Dear,
I have redhat enterprise linux 6.3.
after "uname -a" i am getting
Linux genesys-dell 2.6.32-279.el6.x86_64 #1 SMP Wed Jun 13 18:24:36 EDT
2012 x86_64 x86_64 x86_64 GNU/Linux
now when i am trying to insall dahdi driver on my server i am getting
below error.
[root@genesys-dell dahdi-lin
I have Asterisk server 1.8.19 with jabber enabled.
On the other side i have openfire server with asterisk-im enabled.
I have a doubt, whether my sip client connected with asterisk can send
message to other sip client, which is connected to same asterisk server.
I have jitsi as a sip client.
If
I have Asterisk server 1.8.19 with jabber enabled.
On the other side i have openfire server with asterisk-im enabled.
I have a doubt, whether my sip client connected with asterisk can send
message to other sip client, which is connected to same asterisk server.
I have jitsi as a sip client.
If
ult
> > channel=1-20
> >
> > #include dahdi-channels.conf
>
> From your description, the link between the pbx and (77)asterisk
> is analog. Analog can only pass caller id information in one
> direction. It looks like you have it setup to pass caller id
> from the
my scenario is below
analog phone (10 to 99)--> pbx-->(77)asterisk> jitsi(2000)
i have analog telephone interface numbered 77 attached with asterisk and
other sip user is 2000 on jitsi.
I can call from any number from 10 to 99(in intercom) on 77 and ivr
response will come then i
hocancel=yes
signalling=fxs_ks
context=default
channel=1-20
#include dahdi-channels.conf
any help
thanks..
Do not bother about below message. That is auto-generated by my mail
server.
-
ting [88@myphones:2] Hangup("SIP/sandeep-0004", "") in new
stack
== Spawn extension (myphones, 88, 2) exited non-zero on
'SIP/sandeep-0004'
any help.
Please do not bother of belo
1: Red Alarm
-- Hanging up on 'DAHDI/1-1'
-- Hungup 'DAHDI/1-1'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [81@myphones:2] Hangup(&quo
Hi,
I am configuring my asterisk server as below scenario
Jisi> Astrisk->Analog PBX-> Phones
For that I have Asterisk Server 1.8.1 in my PC
Digium card in my PC
TDM2400P with 5 Red (FXO) module
I install dahdi and modprobe in my system. After that i configured
chan_dahdi.conf file