hwdep 16648 1 snd_hda_intel
snd64456 13
snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
Anything else that I can provide, I would be more than happy to...
--
Brett M. Wil
it working. =)
Brett
-Original Message-
From: stan [mailto:[EMAIL PROTECTED]
Sent: Friday, May 30, 2008 18:31
To: Brett Andrews
Cc: alsa-user@lists.sourceforge.net
Subject: Re: [Alsa-user] raw spdif frame capture
Brett Andrews wrote:
> Hi:
>
> I would like to perform raw sp
the driver would need to support it (windows driver does not,
they didn't know about the ALSA driver). Does the current emu10k1
driver support this? How would I enter this mode?
Thanks,
Brett Andrews
Software Engineer
BSE Reference Sof
n I go to watch a DVD. My mother board
says this is a C-Media chipset but the drivers MSI provides only work with
RedHat 7.1 or something. Has anyone else experienced this problem and
have any suggestions?
Thanks,
Brett
--
No virus found in this outgoing message.
Checked by A
to watch a DVD. My mother board says this is a C-Media chipset but the drivers MSI provides only work with RedHat
7.1 or something. Has anyone else experienced this problem and have any suggestions?
Thanks,
Brett
___
Alsa-user mailing
iver info but there isn't anything
there about it. I also checked the archives of the user and dev mail list
but didn't find anything.
Please point me in the right direction.
Thanks.
--
Brett I. Holcomb
---
This SF.net email is sp
I installed Alsa 1.0.4 on my Gentoo system. Alsa 1.0.3 has been working
well and worked last weekend. Tonight alsaplayer will not give any
sound - it goes through the motions of playing. Aplay gives this error
below. Why do I suddenly get this error and how can I fix it?
Playing WAVE '/opt
> Brett wrote:
> > Ok running snddevices made the /dev/snd/seq device but still no midi
> > sound.
> > I don't seem to have a midi ports.
>
> You have to give mpu_port and fm_port parameters to the module to get
> MIDI ports.
>
> Add this to your modul
> Subject: Re: [Alsa-user] Midi not working C-Media CM8738 (Mad Dog
> Predator card)
>
> Brett wrote:
> > I compiled ALSA 1.0.3 on my Red Hat 7.3 box last week (./configure
> > --with-cards=cmipci --with-sequencer=yes;make;make install). I cannot
> get
> >
24: [0- 0]: digital audio capture
1: : sequencer
33: : time
Everything else seems to be fine. Any help appreciated
Thanks
Brett
__
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.
http://ta
What exactly is dxs_support? I asked earlier and was
referred to a document that listed it but did not exlain
it.
Thanks.
On Mon, 15 Dec 2003 13:43:09 -0800
Mark Knecht <[EMAIL PROTECTED]> wrote:
On Mon, 2003-12-15 at 12:31, James McDonald wrote:
>
> First try to use dxs_support=1; if it doe
Has anyone had any experience with this card under Alsa?
Is it supported and does anyone know what chipset it is?
Thanks.
---
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
Thanks. I assume it's well supported in Alsa?
On Mon, 08 Dec 2003 15:53:32 -0500
Austin Acton <[EMAIL PROTECTED]> wrote:
On Mon, 2003-12-08 at 15:44, brett holcomb wrote:
What sound cards are used by the people on this list -
especially the developers . I currently have a
Turtle
What sound cards are used by the people on this list -
especially the developers . I currently have a Turtle
Beach Santa Cruz and want to upgrade. I have been looking
at cards like the Midiman Delta 44 or others in it's class
but I'm concerned about support for it and others like it
in Alsa.
I assume you tried all the buttons on alsa-mixer to see if it got changed.
Does that card support ac97?
On Sunday 07 December 2003 13:36, Ben Ford wrote:
> Ben Ford wrote:
> > I have a cheap SB128. In Windows XP, the mixer control is barely one
> > pixel off zero and it is loud enough to shake
So simple! Thank you. I've got to start remembering about /proc!
