r helper app page? Are there any other helper
> apps?
http://www.analog.cx/helpers/
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|
maintain these
connections. See http://www.analog.cx/docs/faq.html#faq128 for a
discussion (it's the same issue described there).
> 3. Lastly, is there any way to decide the order of the actual
> reports?
Use the REPORTORDER command,
http://www.analog.cx/docs/outpu
address
> to exclude? Is it IPEXCLUDE?
HOSTEXCLUDE
> I could find no such commands in the manual however I am sure that you must
> have allowed for this.
See http://www.analog.cx/docs/include.html
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+--
of a mystery to me). If I
> knew the answer to this, i.e. which file holds all the commands, then maybe
> I can teach myself a bit more but even this basic point is baffling me.
> Thank you towhoever can help me; I'm sure it's a doddle once you know how.
REQFLOOR 10r
See htt
Apache / Unix it may not be a problem, it's
not recommended.
Try running Analog again and see if that fixes it. If not, make sure
that the version of analog you have installed and are running is 5.22,
not 5.02
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+-
ideas?
Did you specify your log file in the configuration file? Is it a
format Analog can auto-detect? Did Analog produce any warning or error
messages that might help diagnose the problem?
--
Jeremy Wadsack
Wadsack-Allen D
bunch of %j %j %j %j ?
As I said before Analog looks for the first match of the next
character immediately following the variable. So if the last variable
on the line is %j it will ignore everything up until the end of the
line. In other words, you only need one %j at the end of a line.
--
Jerem
ent will go through but I have
> attached a snippet of a log file called SampleDominoLog.TXT
It is preferable that you include 3 or 4 COMPLETE lines in the text of
your message than send a 28kb text attachment to all the members of
the list. The lines above (especially if complete) would have b
at. It would require more memory than the original log
files, in general.
Getting the referred URL (note the different term) is possible with
the ALIASes already suggested. I am guessing that you wanted to do the
previous.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+-
ts.
Alternately, you can use FAILFLOOR to tell Analog to only report on
failures since a particular data. See
http://www.analog.cx/docs/othreps.html#FLOOR for details.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is
o run analog with different settings
for each one. There are some examples of setting up Analog for virtual
hosts in the documentation HOWTO pages.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help
SUSANA PUMAR PAVON ([EMAIL PROTECTED]):
> When does Analog say [unknown domain] in the Domain Report? It really
> resolves the IPs. I have seen it at the dnscache file.
It usually means the IP resolved to a host that does not have a
domain. Like 'workstation1' or somethi
this kind of rotation before.
You might want to run analog with '-settings' to see what log files it
is loading and whether there are any constraints on dates (e.g. FROM
or TO commands) in effect.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+---
for instance, it considers any of the .gif
> files as a different type with its different alias.
Use REQALIAS instead of FILEALIAS. REQALIAS affects only the Request
Report. FILEALIAS affects all reports.
--
Jeremy Wadsack
Wadsack-Alle
; Aengus
> Thank you, but
> APACHELOGFORMAT (%A %h %l %u %t \"%r\" %s %b %{Host}i \"%{Referer}i\"
> \"%{User-agent}i\" \"%{X-Forwarded-For}i\")
> shows the following result:
> Warning L: Large number of corrupt lines
> try different LOG
?
You have language files from a previous version of Analog. Did you
upgrade your version and not change the language files? You should
re-install the current version, removing all existing language files.
--
Jeremy Wadsack
Wadsack
n "[not listed: ###]"? It's already there. Use the REQFLOOR
command to tell Analog how many items to display in the report. See
http://www.analog.cx/docs/othreps.html#FLOOR for details on the
command.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+--
character
that looks like a file name character:
FILEALIAS *?* $1:$2
If any of your requests have ':' in them, then you'll need to find
some other character for this.
Next, convert them back in the Request Report to
if you want to trace the processing, use the PROGRESSFREQ
command to get messages every so often during the run.
