Lars Sørensen wrote:
And the weird thing is that the tape mentioned is in fact in the rack
and in the right place. I've tried starting with tape 5 in the drive
and watched as the tapechanger substituted that tape with tape 6 into
the drive and then producing the exact same error as above ? ? ?
Are there any tape errors in the system log?
I run into this type of problem when, somehow, the blocksize of the tape
drive is changed. Then amanda will run through the whole set of tapes
and reject them all while the system log shows "kernel: st0: Incorrect
block size." each time a tape is l
Have you tried:
amtape {config} show
to see if amanda thinks the tape label is correct ?
Scott...
Scott R. Burns
NETCON Technologies Inc.
Suite 135 - 4474 Blakie Road
London, Ontario, Canada
N6L 1G7
Voice: +1.519.652.0401
Fax: +1.519.652.9275
-Original Message-
From: [EMAIL PROTECTED]
I then ran kudzu -p
which gave me the following info on tape-device and changer:
class: OTHER
bus: SCSI
detached: 0
device: sg1
driver: ignore
desc: "Hp C7200"
host: 0
id: 14
channel: 0
lun: 0
generic: sg1
class: TAPE
bus: SCSI
detached: 0
device: st
driver: ignore
desc: "Hp Ultrium 1-SCSI"
host:
