Hi guys,
First of all, I know that this server must be upgraded asap, I'm just
wondering if anyone of you has already faced this problem and , if so, would
the upgrade solve my problems...
CAPI version 0.6
Asterisk 1.2.5
AGI scripts are being used
Main problems:
-Dropped Calls
- ps aux | grep
Hello,
I have problem with capi, I can't install it. I have putted all info what I
did and what I get :). I think you can suggest me how to solve this
problem.and thanking you in anticipation. I have ISDN Frtiz!Card PCI
v2.1and I want to install it to my ubuntu box (kernel:
2.6.17-10-server).
I think you are mixing something here. The FritzCard is not a B1, so you
don't need the b1 modules, the firmware and the /etc/capi.conf.
You can either use the FritzCard driver (binary modules from AVM), or you
use mISDN (which is also already loaded according to your lsmod).
When using mISDN,
Hi List,
I am experiencing an issue with a server running asterisk; I installed an
AVM FRITZ card and configured it to work with the capi module.
Once everything is installed the card works perfect; the issue is that every
time I reboot the machine I have to re install the capi4k-utils
Hi List,
I am experiencing an issue in a server that I have installed asterisk;
configured an AVM FRITZ card to work with the capi module.
Once istalled the card works perfect; however every time I reboot the
machine I found that I have to re install the capi4k-utils before I can load
On Tue, 17 Oct 2006, Tim Sharp wrote:
I have 23 CAPI channels defined and normally multiple channels are in use
during the day for outbound calling. The problem is that every 3 or 4
months one of the channels becomes unavailable and then no calls can come
in or go out on any of these
PROTECTED] Behalf Of Armin
Schindler
Sent: Wednesday, October 18, 2006 3:24 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] CAPI channel not available but nobody is
usingthe system
On Tue, 17 Oct 2006, Tim Sharp wrote:
I have 23 CAPI channels defined
time.
Tim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Armin
Schindler
Sent: Wednesday, October 18, 2006 3:24 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] CAPI channel not available but nobody
I have 23 CAPI channels defined and normally multiple channels are in use
during the day for outbound calling. The problem is that every 3 or 4 months
one of the channels becomes unavailable and then no calls can come in or go out
on any of these channels. CAPI INFO shows Contr1: 23 B
hi,
we've got a Diva Server BRI-2M PCI, SN:3485 card in our asterisk server.
we use the latest divas4linux-melware-3.0.g-106.628.1-1 driver for it.
the card is connected to a Bosch Integral33 PBX. the two system
connected with an S0 line in order the two pbx be able to call
eachother. when we call
For those with an Fritz!board, have a look at:
http://www.fltronic.de/~olly/avm/
--
pgp-id: 926EBB12
pgp-fingerprint: BE97 1CBF FAC4 236C 4A73 F76E EDFC D032 926E BB12
Registered linux user: 75761 (http://counter.li.org)
___
--Bandwidth and Colocation
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Avi Miller
Sent: 12 April 2006 22:38
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] CAPI Installation Eicon Diva Server
[EMAIL PROTECTED] wrote:
Asterisk says it has 30 capi
On Wed, 12 Apr 2006 [EMAIL PROTECTED] wrote:
Hi
I've got a dell 2550 with an Eicon Diva server PRI card plugged into it.
I can call out using the acopy2 test utility.
I'm having trouble with asterisk making calls however... my capi.conf
and modules.conf looks correct by the wiki
Armin Schindler wrote:
The configuration is as easy as with BRI lines. Can you provide more (like
your confs and verbose/debug output)?
Also (this isn't directed at you Armin, but I found your email to reply
off of to maintain the threading), I created a Wiki page over at the
freePBX
Hi
I've got a
dell 2550 with an Eicon Diva server PRI card plugged into it. I can call out
using the acopy2 test utility.
I'm having
trouble with asterisk making calls however... my capi.conf and modules.conf looks correct by the wiki instructions - does anyone have any advice on where
[EMAIL PROTECTED] wrote:
Asterisk says it has 30 capi channels available, but my mistake may be
in configuring the trunks...