See http://www.analog.cx/docs/debug.html#PROGRESSFREQ for details
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+--
ange all reports to only show that traffic
HOSTINCLUDE 141.161.*
See http://www.analog.cx/docs/include.html
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
ile there are no extra spaces before! whats going on here?
This is exactly what it's supposed to do. Notice that the items with
spaces before the names are the same page, with different combinations
of arguments. You have told Analog (REQARGSFLOOR) to include to top 40
entries for argum
arguments" in the index for a
reference to all the possible arguments.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go
times web servers add log entries with invalid dates)? Have
you added any EXCLUDE, INCLUDE or ALIAS commands to the configuration
file since the original run?
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is th
that line.
In that case you'll need to create another report run with that set of
data.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list
e run. That's the only way. You are
asking Analog to analyze two different sets of data for the time
reports and Request Report, so you'll have to do two runs. You can
then combine the information into a single reports with a cut and
paste.
--
J
ntrol the time period for all reports, not just the
request report. You can't have two FLOOR requirements for a report.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubsc
FLOOR is for other reports. See
http://www.analog.cx/docs/othreps.html#FLOOR for details.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go
directs as "successful
requests" that Analog does not.
> Item E, however, bugs me. Can anybody guess why
> Distinct Hosts [Analog] and User Sessions [WT] should be so different?
Because they are different quantities.
> I think this is supposed to be the same data and my assumpt
is
unaware of the XAudio and xmms "browsers" because they are not web
browsers.
Unfortunately, there's not much you can do about this, except perhaps
use an alias to change those browsers into something t
XCLUDE
> /common/dir/*" but I want to specify the file as there are other files in
> this directory I want.
> Any suggestions?
You must have some other INCLUDE statement that is including it. Run
analog -settings to see what include statements Analog is processing.
--
J
k 'analog -settings' to see what it says for
inclusions.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.
You need all three to support all possible HTTP protocols. If all your
requests are HTTP/1.0 or HTTP/1.1 then you only need the first one.
The final %j tells Analog to ignore everything until the new line.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
[EMAIL PROTECTED] ([EMAIL PROTECTED
log utilizes?
Perhaps with some Unix tools, but not with Analog.
Analog does have memory control configuration commands through:
http://www.analog.cx/docs/lowmem.html.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This i
uot;%B" %j)
LOGFORMAT (%S %j %u [%d/%M/%Y:%h:%n:%j] "%j%w%r" %c %b "%f" "%B" %j)
LOGFORMAT (%S %j %u [%d/%M/%Y:%h:%n:%j] "%r" %c %b "%f" "%B" %j)
NOTE that each of those should be on one line starting with LOGFORMAT.
--
Jeremy Wad
day?
> 2.) If so, what is the command.
Use FILEINCLUDE to tell Analog to create a report on for a single
file. See http://www.analog.cx/docs/include.html for details.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
|
mmands. Analog will autodetect
common and combined format and many others.
If that doesn't work, use APACHELOGFORMAT command with the format from
above that is in use.
Full details on the *LOGFORMAT commands can be found here:
http://www.analog.cx/docs/logfmt.html.
--
Jeremy Wads
Stephen Turner ([EMAIL PROTECTED]):
> On Wed, 27 Mar 2002, Jeremy Wadsack wrote:
>>
>> > I re-downloaded the source tar and replaced my anlgform.pl. Again, I'm
>> > confused because it works on the linux command line, but not in my web
>> > browser.
&g
#x27;one wedge pie chart' messages) when I run analog
> from the command line in a command window under Win2000.
Use a *CHARTEXPAND command,
http://www.analog.cx/docs/hierreps.html#CHARTEXPAND. You will need to
be running Analog 5.2 or later.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
my anlgform.pl. Again, I'm
> confused because it works on the linux command line, but not in my web
> browser.
