Thanks Tzafrir,
But those patches do not work with the current 1.2. The asterisk_uk
patch fails on 3 accounts with chan_zap.c and callerid.h
The zaptel patch seems to be ok.
Vassilis
At 09:00 04/12/2005, you wrote:
On Sun, Dec 04, 2005 at 08:14:07AM +, Vassilis Konstantinou wrote
As I am trying to compile a fresh copy of the current svn release of
Asterisk 1.2 for a UK system with a combination of X100 and TDM
cards, can a kind soul email me the CLID patches for 1.2?
Many thanks
Vassilis
___
--Bandwidth and Colocation provid
Steve,
The X100P card works ok in UK (I have 3 at the moment). The only problem I
encountered with it was when I had my SKY box connected to the same line.
This caused random hangups.
Apart from that the card works ok and the UK callerid patch is fine for
detecting the BT ids.
I hope this
Hmmmyes but last time I played with my FXO module on the TDM400 could
not detect hangup properly (that is on a London BT line). Has this been
fixed? I keep an eye on the CVS but I have not seen any fixes for that.
Maybe I missed it.
Vassilis
Well, the official line is as Mr. Spencer has
Hello everybody,
I recently got a new phone line from Bulldog-C&W (UK). Needless to say
that I have connected phone line to my Asterisk system. All seems ok but it
does not detect hangups. When the caller hangs-up, the Bulldog line gives a
continues tone for a few seconds and then it goes silen
Just to answer my own question so that this loop is closed and hopefully
others who suffer from the same problem may find this useful.
The problem in the end had nothing to do with Asterisk of the X100P or at
least not directly. After pulling my hair for months and checking various
bits of code
OK Some more information.
I have changed interupts for the 2 X100Ps and the problem did not go away.
Looking at the detailed debug information I always get the following from
before the disconnect:
Jan 9 12:13:40 DEBUG[1992]: Exception on 17, channel 1
Jan 9 12:13:
Thanks for the reply Bill.
I am aware of the interrupts problem. To solve it I have already disabled
my serial ports freeing up interrupts 3 and 4 and these are allocated to
the two cards. This was done 2 months ago and has not solved the problem.
Is there any way that something can wake up ever
This one is driving me crazy. So any suggestions will be very welcome.
My setup:
Suse Linux 9.0 (Pentium 4, 1GB)
Asterisk: current stable (1.0.3?) - tried the head CVS before Christmas but
did not fix it
2 X100P clones - one for a UK BT line, one connected to an ATA186
configured for a UK BT Broa
Is it possible for someone to post the UK CID patch for the latest CVS. The
one I have fails to patch channels/chan_zap.c?
Many thanks
Vassilis
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/aste
Well.. subject says it all really.
I have a TDM with 2 FXS modules and 1 FXO and a X100P.
If I load teh zaptel and wctdm drivers. Asterisk sees the TDM ports fine
but not the X100P
I have tried several combinations of port numbering but can some kind
person with a similar setup to send me the co
I compiled version 1.0.3 over teh weekend on a Suse 9.1 box. It was a clean
installation straight out of the SUSE cds. Make sure that the kernel
sources are loaded and that you do a full online update before you proceed.
Asterisk compiles without any problems.
Vassilis
At 17:44 13/12/2004, you
Hello!
Is it possible for somebody to email me the patch for the UK callerid (for
the X100P cards). I know that the TDM100P patches are included but .. I
still use the X100Ps
Many thanks
Vassilis
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http:/
I have the same problem. My setup is:
Suse 8.0 with 2 single FXO cards with 2 lines coming in and 1 ATA186
providing the connection to two analogue phones.
What I get is an almost random hung up during calls (both incoming and
dialed). Sometimes tha call can last for 30 minutes without any probl
same.
Everything else seems to be ok.
Vassilis
At 10:24 22/07/2004, you wrote:
Vassilis Konstantinou [EMAIL PROTECTED] wrote:
> I have an Asterisk X100 card going through the master socket of an
> engineer installed ADSL connection. Up to this morning all was trouble
> free. Then BT up
I am a very happy Asterisk user/installer for the last couple of months. I
regularly compile teh latest CVS. I got RC1 working and I as using the UK
patches for the BT caller ID with no problems
...that is until this morning :-(
I have an Asterisk X100 card going through the master socket of
Hello everybody,
I am trying to setup asterisk to redirect international calls via a carrier
which uses a fixed price tel number. The scenario is
Dial 087..something (UK number)
Pause for answer at the other end
Send required telephone number 003..etc followed by #
What is the easiest way of doin
Thanks for the reply Greg,
The definition for the console is
[globals]
;CONSOLE=Console/dsp; Console interface for demo
CONSOLE=Zap/1
so if I am mistaken I have commented out the dsp and I am using Zap/1 the
X100P card. Is this ok?
the clock is 123 so dialing 9123 shou
I have been struggling with my Asterisk setup for 3 days now and I think I
have done well...apart from the small detail that I cannot dial out on my
phone (PSTN) line.
My setup is:
Suse Linux 9.0
1 fxo card connected to a BT(UK) line
1 Cisco ATA186 sip v3.0 with two analogue phones attached to i
Excuse the ignorance but is there an easy way of interfacing the ATA186 as
supplied by BT (UK) for their Broadband-voice service to the Asterisk or do
I need to reflash it with the standard SIP firmware?
Best regards
Vassilis
___
Asterisk-Users mailing
Just to answer my own question (for the benefit of future generations :-)
My setup needed installation of anything that had to do with postgresql,
and webdot (for the docs). Now it has compiled ok and so far looks ok.
Vassilis
At 00:01 30/05/2004, you wrote:
Hello Everybody...
probably this is an
Hello Everybody...
probably this is an FAQ item but I can't find it anywhere so here it goes.
I am trying to compile the latest CVS release of Asterisk under Suse 9.0
zaptel and libpri compile without any problems but when I do a 'make
install' in asterisk, it compiles ok until it reaches
the c
22 matches
Mail list logo