Thank you.
On Sunday 07 December 2003 20:55, Luca Capello wrote:
> Hello,
>
> on 12/08/03 02:46, Brett I. Holcomb wrote:
> | Using the bash shell commands or an Alsa utility how can I determine what
>
Using the bash shell commands or an Alsa utility how can I determine what
version of Alsa is installed?
Thanks.
---
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you
ll go through and see what
> > it is.
> >
> > How do I compile with the old library? Can I install the 0.9.8 lib as
> > well as 1.0 libs and if so how do I tell my apps to use 0.9.8?
> >
> > On Saturday 06 December 2003 11:37, Brett I. Holcomb wrote:
> > &
I don't subscribe to the alsa-devel list so I'll go through and see what it
is.
How do I compile with the old library? Can I install the 0.9.8 lib as well
as 1.0 libs and if so how do I tell my apps to use 0.9.8?
On Saturday 06 December 2003 11:37, Brett I. Holcomb wrote:
> I do
I downloaded Winex-cvs 3.2 and tried to compile it after installing Alsa
1.0.0_rc2. It doesn't work. I'm including some error messages below which
are just a sample. The compile runs through several sound functions with the
same thing - too few arguments.
Note I've compiled winex just last w
As an update. The existing install of alsaplayer still works but I can't
compile it anymore. I haven't tried any other apps.
Also, Quake2 sound now works fine. I didn't have to mess with any files in
/proc either.
On Wednesday 03 December 2003 22:46, Brett I. Holcomb wrote
I installed 1.0.0_rc1 tonight and went to build alsaplayer. I get these
messages and the build fails. Any ideas what's broken here and how to fix it?
Thanks.
alsa.c:30: parse error before "pinfo"
alsa.c:30: warning: type defaults to `int' in declaration of `pinfo'
alsa.c:30: warning: data def
YES! YES! YES! . This has been driving me crazy
getting my card setup. I'd like to know what features I
have available, what the actual entries are for the option
line to enable them and what they do. Unfortunately, many
cards assume you're running windows and will use the
provided software
y way to really find out what is happening is check the entire
source code tree!
On Sunday 30 November 2003 22:10, Mark Knecht wrote:
> On Sun, 2003-11-30 at 19:06, Brett I. Holcomb wrote:
> > Okay, I'm getting closer. When run from a console I get the error
> > "cannot mma
Okay, I'm getting closer. When run from a console I get the error "cannot
mmap /dev/dsp". /dev/dsp does exit. Okay - I've read the OSS How to and
think that I need to add
options snd-pcm-oss dsp=0
to the modules.conf file.
Is this correct?
On Sunday 30 November
the volume settings up and turning them on - no luck.
Any ideas would be appreciated.
On Saturday 29 November 2003 22:16, Brett I. Holcomb wrote:
> I am running Alsa 0.9.8 version.
>
> I've run into a problem with Quake2 sound. I've had the system working
> before but had t
I have a Turtle Beach Santa Cruz card with a CS4297A chip. When I run a
mixer there are many controls such as 3D control, some IEC958s, two PCMs, two
CDs, and more. Where do I find out exactly what these all do? I've checked
the Alsa site but it doesn't have much - just generic install instru
I am running Alsa 0.9.8 version.
I've run into a problem with Quake2 sound. I've had the system working
before but had to reinstall. Now I get no sound in Quake2 (I installed
quake2-relnev) - it runs, just silently. I'm using alsa-drivers and
installed alsa-oss. Everything else works - CD,
The docs for my sound card (TB Santa Cruz) list several options (see below).
1. When I put them in the options snd-cs46xx statement how do I know what
string to use. The card document tells me id is for the ID string and
enable_midi is to enable midi support. What about the rest.
2. Also
What are the pros and cons of using the ALSA 0.9x output plugin for XMMS
vs using XMMS's open sound?
Thanks.
