Hi!
Can anybody confirm, RME HDSP 9632 (with current driver, hdspconf and
hdspmixer) *does* work in slave mode with getting sync clock via SPDIF input
(both coaxial and optical)? Are there any demands to such sync signal? Is
silent spdif stream sufficient?
Thanks!
Andrew
=== On Monday 02 July 2007, Chris Smith wrote: ===
> On Wednesday 02 May 2007, Andrew Gaydenko wrote:
> > What is the current state of 'hdsp' alsa driver? Does it still require
> > to downgrade RME HDSP 9632 firmware to v.1.51 (as I have found while
> > goo
=== On Sunday 01 July 2007, Chris Smith wrote: ===
> Changes in alsa-kernel/pci/rme9652/hdsp.c for the 1.0.14 release break the
> RME
> HDSP 9632 (and alsa all together once the module loads).
For me the driver works for the same card on amd64 platform (Core 2 Duo). The
card (hex) firmwa
Don't take in mind - LAU list helped: snd_virmidi ALSA kernel module was needed.
=== On Tuesday 12 June 2007, Andrew Gaydenko wrote: ===
> Hi!
>
> I have tried this Java app http://www.cs.hmc.edu/~keller/jazz/improvisor/
> with Sun's jdk 5 and 6, and have tried to
Hi!
I have tried this Java app http://www.cs.hmc.edu/~keller/jazz/improvisor/
with Sun's jdk 5 and 6, and have tried to find app's MIDI ports on qjackctl's
MIDI tab, but without success. 'hdsp' alsa driver is in use for RME HDSP9632,
and the card's MIDI ports are visible. Tha app's preferences dia
=== On Wednesday 09 May 2007, you wrote: ===
>
> Maybe another application is blocking the sound card? I don't think
> ALSA enables dmix for that device by default.
>
> Lee
Lee,
'aplay', 'mpd', 'aqualung' work fine, and, of course, JACK works
fine also. The problem takes place with '
=== On Wednesday 09 May 2007, James Courtier-Dutton wrote: ===
> Andrew Gaydenko wrote:
> > Hi!
> >
> > Do I understand well, xine strongly demands a mixer alsa-control from
> > alsa? And at case such control doesn't exist (say, for 'hdsp' alsa d
=== On Wednesday 09 May 2007, you wrote: ===
> Hallo,
> Andrew Gaydenko hat gesagt: // Andrew Gaydenko wrote:
>
> > Do I understand well, xine strongly demands a mixer alsa-control from
> > alsa? And at case such control doesn't exist (say, for 'hdsp'
=== On Wednesday 09 May 2007, you wrote: ===
> On Tue, 8 May 2007 21:53:06 +0400
> Andrew Gaydenko <[EMAIL PROTECTED]> wrote:
>
> > Hi!
> >
> > Do I understand well, xine strongly demands a mixer alsa-control from
> > alsa? And at case such cont
Hi!
Do I understand well, xine strongly demands a mixer alsa-control from
alsa? And at case such control doesn't exist (say, for 'hdsp' alsa driver),
xine is unusable with alsa. Is it so?
-
This SF.net email is sponsored by D
Hi!
What is the current state of 'hdsp' alsa driver? Does it still require
to downgrade RME HDSP 9632 firmware to v.1.51 (as I have found while
googling)?
Andrew
-
This SF.net email is sponsored by DB2 Express
Download DB2
Marc,
For me (I use ICE1724 driver for Terratec Aureon 7.1 Space) this
command works with digital (optic) input:
arecord -r 44100 -c 2 -f S16_LE -D plug:iec958 file.wav
=== On Wednesday 08 November 2006 15:59, Marc Haber wrote: ===
Hi again,
On Sat, Nov 04, 2006 at 11:31:10AM +0100, Mar
Udo,
It seems like this way all works OK:
arecord -D plug:iec958 -r 44100 -c 2 -f S16_LE out.wav
aplay -D plug:spdif test.wav
I have used toslink loopback for testing. The thing is SPDIF-out
seems to be truncated to 16 bit (see ALSA bug 1592). For testing
I have used zero-padded ~5 sec signal o
Udo,
Thanks! - will try.
