Hi!I'm trying to use the optical S/PDIF out on my Abit KN8-Ultra motherboard (nForce4 based).I've managed to set things up so that I can play PCM data and AC3 data using my Sony STR-925 receiver. The only problem left, is that when I start playing an AC3 stream, after playing PCM data, the
At Thu, 19 Jan 2006 13:55:38 -0600,
Joel Bison wrote:
On 1/19/06, Takashi Iwai [EMAIL PROTECTED] wrote:
At Wed, 18 Jan 2006 22:50:36 -0600, Joel Bison wrote:
I'm having some interesting trouble getting dmix to work properly with
snd-cs46xx, using the 1.0.10rc1 bundled with 2.6.14.3
Marcus Agehall wrote:
Hi!
I'm trying to use the optical S/PDIF out on my Abit KN8-Ultra motherboard
(nForce4 based).
I've managed to set things up so that I can play PCM data and AC3 data using
my Sony STR-925 receiver. The only problem left, is that when I start
playing an AC3 stream, after
Hi to all,
I have a Fedora Core 3 2,66 GHz-machine with low-latency kernel (Planet
CCRMA).
All soundcard stuff is working fine except USB cards :
I've tested an emagic emi6|2m :
It runs with 48kHz, 128 Samples/frame :
2 periods doesn't work (over/underruns -- just confusion ...)
3 is working
Regarding
Due to lack of documentaton, we are unable to set the non-audio S/PDIF
bits on the interface. You are just lucky that your receiver can decode
AC3 without the non-audio bit set
Is there a possibility to make a snapshot of registers under
Windows when the bit in question is set ?
Am Freitag Januar 20 2006 16:08 schrieb Sergei Steshenko:
Regarding
Due to lack of documentaton, we are unable to set the non-audio S/PDIF
bits on the interface. You are just lucky that your receiver can decode
AC3 without the non-audio bit set
Is there a possibility to make a snapshot
Even better.
On Fri, 20 Jan 2006 16:16:54 +0100
Prakash Punnoor [EMAIL PROTECTED] wrote:
Am Freitag Januar 20 2006 16:08 schrieb Sergei Steshenko:
Regarding
Due to lack of documentaton, we are unable to set the non-audio S/PDIF
bits on the interface. You are just lucky that your
Hi alsa users,
I am trying to get a mentioned card to work. unable to find the error.
So I downloaded the alsa-driver-1.0.9.tar.bz2 archive to have the latest
drivers.
lspci:
:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS]
Sound Controller
Hello,
i'm new to the list and i have (maybe a stupid) problem. I'm using a
terratec 5.1 soundcard and everything works fine until now :). But since
i try to use the optical input i see an issue. I don't know how to
record the input. I can hear the sound on the lodspeaker, but i'm not
able to
Hello,
I recently installed Debian/etch/amd64 on my new PC -- but I've got great
troubles getting the sound working. Only xmms works; aplay
repeats itself 3 times a second, and tuxpaint doesn't play anything, and
hangs when I try to quit...
The sound card in question is the on-board chip of the
Hi Lorenz. It sounds like your card is like my Audigy2 soundblaster then. You
will need to load a soundfont onto the card. If you have the cdrom for the
card, the soundfont (.sf2) should be somewhere on it, and you'll need to copy
it to your home directory. If you havn't got the cdrom, you
On Friday 20 January 2006 22:45, Lorenz Hopfmüller wrote:
Hi Lorenz. It sounds like your card is like my Audigy2 soundblaster then.
You will need to load a soundfont onto the card. If you have the cdrom
for the card, the soundfont (.sf2) should be somewhere on it, and you'll
need to copy
OK. I have a solution and a working asound.conf file. The setup below
allows me to use two seperate stereo channels to output MPD streams.
This is working well now.
My only remaining problem is how to use XMMS with this config file. Everytime I try it it is blocked. Any suggestions?
On Fri, 2006-01-20 at 19:52 -0500, Rich Rosa wrote:
OK. I have a solution and a working asound.conf file. The setup below
allows me to use two seperate stereo channels to output MPD streams.
This is working well now.
My only remaining problem is how to use XMMS with this config file.
On Fri, 2006-01-20 at 13:21 +0100, Alexander Carôt wrote:
Hi to all,
I have a Fedora Core 3 2,66 GHz-machine with low-latency kernel (Planet
CCRMA).
P.S.: Similar behavior I experience with a cheap soundblaster MP3+.
Is this a laptop? You may be experiencing the ACPI/SMM bug.
You are
On Fri, 2006-01-20 at 17:00 +, Sebastian Reitenbach wrote:
Hi alsa users,
I am trying to get a mentioned card to work. unable to find the error.
So I downloaded the alsa-driver-1.0.9.tar.bz2 archive to have the latest
drivers.
That is NOT the latest version!
On Fri, 2006-01-20 at 21:52 +0100, Patrick Plattes wrote:
Hello,
i'm new to the list and i have (maybe a stupid) problem. I'm using a
terratec 5.1 soundcard and everything works fine until now :). But since
i try to use the optical input i see an issue. I don't know how to
record the input.
