In a message dated: Wed, 22 Aug 2001 17:39:54 CDT
"Marc W. Mengel" said:
>I have a script that will rsh over to some list of nodes and make a
>disklist, and one to check your disklist and tell you if new filesystems
>have appeared, and suggest a new disklist. I can post them if
>anyone's inter
Mitch Collinsworth ha escrito:
> On Tue, 28 Aug 2001, wanadoo wrote:
>
> > driver: result time 3.503 from dumper0: FAILED 01-2 [taper port
> > open: Resource temporarily
> > unavailable]
> > driver: result time 123.497 from taper: TAPE-ERROR 00-1 [port
> > connect timeout]
>
> It sounds
grubble> [...] I'm desperately trying to figure out why I can't get an
grubble> HP Surestore 24x6i changer to work with freebsd. I've
grubble> exhausted all of my resources and mailing lists to no avail,
grubble> so I'm resorting to emailing you because of this message I
grubble> found in the ama
Hi all,
I just checked the FAQ-O-Matic and docs/, but couldn't find this answer.
(btw, looks like that fom needs some clean-up, there are a bunch of
empty "New Item" items in there).
I have a tape, and want to find out what's on it directly from
the tape. I know I've seen this answered some w
On Thu, 30 Aug 2001, Paul Lussier wrote:
> I just checked the FAQ-O-Matic and docs/, but couldn't find this answer.
> (btw, looks like that fom needs some clean-up, there are a bunch of
> empty "New Item" items in there).
Yes, it's getting to be a bit of a mess.
> I have a tape, and want to
[EMAIL PROTECTED] said:
> Was tar-1.13.17 a known troublemaker? In other words, are the backups
> currently on hand, made by tar-1.13.17 all trashed?
Yes it's a known troublemaker, and your backups may well be trashed.
1.13.17 created bad Amanda index files, so amrestore won't work correctly.
Unix Linux
Trying a "test" of amrecover.
using the command:
amrecover -C /Inside/ -s backup.x.net -t backup.x.net -d /dev/nst0
I am getting:
amrecover: Unexpected server end of file
Ok, that's fine, I think it's because I am not running a DNS server inside
the firewall and the 10.0.0
On Thu, 30 Aug 2001 at 10:40am, Paul Lussier wrote
> I just checked the FAQ-O-Matic and docs/, but couldn't find this answer.
> (btw, looks like that fom needs some clean-up, there are a bunch of
> empty "New Item" items in there).
>
> I have a tape, and want to find out what's on it directly fr
Why is amanda dumping the following directory at level 1 when the estimate
returns 0K?
setting up estimates for millennium:/shows/vsky/mn/mn065
setup_estimate: millennium:/shows/vsky/mn/mn065: command 0, options:
last_level 0 next_level0 6 level_days 0
getting estimates 0 (20) 1 (0) -1 (-
Gene Heskett sends Greetings to Joshua Baker-LePain;
JB> On Wed, 15 Aug 2001 at 3:51pm, Joshua Baker-LePain wrote
JB> Yeah, I did write that on Aug 15. And I *didn't* send it out
JB> again...
Yeah, I have a regular rash of old messages this morning. ???
Cheers, Gene
--
Gene Heskett, CE
If anyone can give me a clue as to what is going on, it would be greatly appreciated.
Help 1:
I have a Linux box running RedHat 7.1;
Linux sxgate 2.4.2-2smp #1 SMP Sun Apr 8 20:21:34 EDT 2001 i686 unknown
FilesystemSize Used Avail Use% Mounted on
/dev/sda5 13G 3.2G
i have been having some trouble with my tape drive.. and in turn, trouble
with amanda. what are some simple things i can do to test out my tape
drive? any time i try and write to a tape amanda says that there is no
tape or that its at the end of the tape.
ive got a sony ait-1 drive on a machine
Hi all:
I just added a new client to my amanda setup, and ran amcheck to make
sure it was working. It didn't. Instead, I got the following:
=
> amcheck DailySet1
Amanda Tape Server Host Check
-
Holding disk {dumpdisk}: {size} disk space available, using {othersi
Hi there.
