For RedHat 9
Try the following command as root
chkconfig amanda on
The client aspect of amanda (run via xinetd) is disabled by default!
The above command turns it on. If that fails then check to see if it
works after you issue the command
service iptables stop
In which case it
>Amanda can use multiple tapes in one amdump, but it can't span a single
>image across multiple tapes. You'll have to divide up that image, using
>tar to grab subdirectories rather than the whole FS.
I suppose dividing the image using tar actually means putting different
entries for each dire
unsubscribe
On Thu, Jun 26, 2003 at 08:20:29AM +, Lucio.yahoo wrote:
> > You should get an e-mail with error messages and statistics.
>
> Here is the mail I receive (mailto "root"), but, to be honest, it doesn't help
> me very much...
>
Yes, the mail is not very helpful for a newbie.
OTOH i cannot offe
> For RedHat 9
> Try the following command as root
>
> chkconfig amanda on
I've edited /etc/xinetd.d/amanda by hand instead, then I restarted xinetd.
Now the problem is:
planner: ERROR localhost: [access as amanda not allowed from
[EMAIL PROTECTED] amandahostsauth failed
Note that amanda had
>Pay special attention to typos in inetd.conf;
I've edited /etc/xinetd.d/amanda, then I restarted xinetd. Now
the problem is:
planner: ERROR localhost: [access as amanda not allowed from [EMAIL PROTECTED]
amandahostsauth failed
Note that amanda had been running as root for a while yest
Alexander JOLK wrote:
NOTES:
taper: tape met053 kb 17996640 fm 21 writing file: No space left on device
taper: retrying localhost:/home/samba/projekte/Laufende.0 on new tape:
[writing file: No space left on device]
taper: tape met055 kb 17488544 fm 1 writing file: Input/output error
taper: retryin
Susanne und Stefan Noll wrote:
taper: tape met053 kb 17996640 fm 21 writing file: No space left on
device
Here you hit into EOT. Could be that you have indeed hardware
and software compression at the same time. See below.
taper: retrying localhost:/home/samba/projekte/Laufende.0 on new tape:
[wri
On Thursday 26 June 2003 04:20, Lucio.yahoo wrote:
>> You should get an e-mail with error messages and statistics.
>
>Here is the mail I receive (mailto "root"), but, to be honest, it
> doesn't help me very much...
>
>From [EMAIL PROTECTED] Thu Jun 26 08:11:16 2003
>Date: Thu, 26 Jun 2003 08:11:15
Frank Smith wrote:
--On Tuesday, June 17, 2003 10:01:23 +0200 Stefan Noll <[EMAIL PROTECTED]> wrote:
hi,
4 months ago I installed amanda 2.4.2p and it worked fine.
but now I get following strange error:
FAILURE AND STRANGE DUMP SUMMARY:
localhost /home/samba/projekte/Laufende lev 0 FAILED [
On Thursday 26 June 2003 05:13, Susanne und Stefan Noll wrote:
>Alexander JOLK wrote:
>>>NOTES:
>>>taper: tape met053 kb 17996640 fm 21 writing file: No space left
>>> on device taper: retrying
>>> localhost:/home/samba/projekte/Laufende.0 on new tape: [writing
>>> file: No space left on device]
>>
Hi,
two things:
1.) never use localhost in a disklist entry, it will come back and bite
you later
always use the full name of the host.
2.) in the homedirectory of the amanda-user create a file ".amandahosts"
owned by the amanda user and
with permisions 0600, containing at least the line:
fm
On Thursday 26 June 2003 06:27, Lucio.yahoo, (by way of Lucio.yahoo
wrote:
>> For RedHat 9
>> Try the following command as root
>>
>> chkconfig amanda on
>
>I've edited /etc/xinetd.d/amanda by hand instead, then I restarted
> xinetd. Now the problem is:
>
>planner: ERROR localhost: [access as ama
Gene Heskett wrote:
That file should exist in /home/"amanda-user"/.amandahosts, and look
something like this:
---
FQDN amanda
FQDN root
---
Where my amanda-user is amanda. And I'm not sure if the second line
is needed at all. FQDN is the servers full name of course. Th
siparişleriniz için;
Next Step
Add the following line in the file ~amanda/.amandahosts
(/var/lib/amanda/.amandahosts)
fmserver amanda
The file should already have entries for
localhost amanda
localhost.localdomain amanda
If not please add them.
