> Research wrote:
>> . I saw a nice article on voip-info.org on how to replace voicemail
>> server for Avaya Definity with asterisk.
>>
>
> Could you send me the link of the article? I'll be looking into doing
> this within the next year.
>
> Thanks,
>
> Doug
Hi Doug
See: http://www.voip-info.or
Hi Shahnawaz
Have you considered how you are going to address location issue for Mobile
users calling 911. You should think of SS7 MAP/TCAP to atleast know their
Cell ID
Regards
Sam
> Thanks very much everybody who contributed their thoughts. I would try
> to get some DID's so that each physical
Hi Shahnawaz
Have you considered how you are going to address location issue for Mobile
users calling 911. You should think of SS7 MAP/TCAP to atleast know their
Cell ID
Regards
Sam
> Thanks very much everybody who contributed their thoughts. I would try
to get some DID's so that each physical lo
Hi Team
Can someone advice me on how i can lower the load average on my asterisk
server?
dahdi-linux-2.1.0.4
dahdi-tools-2.1.0.2
libpri-1.4.10.1
asterisk-1.4.25.1
2 X TE412P Digium cards on ISDN PRI
Im using the system as an IVR without any transcoding or bridging
*
Hi Steve
> Even though you shouldn't have to, have your rebooted? 200 days of
> uptime and this just started?
It seems this problem is common as i have three boxes of the same capacity
with exactly the same problem. So reboot should only solve the problem for
a while
>
> Have you recently update
>> Hi Team
>>
>> Can someone advice me on how i can lower the load average on my asterisk
>> server?
>>
>> dahdi-linux-2.1.0.4
>> dahdi-tools-2.1.0.2
>> libpri-1.4.10.1
>> asterisk-1.4.25.1
>>
>> 2 X TE412P Digium cards on ISDN PRI
>>
>> Im using the system as an IVR without any transcoding or bri
>> Hi Team
>>
>> Can someone advice me on how i can lower the load average on my
asterisk server?
>>
>> dahdi-linux-2.1.0.4
>> dahdi-tools-2.1.0.2
>> libpri-1.4.10.1
>> asterisk-1.4.25.1
>>
>> 2 X TE412P Digium cards on ISDN PRI
>>
>> Im using the system as an IVR without any transcoding or bridgin
What do you mean chief? What am looking at is ability for asterisk to
receive a call and recording until it tier down without bridging it to the
physical device
Sam
> Would you like the advice in all caps?
>
> On 03/15/2010 01:20 AM, RESEARCH wrote:
>
>> Hi there
>>
>> I remember to ask this quest
What do you mean chief? What am looking at is ability for asterisk to
receive a call and recording until it tier down without bridging it to the
physical device
Sam
> Would you like the advice in all caps?
>
> On 03/15/2010 01:20 AM, RESEARCH wrote:
>
>> Hi there
>>
>> I remember to ask this quest
Oh.. I didnt know that.
Thanks
Sam
> Muro, Sam escribió:
> What do you mean chief? What am looking at is ability for asterisk to
> receive a call and recording until it tier down without bridging it to the
> physical device
>
> Sam
>
>> Would you like the advice in all
ith alternative solution?
Muro, Sam wrote:
> Oh.. I didnt know that.
>
> Thanks
> Sam
>> Muro, Sam escribió:
>> What do you mean chief? What am looking at is ability for asterisk to
>> receive a call and recording until it tier down without bridging it to
>> the
>&g
Moises Silva wrote:
> On Mon, Mar 22, 2010 at 7:56 PM, Rafael Prado Rocchi
> wrote:
>
>> Hi, it's not that simple.
>> It requires deep modification on asterisk and dahdi sources to work the
>> way
>> you want.
>>
>
> Why? I must confess I still don't quite understand what he wants, from
> what
> I'
Hi there
Consider this. You have three SIP extension 200, 201 and 202 and you have
configured your phones, say Polycom 331 to those accounts. 200 being one
very sensitive individual.
