.0.0pre1 tarball. This is intended for the wide tests before the
official 1.0.0 release. We planned to release 1.0.0 (hopefully) in
this month, so please everyone test this version and give bug reports
now.
Especially, if
On 19 Nov 2003, Clemens Ladisch <[EMAIL PROTECTED]> wrote:
> [EMAIL PROTECTED] wrote:
> > picked up a Hercules DigiFire 7.1 card today. CS46xx based.
> >
> > but ogle fails to configure the device correctly. the ogle
> > code is at the bottom of the email. it fails on the call to
> > "snd_ctl_ele
At Wed, 19 Nov 2003 11:25:51 + (GMT),
[EMAIL PROTECTED] wrote:
>
> Hello,
>
> Thanks to all those who made Alsa, its great and has helped me achieve one of my
> goals - AC3 / DTS output via the digital SPDIF on my system! This means I can
> playback DVD's using xine with full Dolby Digital
Hello Clemens,
% arecord -v -v -D hw:0,2 -f IEC958_SUBFRAME_LE -r 44100 -c 2 -t raw a.raw
Recording raw data 'a.raw' : IEC-958 Little Endian, Rate 44100 Hz, Stereo
arecord: set_params:828: Sample format non available
The CMI chip doesn't support recording raw subframes, it only records
the PCM da
At Wed, 19 Nov 2003 13:46:00 +,
Alberto Monteiro wrote:
>
> Clemens Ladisch wrote:
> >
> > Install ALSA 1.0.0pre1, then set the appropriate mixer controls.
> >
> What is this? I have no sound output [using ALSA 0.9.8], do you
> think it will work if I get a new version, or it's a hopeless drea
Hello,
I own an emu10k1 card, and I've always used multiple applications at the
same time sharing the pcm; I always thought this was normal ( it was my
first sound card apart from a "soundblaster 8" ) with pci soundcards.
that was using oss, lately I tried alsa as I came across an onboard card
tha
Clemens Ladisch wrote:
>
> Install ALSA 1.0.0pre1, then set the appropriate mixer controls.
>
What is this? I have no sound output [using ALSA 0.9.8], do you
think it will work if I get a new version, or it's a hopeless dream?
Alberto Monteiro
---
Hello,
Thanks to all those who made Alsa, its great and has helped me achieve one of my goals
- AC3 / DTS output via the digital SPDIF on my system! This means I can playback DVD's
using xine with full Dolby Digital 5.1 sound.
I've seen lots of people asking if this is possible with my particul
Hi all,
I have recently bought an Echo Audio Indigo PCMCIA card for my notebook. I
was wondering if there is any support for it under Linux: this card is not
present in the ALSA Soundcard Matrix.
Can you help me?
Regards
Luigi
[EMAIL PROTECTED] wrote:
> picked up a Hercules DigiFire 7.1 card today. CS46xx based.
>
> but ogle fails to configure the device correctly. the ogle
> code is at the bottom of the email. it fails on the call to
> "snd_ctl_elem_write".
What is the error code/message?
> the snd_pcm_info_get_device
Hello,
Thanks to all those who made Alsa, its great and has helped me achieve one of my goals
- AC3 / DTS output via the digital SPDIF on my system! This means I can playback DVD's
using xine with full Dolby Digital 5.1 sound.
I've seen lots of people asking if this is possible with my particul
On Tue, 18 Nov 2003, Michael Mauch wrote:
> Michael Hunold wrote:
> > In theory, I'd like to record the raw iec958 subframes, but using
> > arecord like this fails:
> >
> > > arecord -v -D hw:0,2 -f IEC958_SUBFRAME_LE
> > arecord: begin_wave:1608: Wave doesn't support IEC958_SUBFRAME_LE format...
>
Tony Roba wrote:
> Hi ,I'm using aPentium III 500 with REDHAT 9.0 (2.4.20-8 kernelversion) and
> a ALS120 (avance logic) soundcard.I'm trying to make it work with the
> ALSA-driver 0.9.8.Download all from
> alsa-project.org.unzipped,untard,configured,maked ,and maked install.All
> this with no comp
marco wrote:
> # insmod snd-powermac
> init_module: No such device
>
> In syslog I find :
>
> kernel: ALSA pmac.c:1104: pmac: can't request resource 0!
> kernel: no PMac soundchip found
>
> In dmesg :
> ...
> Audio jack unplugged, enabling speakers.
> AE-Init snapper mixer
> PowerMac Snapper DMA s
Frank Hart wrote:
> I'm trying to get the onboard AC97 to work. Strange thing about
> this card is the multiple audio ports configs that are possible.
> [...]
> Is there documentation about reprogramming the ports on this card?
The data sheet for the AD1985 codec is available at
http://www.analog.
Hi !
Just would like to add this "simple" solution to the list, maybe it could help
someone...
I also would like to say thanks to everyone who makes linux - audio possible.
Thanks to All !
*** Alsa - midi - midiport - via82xx***
The following example seems
Hello,
Thanks to all those who made Alsa, its great and has helped me achieve one of my goals
- AC3 / DTS output via the digital SPDIF on my system! This means I can playback DVD's
using xine with full Dolby Digital 5.1 sound.
I've seen lots of people asking if this is possible with my particul
Hi folks,
I usually see the message below in /var/log/messages. Using alsa 0.9.8 over
a SuSE 8.1's 2.4.19-4GB, modutils 2.4.26.
It doesn't happen w/ all the played sounds.
kernel: ALSA ../alsa-kernel/core/pcm_lib.c:216: Unexpected hw_pointer value
(stream = 0, delta: -62, max jitter = 8192): wr
Hi,
Here is my problem :
I've an onboard soundcard. My motherboard is a Gigabyte GA-8KNXP with a
Realtek ALC655 AC97 compliant onboard soundcard.
I'm using ALSA 0.9.6 on a SuSE 9.0 distrib, but I compiled the 0.9.8 release
to see if it changes something. The driver used by the Alsa conf is
snd-in
hey,
using alsa 1.0.0pre1
picked up a Hercules DigiFire 7.1 card today. CS46xx based.
i only have an optical s/pdif cable in the card going to my amp
normal stuff works fine (using the oss compat module). i get
nice clean sound. but what i really want to do is play dvds
w/ ogle and get the su
42 matches
Mail list logo