VirtualBox.
Even more strange, Trixbox DOES work. I think I'll continue with trixbox by
the moment
On Sun, Nov 2, 2008 at 11:18 PM, Tzafrir Cohen <[EMAIL PROTECTED]>wrote:
> On Sun, Nov 02, 2008 at 10:03:12PM -0600, Edgar Guadamuz wrote:
> > Hi all,
> >
>
Hi all,
I installed asterisk 1.4.22 on a Dell poweredge 2950, with 4GB RAM. I used
debian, but the default kernel doesn't recognize the 4GB, just 3, so I
installled the linux-image-2.6.18-6-686-bigmem kernel, that do recognize the
whole 4GB. Asterisk seems to be installed correctly, but I had two
at 10:17 AM, Russell Bryant <[EMAIL PROTECTED]> wrote:
> Edgar Guadamuz wrote:
> > Hello,
> >
> > I followed the steps by Russell_
> > http://www.venturevoip.com/news.php?rssid=1980_
> > and I got it working for publish_event only. As soon as I add
> >
Version 2 of Linux-HA allows order constraints, so you can first set the IP
and then start asterisk. (service asterisk should be down until IP address
moves)
On Wed, Oct 15, 2008 at 7:17 PM, Nhadie <[EMAIL PROTECTED]> wrote:
>
>
> Gleim, Jason wrote:
> > How did you define the secondary IP addr
Are you using bindaddr=0.0.0.0 in sip.conf and iax.conf ??
On Wed, Oct 15, 2008 at 5:35 PM, Steve Totaro <
[EMAIL PROTECTED]> wrote:
> I had an issue in 1.2.x that I am not sure ever got fixed but having two
> NICs on the same subnet did strange things. Strange like one NIC would be
> used fo
Hello,
I followed the steps by Russell*
http://www.venturevoip.com/news.php?rssid=1980*
and I got it working for publish_event only. As soon as I add
subscribe_event, Asterisk doesn't start and I just get the following
message:
*Oct 11 6:38:04.340485 [CLM ] nodeget: trying to find node
Hi,
Just to review the test I did:
---SIP extension-- Trunk
-
| SIPp |<--->| Asterisk 1 |<>|
Asterisk 2 |
------
--
Both Asterisk b
Done!
I had to do
# cd /usr/src/asterisk
# ./contrib/scripts/get_ilbc.sh
and the compilation was successful
On Thu, Sep 11, 2008 at 11:55 AM, Edgar Guadamuz <[EMAIL PROTECTED]> wrote:
> Hmm... Ok, I tried that but encode.h and decode.h were not found...
>
>
>
>
> On We
Hmm... Ok, I tried that but encode.h and decode.h were not found...
On Wed, Sep 10, 2008 at 11:23 AM, Thomas Kenyon
<[EMAIL PROTECTED]> wrote:
> Edgar Guadamuz wrote:
>> I notice that I have only format_ilbc.so but not codec_ilbc.so... is
>> it due to the compilation or
I notice that I have only format_ilbc.so but not codec_ilbc.so... is
it due to the compilation or there is some way to create the module?
On Sun, Sep 7, 2008 at 11:14 PM, Stelios Koroneos
<[EMAIL PROTECTED]> wrote:
> Make sure there is no "noload => codec_ilbc.so" in the module folder
> You can
Hi all,
In my modules.conf I have the autoload=yes, and there is one
codec_iLBC.so module in the modules folder.
However, when I do show translation, I see no translation to/from iLBC
nor G.729, and I'm not able to establish call to channels using these
codecs.
I read that there are some "forma
Hello,
I have been testing a trunk IAX and another SIP, using sipp to
generate SIP calls to a Asterisk box.
The testing dialplan just connects to another Asterisk box, who
answers the call and playback some files.
I noticed that the cpu load is higher when I use an IAX, about 90% for
25 simulta
I have used the OpenSer dispatcher module to load the calls (hash by
caller id) to a group of asterisk boxes (In my case, 2 servers).
The Asterisk boxes both use ARA and MySQL Master/Master replication.
In a case like yours, I think you can use MySQL cluster, and you can
still use Dispatcher to ba
PROTECTED]> wrote:
> yeah something like that. is it possible to set asterisk to make 10
> calls per second?
>
> On Thu, Jun 12, 2008 at 8:23 AM, Edgar Guadamuz <[EMAIL PROTECTED]> wrote:
>> I know you can limit the total calls in any given time, for example,
>&
I know you can limit the total calls in any given time, for example,
you say I would like to have 10 SIP calls established as maximum.
On 6/11/08, Mark Quitoriano <[EMAIL PROTECTED]> wrote:
> Is there a way to limit or set the calls per second on SIP?
>
>
> --
> Regards,
> Mark Quitoriano
> Blog |
I am trying DB replication with MySQL. I have two nodes, and Linux-HA
running on both of them. The first idea is simply have the master
database in one server, where both nodes send the SQL queries and in
the other node a second DB replicated from the first one. In the case
of the master database f
What kind of test would you like? An IAX call for example?
On Feb 12, 2008 8:29 AM, TC <[EMAIL PROTECTED]> wrote:
>
> ANeyone ??
