I have most everything working now, but I am unable to play XviD-encoded
video files now. No matter what player I use, the file starts to
open/play and then the player crashes. This is the same thing that was
happening with ALL media files when I was trying to play them on the
original soundcard.
I am running a Gentoo based 32bit system.
I have a SB 5.1 Live card as my primary sound card (my speakers are
connected here) and also an RME HDSP9652 for audio recording
purposes. I would like to be able to use the ADAT input source on
the RME card and have that signal play through the SB 5.1 Li
On Fri, 17 Feb 2006, Lee Revell wrote:
> You can test like:
>
> grep dmix /usr/share/alsa/cards/ICE1724.conf
>
> If you get no output your alsa-lib is too old.
I get:
# default with dmix & dsnoop
strings [ "dmix:" $CARD ",FORMAT=S32_LE"
> > Here's still the big ques
On Sat, 2006-02-18 at 02:19 +0200, Jaakko Niemi wrote:
> On Fri, 17 Feb 2006, Jim Gleason wrote:
> > I have looked and made sure my mixer volumes are up and that everything
> > is enabled or unmuted that I know how to. I have attached my "amixer"
> > output as myamixer.out and "amixer contents" ou
On Fri, 2006-02-17 at 17:35 -0700, Jim Gleason wrote:
> > > > .asoundrc is not needed at all for this card anymore to get software
> > > > mixing. You must upgrade alsa-lib to 1.0.11-rc3, not just alsa-driver.
>
> > You can test like:
> >
> > grep dmix /usr/share/alsa/cards/ICE1724.conf
> >
> >
> > > .asoundrc is not needed at all for this card anymore to get software
> > > mixing. You must upgrade alsa-lib to 1.0.11-rc3, not just alsa-driver.
> You can test like:
>
> grep dmix /usr/share/alsa/cards/ICE1724.conf
>
> If you get no output your alsa-lib is too old.
I had already built an
On Fri, 17 Feb 2006, Jim Gleason wrote:
> I have looked and made sure my mixer volumes are up and that everything
> is enabled or unmuted that I know how to. I have attached my "amixer"
> output as myamixer.out and "amixer contents" output as
> myamixer.contents.out in case someone can spot someth
On Fri, 2006-02-17 at 16:56 -0700, Jim Gleason wrote:
> I have looked and made sure my mixer volumes are up and that everything
> is enabled or unmuted that I know how to. I have attached my "amixer"
> output as myamixer.out and "amixer contents" output as
> myamixer.contents.out in case someone c
On Sat, 2006-02-18 at 01:45 +0200, Jaakko Niemi wrote:
> On Fri, 17 Feb 2006, Lee Revell wrote:
> > > Still wondering about the microphone. Might need envy24control
> > > to get the input levels set..
> >
> > .asoundrc is not needed at all for this card anymore to get software
> > mixing. You m
I have looked and made sure my mixer volumes are up and that everything
is enabled or unmuted that I know how to. I have attached my "amixer"
output as myamixer.out and "amixer contents" output as
myamixer.contents.out in case someone can spot something I am missing.
I have a receiver attached wi
On Fri, 17 Feb 2006, Lee Revell wrote:
> > Still wondering about the microphone. Might need envy24control
> > to get the input levels set..
>
> .asoundrc is not needed at all for this card anymore to get software
> mixing. You must upgrade alsa-lib to 1.0.11-rc3, not just alsa-driver.
I'm usi
On Sat, 2006-02-18 at 00:29 +0200, Jaakko Niemi wrote:
> On Fri, 17 Feb 2006, Jim Gleason wrote:
> > Yes I know. I'm running a locally built 1.0.11rc3 copy. If anybody can
> > give me some hints on where to look or things to try I can help here
> (I'm a developer).
>
> Attached are my .asound
On Thu, 2006-02-16 at 13:35 +, Michael Tweedale wrote:
> * Has this problem been fixed in the latest ALSA rc?
> * Is it possible to fix and on someone's todo list, or are any hopes
> of
> a solution in the coming months in vain?
It's impossible to tell a priori, you'll have to try it.
Lee
On Fri, 17 Feb 2006, Jim Gleason wrote:
> Yes I know. I'm running a locally built 1.0.11rc3 copy. If anybody can
> give me some hints on where to look or things to try I can help here
(I'm a developer).
Attached are my .asoundrc and my amixer output with my
hercules fortissimo 4 card. I need
Yes I know. I'm running a locally built 1.0.11rc3 copy. If anybody can
give me some hints on where to look or things to try I can help here
(I'm a developer).