When I was debugging my Eicon Diva 4-BRI board, I found it useful to
play with extensions_custom.conf (in AMP) just to ensure I got the
Custom Dial String absolutely
List (and Armin)
My set up is as follows:
RedHat Fedora Core #3
box
AVM C4 card
Asterisk 1.2.1
chan_capi-cm-0.6.1 (with patches
from Armin)
2 x ISDN2e line (4 channels)
bonded in P2P mode - British Telecom
I have, before today, had two occasions where the
CAPI sub-system just
Hello Armin,
On Mo, 2 Jan 2006 Armin Schindler wrote:
I don't think it is necessary to exclude it. Just build chan_capi-cm and
overwrite chan_capi.so as well as remove the app_capi* modules from your
installation.
Armin
Many thanks, it is working.
Karsten
Hello,
first of all, I say Happy New Year to this list!
While using asterisk 1.2.1 with bristuff-0.3.0-PRE-1d (which includes
chan_capi 0.4.0-PRE1), I ran into the following problem.
I want to signal busy to an incoming call, but that doesn't work.
The dialplan looks like this:
exten =
On Mon, 2 Jan 2006, Karsten Wemheuer wrote:
Hello,
first of all, I say Happy New Year to this list!
While using asterisk 1.2.1 with bristuff-0.3.0-PRE-1d (which includes
chan_capi 0.4.0-PRE1), I ran into the following problem.
I want to signal busy to an incoming call, but that doesn't
Hello Armin,
On Mo, 02.01.2006 Armin Schindler wrote:
On Mon, 2 Jan 2006, Karsten Wemheuer wrote:
Hello,
first of all, I say Happy New Year to this list!
While using asterisk 1.2.1 with bristuff-0.3.0-PRE-1d (which includes
chan_capi 0.4.0-PRE1), I ran into the following problem.
On Mon, 2 Jan 2006, Karsten Wemheuer wrote:
Hello Armin,
On Mo, 02.01.2006 Armin Schindler wrote:
On Mon, 2 Jan 2006, Karsten Wemheuer wrote:
Hello,
first of all, I say Happy New Year to this list!
While using asterisk 1.2.1 with bristuff-0.3.0-PRE-1d (which includes
Hi,
* Armin Schindler wrote on 24.12.2005 (13:18):
I suggest you use chan_capi-cm from sourceforge.net instead of old
0.3.5/0.4.0. And when installing a new version, remove old files from
installation like app_capi*
done that. Now I got a bunch of other problems. I don't
think they're
On Sat, 31 Dec 2005, Sascha Andres wrote:
Hi,
* Armin Schindler wrote on 24.12.2005 (13:18):
I suggest you use chan_capi-cm from sourceforge.net instead of old
0.3.5/0.4.0. And when installing a new version, remove old files from
installation like app_capi*
done that. Now I got a
Hi,
* Armin Schindler wrote on 31.12.2005 (12:47):
CAPI itself is very easy, but the card drivers are different...
What problems do you have ?
Every application (not only asterisk) complains that capi is
not loaded. I do have two choices for my isdn card: AVM B1
PCMCIA and Eicon Diva Mobile
On Sat, 31 Dec 2005, Sascha Andres wrote:
Hi,
* Armin Schindler wrote on 31.12.2005 (12:47):
CAPI itself is very easy, but the card drivers are different...
What problems do you have ?
Every application (not only asterisk) complains that capi is
not loaded. I do have two choices for
Hi,
* Armin Schindler wrote on 31.12.2005 (15:26):
The open-source diva driver (divas) does not support the Eicon Diva Mobile,
the Diva Server Cards are available only.
I don't know if the drivers from Eicon do support this card.
But anyway, I don't think this card is capable doing NT-mode.
On Sat, 31 Dec 2005, Sascha Andres wrote:
Hi,
* Armin Schindler wrote on 31.12.2005 (15:26):
The open-source diva driver (divas) does not support the Eicon Diva Mobile,
the Diva Server Cards are available only.
I don't know if the drivers from Eicon do support this card.
But anyway, I
Hi,
I got the newest asterisk (SVN-trunk-r7413) that compiled
fine without any errors or warnings. I got chan_capi 0.4
PRE1 and modified the sources together with a friend so
ina way that no error or warning occurs.
When I try to load chan_capi the following error is printed
and asterisk quits:
On Sat, 24 Dec 2005, Sascha Andres wrote:
Hi,
I got the newest asterisk (SVN-trunk-r7413) that compiled
fine without any errors or warnings. I got chan_capi 0.4
PRE1 and modified the sources together with a friend so
ina way that no error or warning occurs.