For security, the web interface does not support wildcards in log file
specifications. See http://www.analog.cx/docs/form.html#security
Aengus ([EMAIL PROTECTED]):
> "Jeremy Wadsack" <[EMAIL PROTECTED]> wrote:
>> Aengus ([EMAIL PROTECTED]):
>>
>> > I think your best bet will be to grep the logs for matching
>> > requests. Does anyone know how to create a regular expression
>
se cookie headers in your log format
you can get cookied information for all requests. If cookies are
handled by your server, then they should be sent for graphics requests
too.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
[EMAIL PROTECTED] ([EMAIL PROTECTED]):
> Okay, let me put it this way:
n 200 and
500 (inclusive) bytes, use something like this:
[2345]00
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
ly 7 files, it's not that much work.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
SUSANA PUMAR PAVON ([EMAIL PROTECTED]):
> I'm running Analog on Solaris 2.6. I think that is the problem. I don´t
> know how to treat the relative dates. I´ve looked it up with the command
> &#x
iguring a "floor" in the config-file ??
http://www.analog.cx/docs/othreps.html#FLOOR
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing
is on bash.
Finally, it's possible that Solaris's date command doesn't support the
relative dates or formats in the same way. Check 'man date' for
details.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
SUSANA PUMAR PAVON ([EMAIL PROTECTED]):
> I tried to run An
hink Analog will process a log file without either of these.
You may need to pre-process it to add these fields.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from th
would like to automate generating a
> new report for every month.
Analog does not support %y%M in log file statement. You can specify
the log file on the command line. You may be able to write a batch
file to automate this. Check the list archives for examples.
--
Jeremy Wadsack
W
t language
entirely and can be embedded in HTML pages to be run on the client.
http://developer.netscape.com/js/
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe fr
10Mb-100Mb: ...
> Is it possible to change size floors? I can't see
> it at http://www.analog.cx/docs/Readme.html...
What would such a FLOOR command effect? The histogram shows the
distribution of files by size. I'm not sure why you would not want to
include all buckets
ne.
You have two fields marked as %v. The first looks likely to be
correct. The second I would guess should be a referrer (%f.)
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing l
Chris,
This would appear to be an error in your shell script. As you didn't
include the script I can't give you any suggestions on it but it
appears you have a '[' where bash does not want it.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
Chris McQuade ([EMAIL PROTECTE
7;-2 days'` \
/log/http/iobox.com/access.log-`date +%Y-%m-%d -d '-3 days'` \
/log/http/iobox.com/access.log-`date +%Y-%m-%d -d '-4 days'` \
/log/http/iobox.com/access.log-`date +%Y-%m-%d -d '-5 days'
rrupt.)
I had assumed you had already done this, as you would have needed to
in your original format anyway.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
[EMAIL PROTECTED] ([EMAIL PROTECTED]):
> Sorry, I wasn't clear. It gives the total number of _all_ cookies - what I
> need is the
Did you read the FAQ item that I linked to? That's the double counting
I'm talking about.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
Michael Rabe ([EMAIL PROTECTED]):
> Thanks for the feedback - could you elaborate on the "double counting"?
> What is tha
e "sed" to change all the "300" status codes
> into 200s, then run the appropriate Analog reports.
> Any thoughts on this?
http://www.analog.cx/docs/faq.html#faq181
If you are ok with the potential double counting on directories, then
your sed approach is prob
Isn't that what you want to do? Count the total number of unique
cookies for the period or log files?
--
Jeremy Wadsack
Wadsack-Allen Digital Group
[EMAIL PROTECTED] ([EMAIL PROTECTED]):
> I thought something like this would be the solution - but I can't seem to
> get
ce with two
> different *INCLUDE values?
You can't. You can hijack another variable, such as the virtual host
one, if you don't need it, and use the Virtual Host Report to track
the other field. Perhaps something like this in your LOGFORMAT:
%jidl_visitor=%u;%jidl_visit=%v;%j
Als
from the Request Report and Browser Summary,
stay with the EXCLUDEs you have and accept the fact that the General
Summary (and all other reports) are including that traffic.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
27;t be listed as a domain or organization.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.isite.net/listgate/analog-he
at all? I am using IIS5 and W3C logs. Thanks!
