I don't have it, don't want it, don't want to hear about it.
Lets talk about the new satellites going up.
Tom K5VOU
On 11/13/2013 2:00 PM, amsat-bb-requ...@amsat.org wrote:
Send AMSAT-BB mailing list submissions to
amsat-bb@amsat.org
To subscribe or unsubscribe via the World Wide
Better bring your snow shoes :)
Tom K5VOU
--
Message: 1 Date: Tue, 25 Dec 2012 10:05:34 -0600 From: wyattdirks
wyattdi...@msn.com To: amsat-bb@amsat.org Subject: [amsat-bb] AC0RA/M
12/26/12 Message-ID:
Rubbish! I built my own antennae from wood and welding rod, cut my own
phasing lines and built a computer from scraps to run the tracker
software. I did have an AZ-EL motor set from the 80s but it had to have
the controller rebuilt and the case crack repaired. My old radio FT726
doesn't have
My name is Tom and my call is K5VOU. I am a life-member of AMSAT and the
ARRL as well as an Extra Class license holder. I have observed both
organizations at work from the inside both as a volunteer and a vendor.
My satellite ground station is an old Yaesu FT-726 and the antennas are
Mystery is solved. The Repeater offset switch MUST be in Simplex for
this to operate correctly.
73,
Tom K5VOU
On 8/2/2012 2:00 PM, amsat-bb-requ...@amsat.org wrote:
My Operators manual for the FT-726R instructs me to tune the receiver
while transmitting to the satellite in order to listen
On 8/2/2012 2:00 PM, amsat-bb-requ...@amsat.org wrote:
I had a 5500 azmith rotator lockup over winter. I finally had time to
take it down and find the problem. Now a different problem. I forgot to
mark the housing position before separating the upper/lower azmith
assemblies. I think I know where
Since I have referenced k5...@amsat.org as how to reach me, I discovered
that the alias is not working although it shows the correct destination
email in the system and such. k5...@arrl.net does work so please use
that one for now.
Anyone know if there is an issue with the system?
73,
Tom
Hi,
My Operators manual for the FT-726R instructs me to tune the receiver
while transmitting to the satellite in order to listen for my down
link. However on my 726, the RX tuning is locked while in transmit,
duplex or otherwise. Is there a mod necessary or is this a software
change made
On 7/30/2012 2:00 PM, amsat-bb-requ...@amsat.org wrote:
Message: 7
Date: Mon, 30 Jul 2012 07:41:07 -0700 (PDT)
From: Pete Norris, K1HZUk1...@yahoo.com
To:amsat-bb@amsat.org
Subject: [amsat-bb] yaesu G-5500
Message-ID:
1343659267.81494.yahoomailclas...@web120001.mail.ne1.yahoo.com
This BBS is a joy to read and in general has great deportment (that's
what teachers call behaviour) and very few flame incidents. However I
have a suggestion to reduce congestion, at least on my mobile devices.
Before you click on reply to answer someones email, highlight the text
you are
Do I go RHCP on the downlink and LHCP for the uplink or vice versa for
Mode B? I may add RH/LH switching later but for now my new antennas
will be fixed. Is there a reference that speaks to this issue?
73,
Tom K5VOU
___
Sent via
Is AO-07 mode hopping or stuck in one mode at the present? On 14 July
2012; at 23:55 UDT, I just had a nice 40 degree high pass and heard
nothing on 145 MHz. Me or the bird?
Tom K5VOU
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of
W5PFG wrote:
Checking the web page at http://oscar.dcarr.org/ is the best
indication/predictor of mode A/B operation I've found.
73
Clayton
W5PFG
On Sat, Jul 14, 2012 at 8:05 PM, Tom Gentry t.gen...@verizon.net wrote:
Is AO-07 mode hopping or stuck in one mode at the present? On 14 July 2012
13 matches
Mail list logo