When I try to load chan_capi
Hello,
Using * 1.2.1 with chan_capi CVS on a Diva server I am mostly happy.
However when a phone redirects a call (user forward) and all ISDN
channels are busy, the call goes out through an IAX connection and it
takes a few seconds to get a ring state from the remote * server. This
makes the
Did you load the kernel module 'capi.o' as well? This is the module which
provides the node /dev/capi20.
If you use mISDN, you don't need capiinit, which is for AVM drivers only.
Armin
On Sat, 12 Nov 2005, MBIT Technologies wrote:
Hi Guys
I'm having a problem getting CAPI to work on
Hi Guys
Im having a problem getting CAPI to work on my
Traverse NetJet card.
CAPI is enabled in the kernel and Im using the mISDN
drivers with the NetJet patch. I cant seem to get astcapi to load
Heres the output im getting
Nov 12 21:18:36 VERBOSE[4011]:
== Registered
Hi!
I am running Asterisk (1.0.8) on gentoo (2.6.13-gentoo-r5), with AVM C2
ISDN card. capiiinit works OK, capiinfo shows card is up and running
with CAPI OK, but asterisk refuses to load the capi-cm module
(chan_capi-cm, 0.5.4) giving the warning
CAPI not installed, CAPI disabled!.
Any hints of
Hi!
I am running Asterisk (1.0.8) on gentoo (2.6.13-gentoo-r5), with AVM C2
ISDN card. capiiinit works OK, capiinfo shows card is up and running
with CAPI OK, but asterisk refuses to load the capi-cm module
(chan_capi-cm, 0.5.4) giving the warning
CAPI not installed, CAPI disabled!.
Any
Armin Schindler wrote:
Correct permissions to access /dev/capi20 for Asterisk?
Duh! Of course it had to be something as trivial as that! Thanks!!
Julf
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Hi,
I'm currently using chan_capi-cm-0.6, with the following capi.conf:
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8
language=de
[ISDN1]
msn=8304490
incomingmsn=8304490
isdnmode=msn
group=1
controller=1
softdtmf=1
context=demo
echosquelch=1
echocancel=yes
echotail=64
Stefan Günther schrieb:
With the above configuration the display always shows 8304490.
I've tried to change the number in the dialplan, but this doesn't change
anything:
exten = _90[23456789].,1,SetCIDNum(83044912)
Try to use SetCallerID instead of SetCIDNum and see if it helps.
exten =
Hi!
msn=8304490
incomingmsn=8304490
Each user has a different numer, e.g. 83044910, 83044911, 83044912 and
so on.
This number should appear on the display of the called party, but how do
I configure this?
With the above configuration the display always shows 8304490.
I've tried to
On Tue, 18 Oct 2005, Stefan Günther wrote:
..
Each user has a different numer, e.g. 83044910, 83044911, 83044912 and
so on.
This number should appear on the display of the called party, but how do
I configure this?
With the above configuration the display always shows 8304490.
I've tried to
Armin Schindler wrote:
What kernel do you use? If it's 2.6.10 or newer, then make sure you use new
chan_capi-cm from sourceforge.net. Older chan_capi is buggy.
Thanks for the hint. I am using kernel 2.6.12. Changing to the
chan_capi-cm solved the problem... Looks like I could have saved
I have installed a Fritz card which I use with chan_capi. If the card is
CALLED, everything works perfectly well.
BUT: If the card is CALLING, it only sends audio but does not receive
it. I have already changed the card, the remote devices etc. I am
running out of ideas.
Does anybody know
On Wed, 17 Aug 2005, Arik Funke wrote:
I have installed a Fritz card which I use with chan_capi. If the card is
CALLED, everything works perfectly well.
