Anybody know if there is a way to get one Asterisk
server to report CDR information to another Asterisk
server?
I have a local Asterisk server and a remote Asterisk
server. They talk via IAX2. I have calls that go
as follows:
PSTN-remote server-IAX2-local server-IP phone
Damon Estep wrote:
Use cdr_mysql
Log your CDRs to a common database
Query as needed from either server using realtime() or from an external
app
Yeah, I thought about that. If it works how I think it would
work though I would have two CDR records for one call though.
I would have one record
Maybe someone should make a bittorrent? I will contribute some BW
if there is a torrent.
Steve
Kenneth Shaw wrote:
To be Slashdotted within 30 minutes.
-Ken Shaw...
On Thu, 2004-09-23 at 07:28, Lex Lethol wrote:
Hi,
Reporting from Astricon, Mark uploaded the 1.0 release while giving
his speech
I have the setup you described working somewhat. You *will*
need a T1 crossover(at least I did). You also have to be careful about what
the Definity is doing. After programming my Definity my CSU
liked to stay in the loop state even though I put the thing in service.
To compound the matters it
I would start with the basics.
Are you sure the T1 is even operating correctly?
Any errors/slipped seconds, etc?
Maybe they haven't configured their end correctly yet?
It almost sounds as if they have their end looped. I don't
think Zaptel hardware can detect these.
Just some ideas
Steve
Jeff
Probably best to use what came with your distro.
Steve
Robert Boardman wrote:
Hi, can anyone recommend a Linux based TFTP server to go on an
asterisk box?
Thanks in advance
Robb
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
Hello,
I am trying to set up some Cisco 7940G phones with the
3com POE injectors. I have the 3CNJPSE24 power injector,
this is the rackmountable 24 port injector. My question is
does anyone know how to serial console into these things?
I have tried just about every cable setup I can think of
This may be a little to far into PBX land but...
Anyone know of a place where there are good examples of how
to configure the Definity PBX stations with PRI? I currently have a T1
between a Definity and Asterisk. It is currently doing robbed-bit
signalling but
I would like to do PRI. I can
Are you trying to change the password on the phone or the
password it sends to Asterisk to authenticate with? To change
the password to the phone you need to put:
phone_password: somepassword
in either the SIPMAC.cnf or the SIPDefault.cnf, depending how
global you wish to make the password.
Depends if what you have in OS79XX.TXT is different then
what is running on your phone. If it isn't it won't bother to touch
the image files, if it is then it will try to load whatever image
you have specified in OS79XX.TXT.
So far I have been unable to tell the phones to boot out of anything
but
10 matches
Mail list logo
