From: "John E. Coleman (ARS WA5BXO)" <[EMAIL PROTECTED]>
The power that you run is determined by the load resistance that the
plate circuit is working into, and the voltage... If you maintain the
same voltage and loading position on the knobs,
therefore reflecting the same Z to t
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John E. Coleman (ARS
WA5BXO)
Sent: Wednesday, November 16, 2005 3:32 PM
To: 'Discussion of AM Radio'
Subject: RE: RE: [AMRadio] Re: Need list of good AM radios to start
lookingfor.
You are correct
ECTED] On Behalf Of Jim candela
> Sent: Wednesday, November 16, 2005 3:37 PM
> To: Discussion of AM Radio
> Subject: RE: RE: [AMRadio] Re: Need list of good AM radios to start
> lookingfor.
>
> John,
>
> If you go this route with a series dropping resistor, think
> abou
Cheers
John KB6SCO
PS: I'm going to try this, perhaps this weekend if I can get a
spare hour of bench-time on it.
John!!
Let us know how it goes! I also have a Ranger (or two) and that SB-200
-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jim candela
Sent: Wednesday, November 16, 2005 3:37 PM
To: Discussion of AM Radio
Subject: RE: RE: [AMRadio] Re: Need list of good AM radios to start
lookingfor.
John,
If you go this route with a series dropping resistor, think
: RE: RE: [AMRadio] Re: Need list of good AM radios to start
lookingfor.
On Wed, 16 Nov 2005, John E. Coleman (ARS WA5BXO) wrote:
>
> The best way is still to reduce the supply voltage at the
> plate/screen modulation point. A large resistor that has a bypass cap
> across i
.
Regards,
Jim
WD5JKO
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of John Lawson
Sent: Wednesday, November 16, 2005 3:22 PM
To: Discussion of AM Radio
Subject: RE: RE: [AMRadio] Re: Need list of good AM radios to start
lookingfor.
On Wed, 16 Nov 2005,
On Wed, 16 Nov 2005, John E. Coleman (ARS WA5BXO) wrote:
The best way is still to reduce the supply voltage at the
plate/screen modulation point. A large resistor that has a bypass cap
across it works well.
As has been wisely pointed out to me - in the case of the Ranger,
plac
EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jim candela
Sent: Wednesday, November 16, 2005 12:53 PM
To: Discussion of AM Radio
Subject: RE: RE: [AMRadio] Re: Need list of good AM radios to start
lookingfor .
Dan,
I like your suggestion. I never tried it, so I am no authority on
9 matches
Mail list logo