It's only affecting reports in that the byte columns, if you have any,
may not represent bytes for all requests in the request column. It's a
warning to let you know that the values may not be consistent, but it
still lists counts all reque
n: Has anyone addressed this, or am I going to have to start from
> scratch?
If you are certain that the crawler is not behaving properly, can you
contact me off the list with more information about your site, so I
can work out any bugs that may be in the software?
Thanks,
--
Je
rd-party tools on the Helper Applications page,
http://www.analog.cx/helpers/.;
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|h
ant actual visitors, you can't really get that
number. See http://www.analog.cx/docs/webworks.html for reasons why.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe fro
.js
If you want to just remove those entries from the Request Report, then
use this:
REQEXCLUDE *.gif,*.jpg,*.css,*.js
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To
5.21
This is COMPUTER output format. You probably want HTML for your
browser to read it. Change your Analog configuration file to OUTPUT
HTML (or remove the OUTPUT COMPUTER line) or add that directive to
your form.
--
Jeremy Wadsack
Wad
t; Can analog now link an Organization name to the IP or is there a way
> to do this within Analog?
I answered this question when you posted it yesterday, Michael:
http://www.mail-archive.com/analog-help@lists.isite.net/msg11243.html
--
J
p://www.mail-archive.com/analog-help@lists.isite.net/msg10466.html
and a vested interest in this discussion:
http://www.reportmagic.org/
If you choose to take this discussion off the list, can you please
include me in it?
Thanks,
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+-
;t an option, please let me know so I can start writing the parsers
>for the other formats. :o)
Analog does not have any templating built into it, just the predefined
output formats. There is a tool on the Helper Applications page
(http://www.analog.cx/helpers/) called anaml that converts CRO to XML
is with aliases. See
http://www.analog.cx/docs/alias.html for details on the ORGALIAS
command.
Report Magic will pass through whatever information Analog tells it.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
|
> RMagic.
This has become a FAQ for Report Magic so it will be added in a
forthcoming version.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|
when computer-readable output is generated.
No, they are calculated metrics, and can be easily determined from the
other values in the General Summary.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-h
125 0.35000 111.222.333.66
> I would like to see it as
> S Rr 400 0.35 111.222.333.*
> Or move it to even a higher level at 111.222.*
> Is there a way to specify this in the config file.
The Organisation Report does this in version 5 and later.
--
Jeremy Wa
wer about it.
Analog is already doing this. It's just a warning (not an error) in
case you expect the log files to not overlap. You can use the WARNINGS
command in your Analog configuration file to disable this message.
--
Jeremy Wadsac
bytes, etc (depending on
columns selected) that the user has. If your log file does not have
users (your website does not require logins) then you will have no
data in the report and Analog won't generate it.
--
Jeremy Wadsack
Wadsack-Allen Di
make sure that analog.cfg and manconf.cfg did not
inadvertently get overwritten with logfile data. They should both look
like Analog configuration files.
> With SETTINGS ON, I just get all the settings listed, no warning
> messages, but no report either!
That's what SETTINGS ON is su
idn't for the format. Your log
format is correct if most of the lines in your file are not corrupt.
One of your INCLUDE or EXCLUDE commands must be filtering all those
entries.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
bstatistik/
>>
>> Any Suggestions?
>>
> Does this happen if you use analog on its on without Report Magic? If not,
> it's probably a RM problem and should go to the reportmagic-help mailing
> list.
This was posted to both lists. I respon
OST(IN|EX)CLUDE affects what items are included in the
Redirected Host Report.
There are no basic data types of 'redirection' in Analog.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-h
f logic, preprocessing the files before you have
Analog analyze them.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://list
ct them.
Are you telling Analog to write the pie charts all to the same folder?
