Kanuri, Seshu (Company IT) wrote:
Does anyone know how Polycom 500s will be able to update their time. My
setup for a time sync with Public domain Time servers is not successful.
Seshu
We had a user with a Sonic Wall Firewall who needed to set the snpt
server to the IP address of his
Andrei (MPI) wrote:
Hi Jared,
Thank you for your reply. That server is for asterisk only, things like
X-windows and samba were not even installed there. I limited what I
could from system point of view. Digium support has qualified the box as
clean for TDM400P operations.
It is not clicks and
Steven Wang wrote:
Hello
I try to set up voicemails for extension. When VoicemailMain gets called, it
prompts for mailbox and password. It seems not able to read from the phone.
So the authentication always fails.
I desparately need help to understand what is wrong. Here is a part of my
Matthew Boehm wrote:
Can someone else confirm that your phone does not recieve MWIs when using
SIP and RealTime?
I can confirm that. Polycoms and CVS-Head from a month or so ago. I
haven't tried it since.
___
Asterisk-Users mailing list
[EMAIL
Hi, everyone:
I was playing with the ODBC configuration to pull sip and voicemail
config info from a MSSQL2000 server. Everything works great except for
the message waiting indication on the Polycom phones (all three models).
If I move the sip registration info to sip.conf, the MWI starts
Wiley E. Siler wrote:
I have a solution that allows me to assign a soft key with no problems.
However, it seems like a waste the the hard button labeled Voice Mail is
not dialing right into voice mail. Is there a known way yo do this? I
have tried everything in the manual but it doesn't seem to
Wiley E. Siler wrote:
Hello All,
I have some Polycom IP 500 phones that I would like to have configured
for direct dialing to our voice mail system. So far I have been unable
to get the hard button labeled Voice Mail to connect to Asterisk without
first passing through the message center
Jorge Mendoza wrote:
Hi,
I'm testing a Polycom IP600.
With firmware version 1.1 the phone reboots at any time.
With firmware version 1.2, the first reboot was an endless reboot. Then
I moved the phone to another lan port, then it worked fine. Then I
installed again in the initial lan port and
Tomica Crnek wrote:
Hi everyone,
I have to test few models of SIP IP phones with Asterisk. I have seen on
voip-info.org that there are lot of phones that work ok with Asterisk.
But, I want to ask for suggestion - which models are the best for Asterisk?
We have a dozen or so Polycom IP 500's
Matthew John Darnell wrote:
Aloha,
Does anyone have a good source for Polycom SoundPoint® IP 600/500/300
phones?
http://www.reviewvideo.com/ Usually has them in stock. I've had good
luck ordering from them.
-rb
___
Asterisk-Users mailing list
Brian D'Arcy wrote:
Hello all,
Im having a nightmare of a time trying to get stable results with SIP
clients on Asterisk. I cant seem to find a configuration that works!
In our office, we run a Sonicwall Pro 200, which is a sip aware,
stateful firewall.
We've discovered that certain
Hi, all
We're using Asterisk CVS 3-19-04 with four polycom IP600s. The work
very well and we're quite happy with them. They register fine and all
four are able to place and receive calls, BUT two of them are behind NAT
routers and when they place a call on hold, the call is dropped within 5
router/voice server (using only IP voice trunks) we've been having some
issues (which are being worked on...Thanks Mark)
Russ Beaupre, P.E.
BoTech Communications Corp.
- Original Message -
From: Ray Burkholder
To: [EMAIL PROTECTED]
Sent: Wednesday, October 29, 2003 9:01 AM
Subject
I had a similar problem when using an AS5300 with SIP. I'm not familiar
with the 7940, but on the AS5300 there is a Voice-Activity-Detection
setting. Disabling the VAD on the AS5300 corrected the SIP music on hold
problem.
Russ Beaupre, P.E.
- Original Message -
From: Babak Pasdar
14 matches
Mail list logo