Lets say, an insider, get a new phone or perhaps an xlite and configure it
with the same extension, 200. Asterisk
Terry Wilson wrote:
> - Original Message -
>> From: "Sam Muro"
>> To: asterisk-users@lists.digium.com
>> Sent: Friday, October 14, 2011 2:02:01 AM
>> Subject: [asterisk-users] Asterisk Security: Allow only one phone per
>> sip registration
>> Hi there
>>
>> Consider this. You have three SI
Terry Wilson wrote:
>
>> Is there a way one can bind sip account to specific mac-address
>> (assume on
>> the same subnet). In this way, even if you know the username/secret,
>> you
>> will still have to use the same physical phone, unless you play with
>> mac-address.
>
> No. And mac addresses ar
Thanks Terry!
Let me think of all possibilities and shall holla. Can you be one?
Terry Wilson wrote:
>> Thanks. Let me see how best i can complicate them per phone. Ooops,
>> 1000
>> sip phones
>
> If it were me, I would look into Asterisk Realtime for handling the SIP
> phones. I would then writ
Thanks A.J
I know and I can assure you no one will get that physical access to the
system.
A J Stiles wrote:
> On Friday 14 October 2011, Muro, Sam wrote:
>> Hi there
>>
>> Consider this. You have three SIP extension 200, 201 and 202 and you
>> have
>> configure
Hi there
I have just took a support of a customer with hundreds of IP phones,
mostly Polycom with mixed models.
Is there a way to query asterisk or any other command to retrieve the
inventory of all connected phones. i.e. Phone Type and Phone Model, say
Polycom SPIP331 or so
Thanks
Sam
--
_
Thank you all
You are a life saver
Sam
Dale Noll wrote:
> On 02/23/2012 08:49 AM, Danny Nicholas wrote:
>> Here is a snippet that somebody smarter than I am can improve upon
>> for a in `asterisk -rx "sip show peers"|cut -f1 -d/` ;do asterisk -rx
>> "sip
>> show peer $a";done|grep Useragent
>> f
I have a scenario whereby two servers are acting in active-standby mode.
In case the active server fail, the shared IP is activated on standby
server for continuity.
However, SIP phones (all are Polycom) takes quite a long time to register
to the Standby Server (up to 1-10min). While Polycom allow
Hi Takehiro
Are you suggesting sharing the AstDB ?
Sam
Takehiro Matsushima wrote:
> Hi.
>
> How about place backend DB on shared disk, or make replication between
> them?
> 2012/02/24 13:58 "Muro, Sam" :
>
>> I have a scenario whereby two servers are acting
Hi there
Has anyone know how to configure asterisk to be able to query Corba
interface directly from the dialplan
Sam
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live
Hi there
Does anyone know how to configure asterisk to be able to query Corba
interface directly from the dialplan
Sam
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a
I am having a problem understanding the way to retrieve some parameters to
asterisk via AGI or what ever method that fits. I have an executable
program that accept one parameter (CALLERID) and return customer status
from the database server which can be printed in the console.
#./retrive 011747378
Kyle Kienapfel wrote:
> On Sun, Jul 25, 2010 at 8:18 AM, Muro, Sam
> wrote:
>> I am having a problem understanding the way to retrieve some parameters
>> to
>> asterisk via AGI or what ever method that fits. I have an executable
>> program that accept one parameter
Steve Edwards wrote:
> On Sun, 25 Jul 2010, Muro, Sam wrote:
>
>> I am having a problem understanding the way to retrieve some parameters
>> to asterisk via AGI or what ever method that fits. I have an executable
>> program that accept one parameter (CALLERID) and return
Kyle Kienapfel wrote:
> On Sun, Jul 25, 2010 at 9:04 AM, Muro, Sam
> wrote:
>> Kyle Kienapfel wrote:
>>> On Sun, Jul 25, 2010 at 8:18 AM, Muro, Sam
>>> wrote:
>>>> I am having a problem understanding the way to retrieve some
>>>> parameters
Steve Edwards wrote:
>>> On Sun, 25 Jul 2010, Muro, Sam wrote:
>>>
>>>> I am having a problem understanding the way to retrieve some
>>>> parameters to asterisk via AGI or what ever method that fits. I have
>>>> an executable program that ac
28 matches
Mail list logo