> >Pay special attention to typos in inetd.conf;
>
> I've edi
> > can anyone advise me how to determine the block size of this tape?
>
> mt -f /dev/... status
>
> reports the blocksize that the device is configured (not that tape
> that is in it).
>
> If you read a tape, specify a blocksize larger than then one on
> tape (maybe it has to be an exact multiple
Hi!
My setup looks like this:
I have 5 tapes, and I would like to do a backup every working day
(monday to friday), therefor my amanda.conf looks like:
dumpcycle 5
runspercycle 5
tapecycle 5 tapes
Is that right??
Next I would like Amanda to do a full dump every day therefor I have put
"dumpcycle
> Hi,
>
> Trying to label a set of 6 tapes in a DDS4 autoloader. For some reason
after
> i load the first tape into the slot and try and do a amlabel the tape is
> unloaded and another one loaded into the slot instead. See below.
>
> Any idea why this might be?
>
> Tom
>
> $ mtx -f /dev/sg2 status
Title: Eservis.gen.tr Sanal reklam Merkezi , E-mail List
Kendi
Reklamınızı Kendiniz Yapın!
Düşük
maliyet ve sınırsız kullanım...
KONTROLÜ
ELİNİZE ALIN..!
E-mail
gönderemiyorum problemlerine s
On Thursday 26 June 2003 06:39, Paul Bijnens wrote:
>Gene Heskett wrote:
>> That file should exist in /home/"amanda-user"/.amandahosts, and
>> look something like this:
>> ---
>> FQDN amanda
>> FQDN root
>> ---
>> Where my amanda-user is amanda. And I'm not sure if the seco
On Thursday 26 June 2003 06:51, Onime Clement wrote:
>Next Step
>Add the following line in the file ~amanda/.amandahosts
>(/var/lib/amanda/.amandahosts)
>
>fmserver amanda
>
>The file should already have entries for
>localhost amanda
>localhost.localdomain amanda
>
>If not please add them.
>
>> >
On Thu, 26 Jun 2003 at 12:14pm, Vijay wrote
> >Amanda can use multiple tapes in one amdump, but it can't span a single
> >image across multiple tapes. You'll have to divide up that image, using
> >tar to grab subdirectories rather than the whole FS.
>
> I suppose dividing the image using tar a
Hi Jon,
>
> 1. you are writing to a dds2 tape, 3.8GB max size, and /dev/sdc2 is more
> than 4 GB, even compressed.
it's a dds4 tape, you know, 20Gb and 40Gb compressed. My backups aren't greater than
6Gb totally ( when full dump ). these indications aren't normal , the tape must to
have more t
On Thu, 26 Jun 2003 at 3:10pm, Raúl Wild-Spain wrote
> Unusual System Events
> =-=-=-=-=-=-=-=-=-=-=
> Jun 24 03:06:06 xaloc kernel: st0: Error with sense data: Current st09:00: sense key
> Medium Error
> Jun 24 03:06:06 xaloc kernel: Additional sense indicates Excessive write errors
> Jun 24 03:
I'm trying to run amplot and get the following error message:
/var/amanda/test/logs$ amplot amdump.1
Displaying graph on the screen, for next graph
cat: cannot open amdump.1
: MISSING SPACE DECLARATION
gnuplot> load 'title'
^
Cannot open load file 'title'
"/opt/a
Ean Kingston wrote:
I'm trying to run amplot and get the following error message:
/var/amanda/test/logs$ amplot amdump.1
Displaying graph on the screen, for next graph
cat: cannot open amdump.1
Is there a file "amdump.1"? and is it readable by the user running
amplot? "ls -lL amdump.1" -- "c
1. Is it possible to force amanda to use one tape --
writing to it in
a contiguious manner (i.e., not overwriting it every
dump)?