On Fri, 2006-01-20 at 22:45 +0100, Lorenz Hopfmüller wrote:
I need a card which costs less than 25 €(Euro), plays MIDI without problems
and in a good qualiti and is complitliy compatible with alsa.
Which one should I choose?
I don't want to buy a wrong again, you understand?
This describes
My XMMS settings are:
audio device: pcm:channel12
Mixer Card: M-Audio Delta 1010LT
Mixer Device: PCM
On 1/20/06, Lee Revell [EMAIL PROTECTED] wrote:
On Fri, 2006-01-20 at 19:52 -0500, Rich Rosa wrote: OK. I have a solution and a working asound.conf file. The setup below allows me to use two
On Fri, 2006-01-20 at 20:44 -0500, Rich Rosa wrote:
My XMMS settings are:
audio device: pcm:channel12
Mixer Card: M-Audio Delta 1010LT
Mixer Device: PCM
I have absolutely no idea why this won't work. If aplay works then XMMS
should.
Try stracing it.
Lee
On Fri, 2006-01-20 at 20:44 -0500, Rich Rosa wrote:
My XMMS settings are:
audio device: pcm:channel12
Mixer Card: M-Audio Delta 1010LT
Mixer Device: PCM
Also your Bindings syntax is still completely wrong, see my previous
email.
Lee
On Fri, 2006-01-20 at 20:44 -0500, Rich Rosa wrote:
My XMMS settings are:
audio device: pcm:channel12
Mixer Card: M-Audio Delta 1010LT
Mixer Device: PCM
What is the output of:
$ grep pcm ~/.xmms/config
pcm_device=default
It should say:
pcm_device=channel12
Lee
OK, I have two soundcards on my laptop. One is an internal one (Cirrus Logic )
and one of the tv-card (saa7133). No all I want is to direct the tv-sound to
the internal soundcard. There is no cable-solution, since the tv-card has no
audio-out.
If I start the oss-compatiblilty layer, I can
If I use software mixer control it works!!
Thanks for all your help. On 1/20/06, Lee Revell [EMAIL PROTECTED] wrote:
On Fri, 2006-01-20 at 20:44 -0500, Rich Rosa wrote: My XMMS settings are: audio device: pcm:channel12 Mixer Card: M-Audio Delta 1010LT Mixer Device: PCMI have absolutely no idea
On Fri, 2006-01-20 at 21:06 -0500, Rich Rosa wrote:
If I use software mixer control it works!!
Thanks for all your help.
That's very strange, where exactly is the configuration item in XMMS to
do this and what exactly did you change?
Lee
On 1/19/06, Takashi Iwai [EMAIL PROTECTED] wrote:
No, it should work as it is.
Could you check whether you really compiled with NEW_DSP config by the
number of substreams listed in /proc/asound/card0/pcm0p/info?
Also, how did you test the multiple playbacks? As a simple test, try
to run
I am running alsa (mandrake 10.1 alsa version 1.0.6-- so maybe this is
fixed later). If I run alsamixer, I get controls
Headphone, PCM, FronMic, Surround, Center, LFE, Line, CD, Mic,PCSpeaker,
Capture, Capture, Channel, InputSo, Input So.
HOwever the only control that seems to affect output
On Fri, 2006-01-20 at 18:11 -0800, Bill Unruh wrote:
I am running alsa (mandrake 10.1 alsa version 1.0.6-- so maybe this is
fixed later). If I run alsamixer, I get controls
Headphone, PCM, FronMic, Surround, Center, LFE, Line, CD, Mic,PCSpeaker,
Capture, Capture, Channel, InputSo, Input So.
On Fri, 20 Jan 2006, Lee Revell wrote:
On Fri, 2006-01-20 at 18:11 -0800, Bill Unruh wrote:
I am running alsa (mandrake 10.1 alsa version 1.0.6-- so maybe this is
fixed later). If I run alsamixer, I get controls
Headphone, PCM, FronMic, Surround, Center, LFE, Line, CD, Mic,PCSpeaker,
On Fri, 2006-01-20 at 23:30 -0800, Bill Unruh wrote:
On Fri, 20 Jan 2006, Lee Revell wrote:
On Fri, 2006-01-20 at 18:11 -0800, Bill Unruh wrote:
I am running alsa (mandrake 10.1 alsa version 1.0.6-- so maybe this is
fixed later). If I run alsamixer, I get controls
Headphone, PCM,
On Fri, 2006-01-20 at 23:30 -0800, Bill Unruh wrote:
The question of course is NOT why aumix has a volume control which
works
but why the alsa mixer (which surely is part of alsa) has no volume
control, and as a result I could not turn up the output volume using
alsamixer.
Surely the
On Sat, 21 Jan 2006, Lee Revell wrote:
On Fri, 2006-01-20 at 23:30 -0800, Bill Unruh wrote:
The question of course is NOT why aumix has a volume control which
works
but why the alsa mixer (which surely is part of alsa) has no volume
control, and as a result I could not turn up the output
32 matches
Mail list logo
