anda (it seems to be
> 2.4.3b4) compiled from scratch with user amanda, group backup,
> samba support.
>
> I've succeeded in making some tar -backups on /dev/st0 by hand
>.
>Amanda requires a non rewinding tape, as I have read from the
> docs.
>
>
>How could I access
Hello Vlad,
On Mon, Sep 23, 2002 at 06:23:22PM +0200, Vlad Popa wrote:
> How could I access the tapedrive with amanda which is a rewinding device, not
> a non-rewinding ?
In my setup (a Debian 3.0 i386 system as yours), I use
tapedev "/dev/nst0"
> Could it be that
Yes, the rewinding and non-rewinding devices are the same physical
device. The naming conventions can vary between OSs, but generally
the device name with the 'n' is the non-rewinding device.
Frank
--On Monday, September 23, 2002 18:23:22 +0200 Vlad Popa <[EMAIL PROTECTED]> wrot
ackup, samba support.
I've succeeded in making some tar -backups on /dev/st0 by hand
.
Amanda requires a non rewinding tape, as I have read from the docs.
How could I access the tapedrive with amanda which is a rewinding device, not
a non-rewinding ?
Could it be that /dev/nst
Thanks everyone for the help. That really hit the spot.
Larry S. Brown MCSE
President/CEO
Dimension Networks, Inc.
Member ICCA
(727) 723-8388
On 12 Jun 2001 12:25:09 -0400, Larry Brown wrote:
> I have a single HP-T20i unit and am trying to run amlabel. Upon running
> amlabel I get
> rewinding, reading label, not an Amanda tape
> rewinding, writing label , checking label
> amlabel: no label found, are you sure
I have a single HP-T20i unit and am trying to run amlabel. Upon running
amlabel I get
rewinding, reading label, not an Amanda tape
rewinding, writing label , checking label
amlabel: no label found, are you sure /dev/st0 is non-rewinding?
Note that this tape was previously used by Tapeware and
>... It tells me to check my
>amanda.conf file to verify that the drive is "non-rewinding".
And did you?
Amanda **must** have a non-rewinding device. For Solaris, that means
you need the name with an 'n' in it, e.g. /dev/rmt/0mn (as compared with
just 0m).
>...
Title: non-rewinding?
Hi all,
I finally got my changer working with the stctl driver SCSI II (Exabyte 10H with EXB 8500 series drive/tapes). Running on Solaris 7 (sparc). My changer finally sees all the tapes in it and now I have moved on to the point where I begin to 'amlabel