BUT: If the card is CALLING, it only sends audio but does not receive it. I
have already changed the card, the remote devices etc. I am
On Mon, 25 Jul 2005 [EMAIL PROTECTED] wrote:
Hello All,
I installed an eicon diva server. I have the channels up, however my
issue is that the sound is unbearable. The signalling seems to work ok,
but its as if the gain is so high that its confusing the card. For
example, you can hear the
Hello All,
I installed an eicon diva server. I have the channels up, however my
issue is that the sound is unbearable. The signalling seems to work ok,
but its as if the gain is so high that its confusing the card. For
example, you can hear the ivr prompts, but combined with insane noise
Hi all,
chan someone who has tried BOTH chan_capi and chan_mISDN with a
passive Frtiz!Card PCI comment on one versus the other. Which had
better sound quality.
Thanks
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
Hi list,
I am using Asterisk in a small systems with an AVM C4 card, we first had
one ISDN line, (ptmp), which we upgraded to
2 ISDN with 1 number (so no DID's) This runs in ptp mode.
Calling out works fine on all 4 channels, but when I call in, I get
*CLI Jul 13 09:44:59 ERROR[13635]:
On Thu, 14 Jul 2005, asterisk wrote:
Hi list,
I am using Asterisk in a small systems with an AVM C4 card, we first had one
ISDN line, (ptmp), which we upgraded to
2 ISDN with 1 number (so no DID's) This runs in ptp mode.
Calling out works fine on all 4 channels, but when I call in, I get
I have an Asterisk server connected to ISDN2 lines off a PBX (Avaya) using 4
port Eicon Diva card. All works fine, but i'd like calls from the PBX to
Asterisk to show the Caller ID name and not just the number. I know this
information is being presented by looking through the ISDN trace for the
On Wed, 29 Jun 2005, louis g wrote:
I have an Asterisk server connected to ISDN2 lines off a PBX (Avaya) using 4
port Eicon Diva card. All works fine, but i'd like calls from the PBX to
Asterisk to show the Caller ID name and not just the number. I know this
information is being presented by
On 15:54:12 June 29, 2005 Armin Schindler [EMAIL PROTECTED] wrote:
On Wed, 29 Jun 2005, louis g wrote:
I have an Asterisk server connected to ISDN2 lines off a PBX
(Avaya) using 4 port Eicon Diva card. All works fine, but i'd like
calls from the PBX to Asterisk to show the Caller ID name
Hi,
if you are using the QSIG protocol for the interconnection between
Asterisk and the PBX, I have maybe a solution.
for the X100P you are using Zapata driver of asterisk. (with the
switchtype QSIG right?)
But for the eicon you use the capi module?
Caller Name within QSIG is standardized as
On Wed, 29 Jun 2005, Christian Händel wrote:
Hi,
if you are using the QSIG protocol for the interconnection between Asterisk
and the PBX, I have maybe a solution.
for the X100P you are using Zapata driver of asterisk. (with the switchtype
QSIG right?)
But for the eicon you use the capi
Hi
all,
I've
recentrly starting to play around with *, when all I wanted is to configure an
fritz ISDN card with [EMAIL PROTECTED]
Currently
I'm stuck at the phase of what do I do with capi after everything is installed.
I'm
trying to understand how to setup incoming and outgoing
Discussion
Betreff: Re: [Asterisk-Users] CAPI on ptp with variable length digits in
phonenumber
hi again,
just ignore my mentioning of the sirrix-cards, just realised you have a
PRI, i overread it and thought you had a BRI. so i think your last hope is
a zaptel-card.
regards,
Am Freitag, 6
Hi!
we have a german PtP PRI connection here.
our old telephone system was programmed to accept digits by variable
length.
so our MSN, assigned my telco is, lets say: 123
and we can use first digit from 0-4. and every further digit like we
want.
means:
123-1
123-2345
123-44
till
hi back,
we had this sort of problems (and some other ones... sigh) with an eicon diva
chan_capi in austria.
rant mode=on
unfortunately we never got around to fix this spaghetti of a code in
chan_capi.c to work as intended
(it takes the first session_setup it gets from the line and
hi again,
just ignore my mentioning of the sirrix-cards, just realised you have a PRI, i
overread it and thought you had a BRI. so i think your last hope is a
zaptel-card.
regards,
Am Freitag, 6. Mai 2005 13:04 schrieb Sebastian Buntin:
Hi!
we have a german PtP PRI connection here.