Jim Gleason
On Fri, 2006-02-17 at 23:46 +0200, Jaakko Niemi wrote:
> On Wed, 15 Feb 2006, Jim Gleason wrote:
> > All,
> > I am an experi
On Wed, 15 Feb 2006, Jim Gleason wrote:
> All,
> I am an experienced Linux developer, but am a relative newby to the
> intricies of the ALSA environment. I have been trying to get the
> Prodigy 7.1 LT card to work and have run into a few problems. The
> analog works just fine, but I have not been
Hi,
They are commented out in audigy_init.
Peter Zubaj
On Friday 17 February 2006 18:04, EmIScA wrote:
> I've finally got an Audigy 1 card, which does hw mixing... bye bye
> dmix/dsnoop and oss app problems!
> I installed the ld10k1 and qlo10k1 utilities (1.0.10) and loaded the
> init_audigy scr
okay... yes.. qjackctl... did it.. setting to 22050Hz.
Also, only recording one source gives mono (duh).
I AM able to set the bit rate... 8bit is terrible, but
16bit works, so this is good enough.
Thanks!
david
On 2/16/06, David Slimp <[EMAIL PROTECTED]> wrote:
> HA!Thanks. :)
> I think I
On Fri, 17 Feb 2006, Peter [ISO-8859-15] Schütt wrote:
Hallo,
hin und wieder passiert es bei mir, daß irgend ein Programm /tmp
auf 755 setzt, was dann dazu führt, daß sich kein normaler Benutzer mehr
einloggen kann.
/tmp is ( should be) owned by root. Thus it is ONLY a root program that
could
Am Freitag, 17. Februar 2006 18:54 schrieb Jeff Ballard:
> # arecord -Dpd -fcd -v
Try something like
arecord -Ddefault:1 -fdat -v | aplay -vv
Greetings,
Stefan
--
Stefan Brüns / Kastanienweg 6 - Zimmer 1206 / 52074 Aachen
mailto:[EMAIL PROTECTED] http://www.kawo1.rwth-aachen.de/~lurchi/
Hallo,
hin und wieder passiert es bei mir, daß irgend ein Programm /tmp
auf 755 setzt, was dann dazu führt, daß sich kein normaler Benutzer mehr
einloggen kann.
Wie kann ich den Bösewicht ermitteln bzw. wie kann ich das generell
verhindern?
Danke für alle Hinweise und Tips.
Ciao
Peter Schütt
Hello there,
I am having an issue recording with a Griffin iMic (using arecord), that
issue being it doesn't work at all. Here is my sound setup:
List of CAPTURE Hardware Devices
card 0: rev50 [VIA 82C686A/B rev50], device 0: VIA 82C686A/B rev50 [VIA
82C686A/B rev50]
Subdevices: 1/1
S
I've finally got an Audigy 1 card, which does hw mixing... bye bye
dmix/dsnoop and oss app problems!
I installed the ld10k1 and qlo10k1 utilities (1.0.10) and loaded the
init_audigy script. Reading the doc files I've found a dump which adjust
the mixer with mute controls.
Does anyone know what
hi folks,
am wanting to setup the above "card" and am guessing that, following the
instructions for the soundblaster MP3 should suffice?, is this correct
or is the card not supported.
---
This SF.net email is sponsored by: Splunk Inc. Do y
On Thu, 16 Feb 2006 18:30:25 -0600
David Slimp <[EMAIL PROTECTED]> wrote:
> HA!Thanks. :)
> I think I tried just about EVERY other binary in that package other
> than that one!
>
> However, now it's failing due to overruns, and telling me to pick
> a bigger buffer (which I now have tried up t
Hi David,
thanks for your help. But I kind of doub that this is the problem.
In both cases (on my laptop and on my PC) behave the same way in
alsamixer.
Q/Z increase/decrease the left channel volume
E/C increase/decrease the right channel volume
W/X increase/decrease both channel volumes at once
Hi list,
I've 2 machines with (quite) the same setup; one had an electrical shock
which
killed the on-board sound card (both have a via82xx embedded soundcard),
so I
deactivated it and plugged a CMI8738 in a PCI slot.
On the 1st (on-board sound), I've got ALSA mixers in gnome
(gnome-volume-c
Well, I'm not familiar with the amixer output, so perhaps someone else
can give a better answer... however, my FIRST thoughts are:
1) I don't know of any single microphones that are stereo, after all
it's a single mic (input).. how would you be getting two different sounds?
2) Just because a signal
I'm trying to record some input on my Delta 1010LT using jackrec,
but it needs a "port".
There are no docs, and google doesn't turn up anything either.
I've tried: output1 output_1, playback_1, 1, in1, in_1, capture_1
When I run qjackctl, I see input/output connection ports such as
capture_1, p
HA!Thanks. :)
I think I tried just about EVERY other binary in that package other
than that one!
However, now it's failing due to overruns, and telling me to pick
a bigger buffer (which I now have tried up to "-B 128000").
Actually, all I want to do is record about 6 hours of spoken word
audi
30 matches
Mail list logo