Andrew
=== On Saturday 04 November 2006 21:51, you wrote: ===
arecord -Dplughw:0,1 blabla
or something like that?
-
Using Tomcat but need to do more? Need to support web services, security
Udo,
How to address to this device (card 0, device 1) in 'plughw:x' syntax?
Andrew
=== On Saturday 04 November 2006 12:29, you wrote: ===
...
> card 0: T71Space [Terratec Aureon 7.1-Space], device 1: IEC1724 IEC958
> [IEC1724 IEC958]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
Udo,
I don't know wich 'x' must be for SPDIF input. 'aplay -l' out is:
List of PLAYBACK Hardware Devices
card 0: T71Space [Terratec Aureon 7.1-Space], device 0: ICE1724 [ICE1724]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: T71Space [Terratec Aureon 7.1-Space], device 1: IEC17
Hi!
The aim is very simple: to record 44100/16/2 SPDIF stream from an external
source with
bit-to-bit accuracy. The thing is I have not found a way to force ALSA iec958
device
to work at 16 bit depth (32 bit depth works with JACK and arecord).
If there *is not* a way to work at 16 bit depth, is
Jaroslav,
Inversion works. BTW, I have tried 'inv' LADSPA plugin (as ALSA
device) - it works too.
(Is it sufficient to perform futher tests with hw:0,1 only?)
Andrew
=== On Thursday 05 October 2006 17:58, you wrote: ===
Okay, what about route plugin:
pcm.routetest {
type rout
Sorry, have fogot to mention I have checked both hw:0,0 and hw:0,1 devices
with the same result (using non-inverting external DAC at last case).
Andrew
-- Forwarded Message --
Jaroslav,
Have tried the script. With given sample a speaker cone moves from a listener
rather
towa
ative, of course.
Andrew
=== On Thursday 05 October 2006 16:32, you wrote: ===
On Thu, 5 Oct 2006, Andrew Gaydenko wrote:
> Jaroslav,
>
> I use (with JACK) 'hw:0,0' for analog output and 'hw:0,1' for SPDIF one.
Could you try a more "lowlevel" t
Jaroslav,
I use (with JACK) 'hw:0,0' for analog output and 'hw:0,1' for SPDIF one.
Andrew
=== On Thursday 05 October 2006 15:39, you wrote: ===
On Tue, 3 Oct 2006, Andrew Gaydenko wrote:
> I use ICE1724 ALSA driver for Terratec Aureon 7.1 Space card. Almost
&g
James,
Thanks! I'm happy you have found a minute to devote to the problem :-)
'lspci -vnn | grep 0401' output is:
02:02.0 0401: 1412:1724 (rev 01)
As for a DAC in use, I didn't understand the question reason: the problem exists
for *both* line and spdif outputs. At any case, I must answer :-) C
Sergei,
You are right, "as binary signal value increases analog output
value decreases". As for reference, I'm an audio DIY-er, almost all
signal chain is made by my hand :-)
LADSPA is a more high level. ALSA driver configuring is much more
appreciated.
Andrew
=== On Tuesday 03 October 200
Bill,
I'll be happy to avoid an audiophile dispute :-) The problem is technical,
I use a sound card for measurement purposes.
Andrew
=== On Tuesday 03 October 2006 06:23, you wrote: ===
But this is inaudible, or you could just wire your speakers backwards.
How do you know that the sign
Bill,
"Inverted" means ... inverted :-) In another words, signal is
multiplied by -1.
Andrew
=== On Tuesday 03 October 2006 06:12, you wrote: ===
What do you mean by "inverted?
-
Take Surveys. Earn Cash. Influence
I use ICE1724 ALSA driver for Terratec Aureon 7.1 Space card. Almost
all is fine, big thanks to developers! Nevertheless, I have noticed
both default (line out) and plug:spdif devices'es outputs are inverted.