our
Nachricht-
Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von bladerunner
Gesendet: Freitag, 6. Mai 2005 14:01
An: Asterisk Users Mailing List - Non-Commercial Discussion
Betreff: Re: [Asterisk-Users] CAPI on ptp with variable length digits in
phonenumber
hi again,
just ignore my
,
Sebastian
-Ursprüngliche Nachricht-
Von: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Im Auftrag von bladerunner
Gesendet: Freitag, 6. Mai 2005 14:01
An: Asterisk Users Mailing List - Non-Commercial Discussion
Betreff: Re: [Asterisk-Users] CAPI on ptp with variable length digits
Hello
I have capi 0.3.5 with fritz card and:
When i try to dialout i have this message in from capi debug :
CAPI Debugging Enabled
CLI -- Executing AnswerSIP/478-3f3f in new stack
--
Since capi is not even really supported by the guy who wrote it I'd
suggest you get a zaphfc card, like the I-tec ISDN-128, which could
simplify your task a lot.
:)
cheers Micha
On 4/21/05, Pawe Staszewski [EMAIL PROTECTED] wrote:
Hello
I have capi 0.3.5 with fritz card and:
On Thu, 2005-04-21 at 12:09 +0200, Pawe Staszewski wrote:
Hello
I have capi 0.3.5 with fritz card and:
When i try to dialout i have this message in from capi debug :
CAPI Debugging Enabled
*CLI -- Executing Answer(SIP/478-3f3f, ) in new stack
-- Executing
SNIP
== DISCONNECT_IND PLCI=0x101 REASON=0x3481
== No one is available to answer at this time
How changing from CAPI to a zaphfc card will correct
this error I don't
know, and problably neither does the person who
suggested it.
REASON 0x3481 is Unallocated (unassigned) number. =
Wrong
Hello
I live in poland and :
local numbers are: 752 7 digits
zone prefix: 32
country prefix: 48
And i must add that i am behind a local PBX Alcatel 4200E
Configured isdn port with msn 7523071
Why
Pawe Staszewski wrote:
Hello
I live in poland and :)
local numbers are: 752 (7 digits)
zone prefix: 32
country prefix: 48
And i must add that i am behind a local PBX (Alcatel 4200E)
Configured isdn port with msn 7523071
Why dial in is working but dial-out not ... ??
maybe your local PBX
Hello
i try with 0 and
-- Executing AnswerSIP/478-c9a2 in new stack
-- Executing DialSIP/478-c9a2 CAPI/7523071:07522333 in new stack
-- data = ""
-- capi request omsn = 7523071
== found capi with omsn = 7523071
Pawe Staszewski wrote:
Hello
i try with 0 and
-- Executing Answer(SIP/478-c9a2, ) in new stack
-- Executing Dial(SIP/478-c9a2, CAPI/7523071:07522333) in new stack
-- data = 7523071:07522333
-- capi request omsn = 7523071
== found capi with omsn = 7523071
== CAPI Call
On 4/7/05, Thomas Andrews [EMAIL PROTECTED] wrote:
On Thu, Apr 07, 2005 at 10:15:09AM +0200, Thomas Andrews wrote:
I have a Fritz! card set up to use capi, however when incoming calls to
the card are answered, asterisk segfaults.
Have you tried a make clean then make install in the
On Thu, Apr 07, 2005 at 10:15:09AM +0200, Thomas Andrews wrote:
I have a Fritz! card set up to use capi, however when incoming calls
to
the card are answered, asterisk segfaults.
Have you tried a make clean then make install in the chan_capi source
directory make sure the header
I have a Fritz! card set up to use capi, however when incoming calls to
the card are answered, asterisk segfaults. Here is the output of gdb:
#0 0x4014f7af in memcpy () from /lib/tls/libc.so.6
#1 0x081316b0 in ?? ()
#2 0x08130680 in ?? ()
#3 0x40432da6 in pipe_msg (PLCI=257, CMSG=0x405052c0)
On Thu, Apr 07, 2005 at 10:15:09AM +0200, Thomas Andrews wrote:
I have a Fritz! card set up to use capi, however when incoming calls to
the card are answered, asterisk segfaults.
Just for the record, my capi.conf looks like this:
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
Hi,
Philip Hofstetter wrote:
Now may next step has been to enable dialing out with the softphones.
This does not work as expected.
I was able to fix this problems by downgrading from kernel 2.6.11 to
2.6.10. There must be a CAPI-Problem hidden somewhere.
Last saturday was so much fun for me,
Hi!