Here's my situation:
I have sets of 4 tapes (one 24 Gb tape + three 2 Gb tapes) to backup my machines.
I'll have 4 runs per cycle corresponding to the 4 weeks of the month, meaning that i
want to have:
1st run (1st week) - full backup using 24 Gb tape
2nd run (2nd week) - incremental b
>It did end up being something that Bastille did ...
FYI, I don't know what "Bastille" is (not sure I want to), but just get
the general idea from your comments.
>... we finally determined that it had closed down anything that used UDP
>and dgrams.
Sheesh! That's kind of excessive. :-)
Mor
Hi John,
> amrecover -C /Inside/ -s backup.x.net -t backup.x.net -d /dev/nst0
... leads to...
> amrecover: Unexpected server end of file
This sounds like you have the "wait" flag set to "yes" for the amandaidx
service in /etc/xinetd.d/amandaidx. Try changing it to "no". (Or, if
your bo
Hi Everyone,
I have been using amanda to do backups to a tape drive for a while,
but we recently decided to start doing backups to a RAID system.
I downloaded amanda-242-tapeio from sourceforge, and the compile
and install went fine. The only problem is I can't get it to work...
Sorry for the le
* Brandon Amundson <[EMAIL PROTECTED]> (Fri, Aug 17, 2001 at 02:58:11PM -0400)
> First I want to say thanks to all of you who respond to email like mine.
>
> I am trying to test amrecover. when I run amrecover daily, I get the
> following error.
>
> AMRECOVER Version 2.4.2p2. Contacting server
* Eva Freer <[EMAIL PROTECTED]> (Mon, Aug 13, 2001 at 11:52:48AM -0400)
> Amanda Users:
>
> We have a highly subnetted configuration of Solaris 8 and 2.6 boxes, mostly
> E220R's. The subnets are connected via firewalls. Each subnet has its own
> Amanda server with an Exabyte Mammoth tape drive. W
On Thu, 30 Aug 2001 at 7:52pm, David Galveias wrote
> 1st run (1st week) - full backup using 24 Gb tape
> 2nd run (2nd week) - incremental backup using 2 Gb tape
> 3rd run (3rd week) - incremental backup using 2 Gb tape
> 4th run (4th week) - incremental backup using 2 Gb tape
>
> 1st run (1st we
>... The only problem is I can't get it to work...
The output you sent (which was just what was needed to start working on
this, btw -- thanks), all looks perfectly correct, with the one minor
issue that sendsize didn't do anything :-).
Put these two lines:
OPTIONS maxdumps=4;hostname=raid1;
John,
Bastille is a program distributed by www.bastille-linux.org to tighten the
security of Linux. It is now also distributed on the RedHat 7.1 CD's and is
one of the three recommended methods of tightening up a system that sits
outside the firewall on the Internet. If I get a chance, I'll try i
On Fri, Aug 31, 2001 at 11:21:52PM -0500, John R. Jackson wrote:
>
> >amrecover> history
>
> How many lines are in your tapelist file?
That's exactly what it turned out to be. 8-) Not enough lines
in tapelist, because I hadn't set tapespercycle large enough. I wanted
a hundred tape recy
>> How many lines are in your tapelist file?
>
> That's exactly what it turned out to be. ...
Yeah, sorry about that. I was cleaning up two weeks worth of E-mail
and didn't notice you had already worked out this part of the problem.
> So, adding them to tapelist got me up to four w
Hello Amanda People,
I'm running amanda with a five-tape DLT changer, and everything seems to
work just beautifully so far (well, after I spent two hours trying to
label a cleaning tape at least ;). However, I do have some questions
regarding how to use the tapes, or how to arrange them in "tap
25 matches
Mail list logo