Is it possible to configure additional inversion and, as a result, to
get "normal" output
=== On Tuesday 09 May 2006 12:20, Christoph Anton Mitterer wrote: ===
Andrew Gaydenko wrote:
> I use Aureon 7.1 Space during long period. The only problem I have, I did not
> found
> the way to have simultaneous playing back for line out _and_ SPDIF out.
Ah,.. but this shouln&#x
=== On Sunday 07 May 2006 17:11, Christoph Anton Mitterer wrote: ===
Hi.
Additionally to my problems with the onboard sound chip that I've reported in
another post,.. I'm think about buying a 2nd soundcard for my computer an afaik
the TerraTec Aureon 7.1 soundcards are very good cards.
Ac
Has anybody experience with this sound card?
I'm interested in playing back only.
Andrew
---
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searc
ve turned all my DAC sliders to the max, enabled everything
concerncing IEC958 output, and user all H/W (there are five of them,
i don't know exactly what they do) options for PCM out.. but still no
sound
From: Andrew Gaydenko <[EMAIL PROTECTED]>
To: alsa-user@lists.sourceforge.net
S
Does simple 'aplay -Dplug:spdif foo.wav' work?
=== On Friday 30 December 2005 13:36, Pieter-Jan Malfait wrote: ===
hello,
i'm trying to get all my sound throught the SP/DIF (coax) output of my
card. i'm using the latest development drivers (1.0.11rc1) because it
is the only version that
== On Thursday 29 December 2005 00:40, you wrote: ===
On Wed, 2005-12-28 at 23:45 +0300, Andrew Gaydenko wrote:
> Robert,
>
> You are not alone, join here:
>
> https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1451
The last comment from tiwai was "it's not directly pos
seem to be working at all with ALSA 1.0.10.
Andrew Gaydenko wrote:
> Robert,
>
> You are not alone, join here:
>
> https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1451
>
> Andrew
>
> === On Wednesday 28 December 2005 23:23, Robert Hancock wrote: ===
> ...
Robert,
You are not alone, join here:
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1451
Andrew
=== On Wednesday 28 December 2005 23:23, Robert Hancock wrote: ===
...
Can anyone tell me either a) at least how to get some output on SPDIF or
b) better yet how to get things set u
Is it possible to configure ALSA oss emulation for playing
back routing from /dev/dsp to spdif device?
---
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo techno
Dave,
I have Terratec Aureon 7.1 Space (it was $111 for me). It has ALSA support (ice1724
driver).
The card has 4 stereo outputs (one of them has phone aplifier), or, if you want, 8
independant
analogue outputs. Attention: it seems (for me, at least :-), the card has 2 ADCs only.
The card is 24/
Hi,
I have installed 1.0.2c driver for Terratec Aureon 7.1 Space (ice1724).
Now, the aim is to play DVD with 24bit-96k sound. What configuration
steps must I do? Which player can do this job?
I have tried MPlayer (pre 2) with command "mplayer -srate 96000 /dev/scd1",
and have got "Too many audio
only way to change
a soundcard. Will you be so kind to tell me, which (low price) cards are well
supported with ALSA (I nead 24/96 stereo recording/playing only)?
Andrew
=== On Thursday 05 February 2004 18:42, you wrote: ===
On Thu, 5 Feb 2004, Andrew Gaydenko wrote:
> It&#x
: ===
On Thu, 5 Feb 2004, Andrew Gaydenko wrote:
> It's sad :-(
>
> Has anybody some info about development team plans at this direction? Must I address
> the issue to the alsa-devel list? I see anothe parallel thread in the alsa-user list,
> where Takashi Iwai "modifie
It's sad :-(
Has anybody some info about development team plans at this direction? Must I address
the issue to the alsa-devel list? I see anothe parallel thread in the alsa-user list,
where Takashi Iwai "modified the (emu10k1) driver on CVS". Does it mean, Takashi can
clarify my audio-future? :-)
Hi!
Has anybody any (may be indirect) information/links concerning playing 24/96 dvd
with Audigy2 ZS? I have installed 1.0.2 alsa with emu10k1 driver, but it seems,
the driver doesn't work with more than 16/48000. Am I wrong?
Andrew
---
The SF
41 matches
Mail list logo
