Birders,
I’m confused about the required entries into DOPPLER.SQF, and would appreciate
your help.
In entering the line required for AO-73, is the order LSB,USB or the reverse,
USB, LSB? The source of my confusion is that the instructions in the software
indicate “Up- and Downlink modes” while
Thanks Eric and Dave,
The file is done. CU on the birds.
73,
Tony, N2UN
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
___
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of
Hi All,
I just installed (upgraded) to SatPC32 v. 12.8c.
Now, I have two installations here. One on my new laptop, and one on my
desktop PC. Laptop is for portable work, of course.
I noticed that on my laptop installation, on the SETUP menu OPTIONS
dialog, there is a checkbox for GROUND TRAC
After a few months of inactivity, SATpc32 is showing a funny but unfortunate
feature: out of the 6 sats I have active (no change from previous use), only
the linear birds show up on the screen. They are shown in the normal way, with
the outline of their footprint always visible. The FM birds
Satellite newby here, trying to setup a station...
For all you SatPC32 users, a question. I'm using the software with 2
radios. One is an Icom IC-706MKIIG, the other is a Icom IC-746. While
the 706 covers vhf and uhf, the 746 only covers vhf.
The way my version of SatPC32 is set, it tries (d
Hi,
Anyone using a netbook running Windows 7 Starter with SatPC32?
Have you used the Radio Shack USB/Serial adaptors with it? I use 2 of them on
my desktop without trouble, but will they work with the netbook?
What model netbook would you suggest? Any other suggestions? Tricks? Hints
and Ki
*Question?
I have "Setup" the Kenwood TS-2000X & completed that 1st. step,
& the "readme.txt says "Choose the COM Port # for CAT control"
& can't find the box where the words "COM port" is?
Can someone help me?73,.Stu (WA2BSS)
Ps It is definetly a "3H" day (Near 100 degrees in
Hi everyone,
There must be an easy way to load Keps from a file on a 3 1/2" floppy, but what
is it? (No internet on this laptop, but a floppy drive.)
I have 1 USB port that I hope to use for rig control, Where can I find a
proper driver for a USB flash drive that the laptop won't recognize?
Hi Jerry,
I added the "Start with Gt+" feature in Febr. 2014 - a suggestion of
Ron, W5RKN. Download the latest setup file or install the setup file you
installed on your Laptop also on your desktop PC.
73s, Erich, DK1TB
Am 09.06.2014 03:08, schrieb n0jy:
Hi All,
I just installed (upgraded)
Hi Erich,
Yes! I had downloaded but not yet installed (don't know why) 12.8c on
my desktop PC back in January this year.
When I went to do the upgrade yesterday, I first was going to copy the
zip file from the laptop but when I saw the same version already in the
downloads on my desktop PC I
I'm stumped..
I have CAT control turned on and ISS selected. In CAT control, I have 144.49
and 145.800 selected and that is what shows in the uplink/downlink widow
above the map. SATL function is on in the radio.
BUT, the top window on the radio shows 145.800, but the bottom window (vfo
a)
Hi Jim,
You are correct that you need to get the Keps in the same group to display them
at the same time.
They will eventually migrate, and you can request that from Tim Kelso on his
web site to speed the
process up.
As for seeing them simultaneously, use Multitrack. First go to Satellites. O
Sat32PC works great for me but I do have one question. I am finishing up my
rotor control software that works with SatPC32 and need to know what happens
with SatPC32 when there is a directly overhead pass if SatPC32 is set up
with a 90 degree max for the elevation rotor. I have no idea how to set u
13 matches
Mail list logo