Then it will overwrite the image files each time it runs and you will
be left with the last images created (likely one of the
subdirectories). If you are creating several reports with separate
images, you should put them
.) I'm not quite sure, what you want, but I think it's
this:
USERALIAS REGEXPI:user=(.*?)\s*(;|$) $1
> I have a cookie called 'user' to record all users. Could you please let me
> know what else might have to be done or inform me of any mistakes I might be
Also check
made by a single given user at a time, using
USERINCLUDE command.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
|http://lists.
the Referrer Report and the sites will be summarized in
the Referring Sites Report. You can't tell how the user got to THAT
page unless you have that site's logs. You normally don't get referrer
data for bookmarks (what would the referrer be?) so this tells you
that the user clicked o
someone tell my which exclude I have to put in my configuration
Use the REQEXCLUDE command to remove items from the Request Report.
This is covered in http://www.analog.cx/docs/include.html.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+--
h the format to
the line.
This should help a lot in determining where the problems are.
But since this is the format that Apache is logging in, I don't see
any reason why Analog would not be able to parse that. I think your
problem is with other logfiles.
You can also use
SETTINGS ON
to hav
ile line) use tabs to separate,
not spaces. Without quotes around the browser, space-delimited log
file lines would be useless.
Seconds, there's a username between the host and browser fields that
you are missing.
Third, you have a lot more fields that you are throwing out (%j) than
there
and end-of-line there. Your
logformat has told Analog to expect at least one more field.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| mailing list, go to
. This format command will work
for this line (make sure the command is all on one line):
APACHELOGFORMAT (%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
\"%{User-Agent}i\")
If you are specifying the log file from a different configuration file
or from the comman
TINCLUDE, analog will include all lines from the log file in the
report. If you have excluded lines from that server, just add a
VHOSTINCLUDE line to get them back.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| Th
filter items in each report. http://www.analog.cx/docs/include.html
Also, you might want to use the Browser Summary, rather than the
Browser Report.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help m
't have
bytes.
You can change the warnings with the WARNINGS command. See
http://www.analog.cx/docs/debug.html#warnings for details.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing li
Analog can't recombine or understand the lines if they are broken up.
It's possible that you could write some script to rebuild the files,
but it would need to know a lot about the data to do that.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+-
the browser. Browser
Summary is a summary of that data in the format we usually expect
(MSIE, Netscape, Opera, ... each broken down into version and
subversion).
[Stephen.. isn't this becoming a FAQ?]
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
lly detect the format. If not, follow the directions in the
documentation (http://www.analog.cx/docs/logfmt.html) to build your
own LOGFORMAT string.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing
er in the distribution. Start with the Readme.html file. Or you
can get them from the websites here:
http://www.analog.cx/docs/Readme.html. In particular, look at the
'Starting to use analog' page and select a start page for your
platform.
--
Jeremy Wadsack
Wadsack-
t prints
the number of the row for each user. That will give you a count of
users listed in the report (but not those excluded or below the
floor.)
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the an
ll make requests like
/intranet/gcm/main/gcmprd1.ns4/va_AllSubCat1?OpenView&Expand=3
look this this in the reports
/intranet/gcm/main/gcmprd1.ns4/va_AllSubCat1.OpenView?Expand=3
You can probably use a REQALIAS to convert them back for the Request
Report
This is in the FAQ)
If you take out the error log, that may remove a lot of your corrupt
line messages.
--
Jeremy Wadsack
Wadsack-Allen Digital Group
+
| This is the analog-help mailing list. To unsubscribe from this
| m
umbers, especially near the bottom of reports.
The proper way to do this is with Analog cache files
(http://www.analog.cx/docs/cache.html). This is mentioned in the
documentation on COMPUTER output and in the faq:
http://www.analog.cx/docs/faq.html#faq157.
--
Ana Paula ([EMAIL PROTECTED]):
> What can I do for enable statistics to get users browsers details
> (like: netscape 5%, Internet Explorer 33%, etc) ???
> I'm using Analog 5.1-1 and Report Magic 2.12 .
Turn on the Browser Summary in your Analog config:
BROWSERSUM ON
--
1 - 100 of 1338 matches
Mail list logo