Can someone help me with a problem I have with CAPI and dialing out
or in? Installed is a B1ISA from AVM.
I have installed chan_capi-0.3.5. In modem.conf I have this entries:
[interfaces]
driver=chan_capi
type=autodetect
dialtype=tone
mode=immediate
msn=144673
device = /dev/ttyI0
device =
On Thu, 2005-03-31 at 10:01 +0200, Andreas Meyer wrote:
REASON=0x3302
This means Protocol error layer 2. Are you able to make outgoing calls
any other way using this card? Do you see anything relevant in 'dmesg'
when you make outgoing calls, or when incoming calls occur?
You don't need to
Hi!
David Woodhouse [EMAIL PROTECTED] wrote:
On Thu, 2005-03-31 at 10:01 +0200, Andreas Meyer wrote:
REASON=0x3302
This means Protocol error layer 2. Are you able to make outgoing calls
any other way using this card? Do you see anything relevant in 'dmesg'
when you make outgoing calls,
i've got a b1 in one of my systems (but a b1rev4, which is pci). it would help
to know
1.) what kernel version (2.4.x, 2.6.x?)
2.) output of capiinfo
3.) output of lspci
4.) output of lsmod
support for capi20 avm b1 is in 2.6 series kernels, only thing needed is
AFAIK to load up the correct
i just noticed your capi.conf. i've got a working capi.conf from one of my
customers:
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8
[interfaces]
isdnmode=ptp
msn=12345
context=in-capi
incomingmsn=*
controller=1
softdtmf=1
devices=2
mode=immediate
notice the isdnmode
Hi!
bladerunner [EMAIL PROTECTED] wrote:
i just noticed your capi.conf. i've got a working capi.conf from one of my
customers:
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8
[interfaces]
isdnmode=ptp
msn=12345
context=in-capi
incomingmsn=*
Hi!
bladerunner [EMAIL PROTECTED] wrote:
i've got a b1 in one of my systems (but a b1rev4, which is pci). it would
help
to know
it's an ISA-card version 2.0
1.) what kernel version (2.4.x, 2.6.x?)
delta:/etc/asterisk # uname -a
Linux delta 2.4.29 #1 Tue Feb 15 11:53:57 CET 2005 i686
bladerunner [EMAIL PROTECTED] wrote:
i've got a b1 in one of my systems (but a b1rev4, which is pci). it would
help
to know
1.) what kernel version (2.4.x, 2.6.x?)
2.) output of capiinfo
3.) output of lspci
4.) output of lsmod
support for capi20 avm b1 is in 2.6 series kernels,
Hi,
after having read so much about Asterisk, I went on and tried out to
create a little sample-setup.
I'm using a Fritz Card USB with the AVM Capi Driver and two X-Lite
Softphones.
Dialing between the softphones makes no problem.
Calling the MSN fron an external phone also works. I'm getting
Philip Hofstetter wrote:
capi.conf:
[..]
[interfaces]
msn=0442607572
incomingmsn=*
controller=1
softdtmf=1
accountcode=
context=demo
devices=2
extension.conf:
[ch-fest-netz]
exten = _0[1-9].,1,Dial(CAPI/0442607572:b${EXTEN},30)
Are you sure 044260xxx is your MSN? In germany the MSN is your phone
Philip Hofstetter wrote:
msn=0442607572
incomingmsn=*
There's already been a suggestion to drop your area code. That may or
may not work in Germany as I don't know how MSNs are presented. In
Holland I had to have
msn=201234567
Where the number would normally be quoted as 0201234567, ie dropping
Some suggestion about how detect busy channels in a installation with 2 cards (AVM Fritz)?
Can't find info about groups in capi channels. Need to dial out trought some of the 4 avalaible channels.
Better try it with zaphfc ?
Adrià Vidal
___
Hi all,
I have two questions regarding CAPI. Excuse the fact that they are
very 'newbie' in nature, but the CAPI documentation is wafer thin!
Firstly I have four BRI adapters (all trunks and controlled by CAPI) in
my * box and I would like to know whether I can group these together
for
Lastly, my capi.conf (as below) only defines one controller as this is
what we are testing with. My understanding is that the interface block
(starting with 'msn=470' and ending with 'devices=2') needs to be
repeated for each of the four BRI adapters, but with the correct MSN for
each.