2. As I am quite new to AMANDA in general I would
greatly appreciate
any suggestions one could provide in helping me
optimize my current
configuration. All of the setu
Title: Message
my email address when
i subscribed was [EMAIL PROTECTED] we
have since been taken over and my new address is [EMAIL PROTECTED] although old
address still fwds. So when I try to unsubscribe you tell me that i'm not on the
list because the address you're seeing is [EMAIL PROTEC
On Thu, 26 Jun 2003 at 11:43am, Gowen, Siobhan wrote
> my email address when i subscribed was [EMAIL PROTECTED] we have since
> been taken over and my new address is [EMAIL PROTECTED] although
> old address still fwds. So when I try to unsubscribe you tell me that
> i'm not on the list because the
> The last thing is that I dont wont Amanda to look at the label of tape,
> if there is a tape in the drive it should do the backup no matter what -
> How do I tell Amanda that??
amlabel -f DailySet1 anylabel
Put this in your crontab so that it gets executed just a few minutes before
the amdump
Thanks to everybody for your patience, now it works. The problem was
precisely the .amandahosts file.
Special thanks to Paul Bijnens for being the first to point out the real
problem.
Can someone give me the tapetype entry for VXA-2?
Thanks,
Steve
This is what works for us.
define tapetype VXA {
comment "Exabyte VXA-2 V17"
length 30609 mbytes
filemark 2141 kbytes
speed 3892 kbytes
}
Joe Benson
IDI
Steven J. Backus wrote:
Can someone give me the tapetype entry for VXA-2?
Thanks,
Steve
This is the configuration I'm using for my VXA-2 tape type Exabyte V23.
define tapetype v23 { comment "V23 tape used with VXA-2" length 63917 mbytes filemark 3272 kbytes speed 3301 kps}
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
Lucio.yahoo wrote:
The last thing is that I dont wont Amanda to look at the label of tape,
if there is a tape in the drive it should do the backup no matter what -
How do I tell Amanda that??
amlabel -f DailySet1 anylabel
Put this in your crontab so that it gets executed just a few minutes befor
An AMANDA ebuild for Gentoo will be available shortly in portage. Yay!
Russell
- Forwarded message from [EMAIL PROTECTED] -
Date: Thu, 26 Jun 2003 12:51:09 -0700
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [Bug 19403] amanda-2.4.3.ebuild (New)
http://bugs.gentoo.org/show_bug.
>An AMANDA ebuild for Gentoo will be available shortly in portage. Yay!
You're one zassy frood who really knows where his towel's at.
And if you follow the link and read the bug text, it's 2.4.4, too! I know
what my Gentoo box is getting this weekend!
> -Original Message-
> From: Anthony A. D. Talltree [mailto:[EMAIL PROTECTED]
> Sent: Thursday, June 26, 2003 5:49 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [EMAIL PROTECTE
That's really funny after no sleep all night. ;] I think at this point
I'd even enjoy Vogon poetry.
Russell
On Thu, Jun 26, 2003 at 02:49:18PM -0700, Anthony A. D. Talltree wrote:
> >An AMANDA ebuild for Gentoo will be available shortly in portage. Yay!
>
> You're one zassy frood who really know
Oh yeah, I forgot to mention that.
Plus its good for rolling out to Gentoo clients. The gentoo guy kept
my xinetd configs for setting up amanda with a tapeserver, so you can
do:
# AMANDA_SERVER=mytapeserver.mydomain.com emerge amanda
Pretty easy. You'll need xinetd, and you'll need to restart xi
>That's really funny after no sleep all night. ;] I think at this point
>I'd even enjoy Vogon poetry.
M-X miss-point
I can make no sense whatsoever of this statement in the context of
AMANDA (or in any other):
"An AMANDA ebuild for Gentoo will be available shortly in portage. Yay!"
>And if you
42 matches
Mail list logo