--
Brett I. Holcomb
---
This SF.NET email is sponsored by: Thawte.com - A 128-bit supercerts will
allow you to extend the hi
, but I get
> "alsamixer: command not found" from the Bash shell. The contents of the
> alsa-utils-0.9.0rc6/alsamixer dir are "alsamixer.1," "alsamixer.c,"
> "Makefile.am," "Makefile.in," and "README." Can anyone help me with thi
lsa-user mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/alsa-user
--
Brett I. Holcomb
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
Enterprise Edition + IBM + LinuxWorld = Something 2 See!
> http://www.vasoftware.com
> ___
> Alsa-user mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/alsa-user
--
Brett I. Holcomb
--
is sponsored by:
> SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
> http://www.vasoftware.com
> ___
> Alsa-user mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/alsa-user
--
Brett I
> Alsa-user mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/alsa-user
--
Brett I. Holcomb
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
Thanks. I'll check them out (I'm sure I put a cable in
but I'll double check). By CD playback volume - is
that the volume on the CD drive itself?
On Fri, 10 Jan 2003 09:36:16 +0100
typical reasons are:
- no audio cable is connected from CD to the card
- CD playback volume is too low, or CD p
Try XMMS.
On 09 Jan 2003 22:07:11 +0100
Stéphane Purnelle <[EMAIL PROTECTED]> wrote:
Hello,
I installed alsa.0.9rc6 and I search a cd-audio player
that use native
alsa.
I have AlsaPlayer but AlsaPlayer don't permit to select
track from cd.
Does anyone know a cd-player (same kscd) that play
I read through this excellent document and have my aliases
set correctly and the modules load (lsmod shows them). I
did dump the oss_mixer and sndstat files and they seemed
to show everything was okay.Since I can get XMMS to
play wav files but not CD - it appears to play (the timer
counts
Thanks. I'll look at it and learn.
On Thu, 09 Jan 2003 17:35:36 +0100
Takashi Iwai <[EMAIL PROTECTED]> wrote:
Hi,
I wrote a brief document to explain the OSS-emulation of
ALSA on the
kernel (the default mode). The original text file is
available on
alsa-kernel cvs tree (Documentation subdir
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
# Set this to the correct number of cards.
options snd major=116 cards_limit=1
### modules-update: e
--- Fenix <[EMAIL PROTECTED]> wrote:
> On Sun, 16 Dec 2001 18:59:13 -0800 (PST)
> Brett <[EMAIL PROTECTED]> wrote:
>
> > I have an fm801 card with the DT-0398 chip. I have done absolutely
> > everything imaginable (am now considering magic spells cause nothing
&
up on in the
digest(maybe this one won't either?)
Brett
__
Do You Yahoo!?
Check out Yahoo! Shopping and Yahoo! Auctions for all of
your unique holiday gifts! Buy at http://shopping.yahoo.com
or bid at http://auctions.yaho
which changed their address' and/or irqs and it never happened again. It
may be worth a shot.
Brett
(frustrated and unsuccessful alsa user wanna-be:)
> Subject: [Alsa-user] i8x0 soundcard plays too fast
>
> Hi,
> I have a Compaq EN running RH 7.1 with a 2.2.19 kernel. The sou
distro. kernel 2.4.2-2 and a Super Sound Origins PCI Diamond
DT-0398. I've tried practically everything and the module will not load.
Help!
Brett
__
Do You Yahoo!?
Buy the perfect holiday gifts at Yahoo! Shopping.
http:
ithout problems
(driver,lib,utils) I just cannot load this module. I'm using a Super Sound
Origins PCI diamond DT-0398 card in Red Hat 7.1 with the precompiled
2.4.2-2 kernel that came with it. Help please!!!
Brett
__
Do You Yahoo!?
Buy the perf
sndstat:
Sound Driver:3.8.1a-980706 (ALSA v0.9.0beta9 emulation code)
Config options: 0
Installed drivers:
Type 10: AlSA emulation
Card config:
--- no soundcards ---
Audio devices: NOT ENABLED IN CONFIG
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
7: sy
46 matches
Mail list logo