If you
Thanks Elmar. I assume it is up
to the carrier to determine the MSN for each connection?
D.
FFF Managed Technology Ltd
60 Cook St
P.O. 6368 Wellesley St
Auckland
t +64 9 356 2911
f +64 9 358 9070
m +64 21 415 297
w www.fff.co.nz
Elmar Haneke wrote:
Lastly, my capi.conf (as below) only
Hi all,
Can anyone help me with a CAPI problem that I am having. I've got one
BRI trunk (will have 4 when it goes into production) and when one of
the B channels is in use (i.e. there is an incoming/outgoing call in
progress) I can't get Asterisk to answer the other ringing B channel
Hello! I am a newbie with asterisk, I´d like to install capi on FC3, I´ve
tried to follow a little howto
(http://voip-info.org/wiki-Asterisk+Linux+Fedora), but it is for FC1, and
when I do a modprobe fcpci it fails (module not found).
Please some help!!
Hi,
Regarding capi debug, I don't know how
to translate reasons like 0x3302 or infos like 0.I didn't find any
'translator' googleing capi debugging. Do you know about any 'translator' for
this or should I be as clever as to know what a reason 0x3302 is?
What is this debug for if I can't
I'm going to answer myself. I don't know If
somebody already did it because I'm using digest mode.
CAPI specification is available at http://www.capi.org/, It explains all the
commands and associated identifiers. Now I know that reason0x3302 in
DISCONNECT_IND means Protocol error, Layer 2.
Hi,
I have following problem. Asterisk is connected to ISDN router on BRI
interface. ISDN PBX is connected to another channel of BRI interface. Now
I'd like to route all incoming calls first to Asterisk and then if caller
wants to talk to extension on ISDN PBX then I'd like to route call to
On Tue, 15 Feb 2005 10:45:16 +0100, Robert Rozman [EMAIL PROTECTED] wrote:
Hi,
I have following problem. Asterisk is connected to ISDN router on BRI
interface. ISDN PBX is connected to another channel of BRI interface. Now
I'd like to route all incoming calls first to Asterisk and then if
Robert Rozman wrote:
I have following problem. Asterisk is connected to ISDN router on BRI
interface. ISDN PBX is connected to another channel of BRI interface. Now
I'd like to route all incoming calls first to Asterisk and then if caller
wants to talk to extension on ISDN PBX then I'd like to
I own a ME600 EPIA Mini-ITX main board with the latest Debian distro
(kernel 2.6.8) with isdnutils-base, libcapi20-dev, libcapi20-2,
isdnactivecards installed. I have a QuadBRI module by Junghanns with
bristuff-0.2.0-RC3a (with asterisk-1.0.3, zaptel-1.0.3 and
libpri-1.0.3), and
On 11:52, Tue 15 Feb 05, A. Peverelli wrote:
I own a ME600 EPIA Mini-ITX main board with the latest Debian distro
(kernel 2.6.8) with isdnutils-base, libcapi20-dev, libcapi20-2,
isdnactivecards installed. I have a QuadBRI module by Junghanns with
bristuff-0.2.0-RC3a (with asterisk-1.0.3,
Are you running asterisk as user asterisk ?
If so, you need to add this user to the dialout group.
Otherwise it won't have access to the modem.
hope this helps.
I'm running asterisk with user 'root'. Asterisk user is in the dialout
group and I try to start asterisk as user asterisk, with the
A. Peverelli wrote:
I own a ME600 EPIA Mini-ITX main board with the latest Debian distro
(kernel 2.6.8) with isdnutils-base, libcapi20-dev, libcapi20-2,
isdnactivecards installed. I have a QuadBRI module by Junghanns with
bristuff-0.2.0-RC3a (with asterisk-1.0.3, zaptel-1.0.3 and
Peer Oliver Schmidt posde-at-theinternet.de |Asterisk/Maestro| wrote:
A. Peverelli wrote:
I own a ME600 EPIA Mini-ITX main board with the latest Debian distro
(kernel 2.6.8) with isdnutils-base, libcapi20-dev, libcapi20-2,
isdnactivecards installed. I have a QuadBRI module by Junghanns with
1 - 100 of 204 matches
Mail list logo