; there's some problem.
> a power cycle should have completed after 'reset' command.,
>
> On Fri, Apr 9, 2010 at 10:14 AM, ajish zacharias
>
> wrote:
> > Sir ,
> > I tried procedure mentioned in
> > http://code.google.com/p/rowboat/wiki/ConfigureAnd
sir thanks for advice,
i try boot command ,then terminal it is mention booting linux
kernel ,but hdmi sreen doesn't get any o/p , in terminal also same
message(booting from linux kernel ) ,sir can you tell what is the
problem ,thanking in advance
with regard ajish zacharias
On Apr 9, 1:
; there's some problem.
> a power cycle should have completed after 'reset' command.,
>
> On Fri, Apr 9, 2010 at 10:14 AM, ajish zacharias
>
> wrote:
> > Sir ,
> > I tried procedure mentioned in
> > http://code.google.com/p/rowboat/wiki/ConfigureAnd
3 beagleboard.org # setenv bootargs 'mem=128M
androidboot.console=ttyS2 console=tty0 console=ttyS2,115200n8 root=/
dev/mmcblk0p1 rw init=/init rootwait
omapfb.viedo_mode=640x480mr...@60'
OMAP3 beagleboard.org # reset
resetting ...
thanking advance
with regards Ajish Zacharias
i try port angstrom on beagle board .i copy MLO,uboot.bin,uImage into
the fat32 partion, then i copy android.donut.rootfs.tar.bz2 to ext 3
partion .then i set baudrate 115200, stopbit 1flow control none , but
i get 0 0 on terminal/ialso try the link
http://code.google.com/p/rowboat
from beagle
