Hello,
One of the Sipura 2k's I'm using has a dialtone that occasionally fades to
static when the user picks up the line. Are there any settings that I can
check that would affect this?
Regards,
Christopher
___
Asterisk-Users mailing list
[EMAIL PROT
Sergio,
Did you try to install G729 while you had a CD in the CDROM drive?
Regards,
Christopher J. Wolff, VP CIO
Broadband Laboratories, Inc.
http://www.bblabs.com
--__--__--
Message: 4
From: "Sergio Serrano" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Date: Thu, 25 M
Hi,
I'm generating an error in the logs that looks like this:
Feb 10 13:19:36 NOTICE[17743913]: Request to schedule in the past?!?!
This error is triggered when I execute the following line as part of my auto
attendant.
exten => s,2,Wait,1
Any suggestions are fantastically appreciated.
_
Hello,
I'm running the 1/14/04 CVS and am having problems with faxes. I've tried
faxing through both a Cisco ATA186 and Sipura SPA2000. I have Asterisk, the
ATA186 and Sipura all hard coded to G711ulaw.
When the fax machine trains, I get a stream of errors in the log file. The
log is attached
. Any
suggestions on how to change *, ATA186, or SIPURA SPA-2000 to enhance the
card terminals ability to process would be appreciated.
Regards,
Christopher J. Wolff, VP CIO
Broadband Laboratories, Inc.
http://www.bblabs.com
___
Asterisk-Users mailing
Regards,
Christopher J. Wolff, VP CIO
Broadband Laboratories, Inc.
http://www.bblabs.com
<><><><><><>
type
functionality? I found one in the voip-info wiki but only a couple of
topics were filled out.
Regards,
Christopher J. Wolff, VP CIO
Broadband Laboratories, Inc.
http://www.bblabs.com
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digiu
I have three cisco 7910 phones connected to * through skinny protocol. When
one of the phones is called, and the phone is ringing, you can hear what's
going on in the room even though the caller hasn't answered. It's crazy and
very hard to ignore when someone is calling :) God forbid you should
Hello,
I was successfully using the BT-100 phone with CVS 11/10. Now that I've
upgraded to 11/27, I can't place an outbound call. However the phone is
registered and works well with inbound calls. Any suggestions will be
appreciated. Thank you.
Regards,
Christopher
__
Regards,
Christopher J. Wolff, VP CIO
Broadband Laboratories, Inc.
http://www.bblabs.com
Hello,
I'm running a bone stock * box that only has SIP clients and about a dozen
cisco T1 gateways. Some of the higher delay users complain that they
occasionally hear echo on local and long dis
TFTP config would be fantastic, but right now my #1 piss-off is that I have
to dial a phone number twice or sometimes three times for the phone to take
all the digits. Someone on the list said it was like a manual typewriter
and I agree 100%
Regards,
Christopher J. Wolff, VP, CIO
Broadband
Adam, a patch would be fantastic. I am using chan_h323. I'm under the
impression that the problem had to do with my system being scsi based
instead of IDE based - the license installer read something off of the IDe
bus.
Message: 6
From: "Adam Hart" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Adam,
The codec license installer segfaults asterisk on my scsi system. I believe
Digium is very intent on resolving the issue but voiceage may be monkeying
around.
From: "Adam Hart" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Subject: Re: [Asterisk-Users] RE: G729 codec
Date: Wed, 22 Oct 2003 1
>
>
>Won't happen. Just spend the $10 and support Asterisk.
>Jeremy McNamara
I'd spend a couple o'hundred if the G729 worked....
Regards,
Christopher J. Wolff, VP, CIO
Broadband Laboratories
http://www.bblabs.com
___
Hello,
Is there any way to pass an H323 ID (resembles a sip [EMAIL PROTECTED]) to an
h323 gateway? Thank you in advance for your suggestions!
Regards,
Christopher J. Wolff, VP, CIO
Broadband Laboratories
http://www.bblabs.com
___
Asterisk-Users
Is it safe to assume that a fresh CVS build will not have the SIP
translation problem described?
Regards,
Christopher
--__--__--
Message: 11
Date: Mon, 29 Sep 2003 12:45:40 -0700
To: [EMAIL PROTECTED]
From: "Ernest W. Lessenger" <[EMAIL PROTECTED]>
Subject: Re: [Asterisk-Users] Is somthing broken
Has anyone managed to get a 7910 working with * through SCCP?
Regards,
Christopher J. Wolff, VP, CIO
Broadband Laboratories
http://www.bblabs.com
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
17 matches
Mail list logo