Lee Revell wrote:
> You are mixing up period_time (which is in microseconds) with
> period_size (which is in frames). period_time defaults to 125000.
>
> Why do you want to use an .asoundrc at all?
>
I want to set period size or time to a value so that the buffer is 16kb
- because that's what
Anyone know where to find a "whitepaper" or similar document on the
Ensoniq 5880? It is a PCI-based soundcard (yes, I know that Ensoniq was
acquired by Creative Technologies in 1997). Their site only says that
it is a "discontinued product", and as a result does not have anything
available on
In my case,
alsamixer shows Intel 82801DB-ICH4 uses Analog Devices AD1981B as AC'97 Codec.
Chip spec may serve as a reference.
http://www.analog.com/en/prod/0,2877,AD1981B,00.html
It uses two ADC circits , which can be shown as ADC and ADC2 in the
'/proc/asound/pcm'
And have one SPDIF port.
What
Hi,
I also use this Intel ICH4 on thinkpad R50e,
I'm not sure about the reason why these 4 pcm interface is prepared by Alsa.
I use plughw:0,0 for playback.
plughw:0,0 and :0,3 for capture, so we can use 0 & 3 as duplex.
alsa shows below.
$cat /proc/asound/pcm
00-00: Intel ICH : Intel 82801DB-I
On Thu, 2006-09-21 at 03:24 +0200, Tomas Carnecky wrote:
> Without a .asoundrc, alsaplayer gives this: PERIOD_TIME: (21333 21334)
> I can play several sounds at the same time through dmix.
>
> But, with a .asounrc that has the following:
>
> cards.ICE1724.pcm.dmix.period_time 1024
>
> (note that
Without a .asoundrc, alsaplayer gives this: PERIOD_TIME: (21333 21334)
I can play several sounds at the same time through dmix.
But, with a .asounrc that has the following:
cards.ICE1724.pcm.dmix.period_time 1024
(note that 1024 is the default value for dmix, so that shouldn't change
anything),
On Wed, 2006-09-20 at 22:04 +0100, Mario Rossi wrote:
> Thanks for your answer, but I don't know much about digital audio component.
> On my laptop there are
>
> 1) integrated MIC (is it MIC1?)
> 2) integrated speakers
> 3) port for external MIC (is it MIC2?)
> 4) port for external speakers
>
> I
Hi guys,
I realy need help, I use SB Audigy LS for broacasting live Radio and it was
sounding realy bad, with a loud HISS and then I decided to try out the OSS
driver. It sounds great but chops the signal frequently. I need to find a good
sound card for recording over linux, I`m starting to thin
Thanks for your answer, but I don't know much about digital audio component.
On my laptop there are
1) integrated MIC (is it MIC1?)
2) integrated speakers
3) port for external MIC (is it MIC2?)
4) port for external speakers
I've tried to record and play through the devices to guess what they
corr
Takashi Iwai <[EMAIL PROTECTED]> writes:
> Well, you've seen the xrun detection there, so it's basically the
> problem of other parts, such as disk contoller driver. That is,
> something else takes too long time, and the irq for sound can't be
> handled at the right time.
Another question: shoul
Lee,
> On Tue, 2006-09-19 at 14:48 -0700, Jose Gilberto Torres wrote:
> > aplay -D hw:1,0 ~/GNUstep/Library/WindowMaker/Sounds/unhide.wav
> > Playing WAVE
> > '/home/torresj/GNUstep/Library/WindowMaker/Sounds/unhide.wav' :
> > Unsigned
> > 8 bit, Rate 22050 Hz, Mono
> > aplay: set_params:901: Sam
Hello anybody!
I'm looking for a driver for my emagic emi2|6. I read that it has been
removed from the 2.6.x kernel on debian.
Where are the offcial sources for this driver and how can i install it
on debian sarge? I'm using kernel 2.6.8-3-686.
Any help would be much appreciated.
Till
---
At Wed, 20 Sep 2006 16:35:35 +0200,
Dominique Dumont wrote:
>
> Takashi Iwai <[EMAIL PROTECTED]> writes:
>
> > Well, you've seen the xrun detection there, so it's basically the
> > problem of other parts, such as disk contoller driver. That is,
> > something else takes too long time, and the irq
Lee Revell <[EMAIL PROTECTED]> writes:
> Does this help?
>
> # echo 64 > /sys/block/hdc/queue/max_sectors_kb
> Replace hdc with sda or whatever the kernel calls your disk and repeat
> for all disks.
No change.
> It's still a bug IMHO if this is needed, but might make your system
> usable
Takashi Iwai <[EMAIL PROTECTED]> writes:
> Well, you've seen the xrun detection there, so it's basically the
> problem of other parts, such as disk contoller driver. That is,
> something else takes too long time, and the irq for sound can't be
> handled at the right time.
ok. But then, why is th
Hi,
I have 2 simple questions:
How can I send the sound to analog and digital output at the same
time? Both apart are working.
And second: is it possible to upmix normal stereo to ac3? I have a
receiver connected to my soundcard.
Thanks,
Wouter
On Mon, 2006-18-09 at 12:38 +0200, Clemens Ladisch wrote:
> Robert Persson wrote:
> > I've been having great difficulty making linux correctly choose the
> > default sound card when it boots. I have a via thingy on the motherboard
> > and a SB Live in a pci slot. I want the SB Live to be the defaul
On 9/20/06, Clemens Ladisch <[EMAIL PROTECTED]> wrote:
> kyle cronan wrote:
> > Jjust wondering if someone can enlighten me on an unusual debugging
> > experience... I use iec958 to output to some speakers that are at a
> > set volume, so I painstakingly created this asound.conf file to make
> > th
kyle cronan wrote:
> Jjust wondering if someone can enlighten me on an unusual debugging
> experience... I use iec958 to output to some speakers that are at a
> set volume, so I painstakingly created this asound.conf file to make
> things work just right:
> ...
Your asound.conf doesn't mention an
Hello everyone,
Jjust wondering if someone can enlighten me on an unusual debugging
experience... I use iec958 to output to some speakers that are at a
set volume, so I painstakingly created this asound.conf file to make
things work just right:
pcm.!default {
type softvol
slave {
20 matches
Mail list logo
