I'll give it a try Matthias
Fred
> Op 20 mrt. 2019 om 20:04 heeft Matthias Trute het volgende
> geschreven:
>
> Am Mittwoch, den 20.03.2019, 18:31 +0100 schrieb Fred Zelders:
>> Hello Bruce
>>
>> Thank you for this information.
>>
>> But … could it be possible to use the primitives of the 1
Am Mittwoch, den 20.03.2019, 18:31 +0100 schrieb Fred Zelders:
> Hello Bruce
>
> Thank you for this information.
>
> But … could it be possible to use the primitives of the 1-wire
> protocol in order to start/trigger a measure sequence and to read a
> series of bits/bytes as a result of the meas
ty
>> Subject: [Amforth] 1-wire communication with DHT-11 connected to
>> Arduino Uno's PB4
>> Message-ID: <56b2aad2-18c0-4e1c-bca4-476576a9b...@gmail.com>
>> Content-Type: text/plain;charset=utf-8
>>
>> Using 1wire.frt I want to communicate
Hi,
Although a DHT-11 or 22 has one wire, it doesn’t speak the 1-wire protocol, so
it isn’t a 1-wire device.
Bruce
> Message: 1
> Date: Wed, 20 Mar 2019 13:21:46 +0100
> From: Fred Zelders
> To: AmForth Community
> Subject: [Amforth] 1-wire communication with DHT-
Using 1wire.frt I want to communicate with the DHT-11 that is used on the
'Open-Smart Rich Shield' and connected to pin PB4 (D12) of the Uno.
(https://www.aliexpress.com/item/Rich-Shield-IR-Remote-with-Infrared-Receiver-LED-Buzzer-Button-Light-Sensor-Temperature-Sensor-24C02-EEPROM/32843115907.htm