> do we have no asterisk users in costa rica that would be so kind as to allow
> some usability testing
> I am considering an extended vacation but will need to some ggo
I think is a traditional Asterisk box with a dialplan with voicemail()
application in the first priority of every one...
The issue to resolve is about messages indicators... anyone with this?
On Feb 10, 2008 6:24 PM, Cheikhou DIAW <[EMAIL PROTECTED]> wrote:
> HI list,
> i've been googling all
Hi list,
Anyone knows where I can get information about configuring a Dialogic
card to run with Asterisk?? The model I have is D/120JCT-LS. Somebody
told me that I had to buy the driver, but I don't know if this is true
and if so, who, how and how much...
_
11/1/07, ram <[EMAIL PROTECTED]> wrote:
>
>
>
> On 11/2/07, Edgar Guadamuz <[EMAIL PROTECTED]> wrote:
> > Hi, guys
> >
> > I´ve just seen thta OpenSER can be coupled with Asterisk for load
> > balance, with the dispatcher module, something like t
Hi, guys
I´ve just seen thta OpenSER can be coupled with Asterisk for load
balance, with the dispatcher module, something like this:
dispatcher.cfg file
# group sip addresses of your * units
1 sip:10.1.2.3:5060
1 sip:10.1.2.4:5060
1 sip:10.1.2.5:5060
the basic openser.cfg should be like:
load
The model AP200 that you are giving as example is 2 port only... and
i'm not sure about the price...
I know that codec conversion is one of the most cpu-intensive task
that asterisk has to do, so, you can chose a Digium/Sangoma card with
a "powerful" server doing the work or you can also use a VoIP
About memory, I think 512MB will be more than enougth. And hard drive
requirements depends on the configuration of your voice boxes, but any
modern server will be OK, I don't think that you need more than
20GB...
On 10/14/07, Paul Hales <[EMAIL PROTECTED]> wrote:
>
> We use dell 860 rackmount serv
So do I, and I'm working in ellaborate some labs for high availability
and load balance in asterisk distributed systems.
On 10/8/07, Mike Clark <[EMAIL PROTECTED]> wrote:
> JR Richardson wrote:
> > Hi All,
> >
> > I've been labing up some HA Asterisk senario's using LVS, Ultamonkey,
> > Asterisk
Once I had a problem like this and I fix it using a jumper in the
motherboard (it was an IBM server) to force 32 bits...
Quiza en tu caso puedas investigar un poco las opciones del servidor...
On 9/23/07, Jared Smith <[EMAIL PROTECTED]> wrote:
> On Sat, 2007-09-22 at 12:21 -0500, Ricardo Melendez
A question. are the clients going to be able to manage the PBX? or
are you going to give them the PBX service without access to each
server?
On 9/6/07, Tzafrir Cohen <[EMAIL PROTECTED]> wrote:
> On Thu, Sep 06, 2007 at 04:38:40PM +0100, Senad Jordanovic wrote:
> > Any opinions/comments/recom
I have a confusion about using SER for balancing the load across the
Asterisk boxes. The doubt is: once a user registers in a Asterisk box,
all the calls from or to him are going to be done by the same Asterisk
server or can a user make a call by one Asterisk server and then make
another call by ot
I have used CentOS and it works fine and it is easy to install. I know
that Debian is a little more complicated to install Asterisk and some
teatures on Debian.
I'd choice CentOS 4.2 or 4.4, as my personal preference.
___
--Bandwidth and Colocation Provi
Thanks Diego :)
It works now. For the rest of the people, the commands needed were
/var/lib/asterisk/bin/retrieve_conf and then asterisk -rx reload
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users mailing list
To
Hello guys,
I'm using Trixbox and I have a PHP application that updates a value in
the MySQL asterisk database as an interface to have a dynamic
customizable IVR.
After execute the UPDATE SQL query, the php application is supossed to
reload asterisk or restart amportal in order to get the change
Hello... I have been studying how to get Asterisk redundancy with
Linux-HA. You can have 2 asterisk boxes, then install the linux-HA
(Heartbeat) software and if one of the asterisk servers fails the
other will take his IP so the clients registered on that server can
re-register in the other. The re
Hello Asteriskers,
I'm confused about why Asterisk is not a SIP proxy and why exactly
this can affect the performance of a large Asterisk system.
I know that Asterisk acts as a useragent endpoint, but my doubt is why
exactly Asterisk could overload the call flow if the RTP voice stream
goes from
Very good... by the way, I'm studing electrical engineering and I've
chosen asterisk scalation as my final graduation project. I hope do a
similar work within and asterisk cluster.
On 5/25/07, William Moore <[EMAIL PROTECTED]> wrote:
On 5/25/07, Matthew J. Roth <[EMAIL PROTECTED]> wrote:
> Li
Thank you Alex and It would be possible to do that using IAX too,
wouldn't it?
I mean something like
exten=>_9NXX,1,Dial(Zap/g0/${EXTEN:1})
exten=>_9NXX,2,Dial(IAX2/[EMAIL PROTECTED]/[EMAIL PROTECTED])
___
--Bandwidth and Colocation provid
Hello eveybody,
I've been looking for a way to share trunks between two asterisk
servers. I guest I have to use Dundi, but I've not found the exact
method yet. I need a way to allow users registered in one server to
use the another server's trunks in the case the first server's trunks
were busy
35 matches
Mail list logo
