Derek Bolichowski wrote:
HI Michael,
You can set this in sip.conf:
session-timers=refuse
I know of this option - it doesn't help, because the provider ignores it
(on some calls) and the call is dropped anyway.
Normally, there is no problem with the timers. And the problem which
occurred
ubject: [asterisk-users] Dropped call after 900s: 481 call/transaction does
not exist and another anomaly during re-invite in timer - full anonymized trace
attached
Hello all!
I can see a strange problem during invite in dialog in the context of timer
handling.
Given is the following incomin
Hello all!
I can see a strange problem during invite in dialog in the context of
timer handling.
Given is the following incoming call from provider at 8.195.88.234 (2@2)
to my asterisk at 28.19.57.152 (1@1):
After 900s suddenly *asterisk* starts the timer reinvite - I would have
expected the
Hello Everyone,
Just getting in a new cisco router, and would really like to get it up and
running as soon
as possible. Everything is configured from what we can see. This is a NAT
setup.
After 2 seconds on a successfully established call we reach retrans max,
and asterisk
disconnects the call.
, 2014 9:28 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Dropped call on new CISCO router for no reason!
Hello Everyone,
Just getting in a new cisco router, and would really like to get it up and
running as soon as possible. Everything is configured from
Hello Eric, I knew this problem all so well however, never knew CISCO sip
alg was enabled by
default. The following settings got us up and going shortly after the email:
no ip nat service sip udp port 5060
ip nat inside source static udp 192.168.2.5 5060 interface Dialer0 5060
access-list 130
On 14-01-06 09:27 AM, Nick Cameo wrote:
Hello Everyone,
Just getting in a new cisco router, and would really like to get it up and
running as soon
as possible. Everything is configured from what we can see. This is a NAT
setup.
After 2 seconds on a successfully established call we reach retrans
...@intuitiveengineering.com]
Sent: Friday, July 10, 2009 1:35 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Dropped Call Problem -- Looking for ideas and a
consultant.
Steve,
Thanks for your thoughts. I am tearing out my last bit of hair on this
one.
We only use
what I can do to get you
more info.
Connor Spiess
Network Specialist
-Original Message-
From: Mark Engelhardt [mailto:ma...@intuitiveengineering.com]
Sent: Friday, July 10, 2009 1:24 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Dropped Call
Hello Everyone.
We have:
Asterisk 1.4.21.2
zaptel-1.4.11
libpri-1.4.5
Sangoma A101D Connected to a PRI
Cicso 7960G phones (About 30 of them)
We have a problem with dropped calls that has going on for a long
time. We get up to 5 dropped calls on a bad day. They all seem to be
incoming
...@intuitiveengineering.com]
Sent: Friday, July 10, 2009 10:58 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Dropped Call Problem -- Looking for ideas and a
consultant.
Hello Everyone.
We have:
Asterisk 1.4.21.2
zaptel-1.4.11
libpri-1.4.5
Sangoma A101D
Discussion
Subject: [asterisk-users] Dropped Call Problem -- Looking for ideas and a
consultant.
Hello Everyone.
We have:
Asterisk 1.4.21.2
zaptel-1.4.11
libpri-1.4.5
Sangoma A101D Connected to a PRI
Cicso 7960G phones (About 30 of them)
We have a problem with dropped calls that has
...@intuitiveengineering.com]
Sent: Friday, July 10, 2009 10:58 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Dropped Call Problem -- Looking for ideas
and a consultant.
Hello Everyone.
We have:
Asterisk 1.4.21.2
zaptel-1.4.11
libpri-1.4.5
Sangoma A101D
10:58 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Dropped Call Problem -- Looking for ideas
and a consultant.
Hello Everyone.
We have:
Asterisk 1.4.21.2
zaptel-1.4.11
libpri-1.4.5
Sangoma A101D Connected to a PRI
Cicso 7960G phones (About
- Non-Commercial Discussion
Subject: [asterisk-users] Dropped Call Problem -- Looking for ideas
and a consultant.
Hello Everyone.
We have:
Asterisk 1.4.21.2
zaptel-1.4.11
libpri-1.4.5
Sangoma A101D Connected to a PRI
Cicso 7960G phones (About 30 of them)
We have a problem
-Original Message-
From: Mark Engelhardt [mailto:ma...@intuitiveengineering.com]
Sent: Friday, July 10, 2009 10:58 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Dropped Call Problem -- Looking for ideas
and a consultant.
Hello Everyone.
We have
I am encountering an intermittent issue where some of my calls are being
dropped. Most of the calls that are made are successful. However, some
calls will be dropped after having been connected for some time.
Each time a call gets dropped, I get output similar to the following in
the Asterisk
Kohler, Jeffrey wrote:
I am encountering an intermittent issue where some of my calls are being
dropped. Most of the calls that are made are successful. However, some
calls will be dropped after having been connected for some time.
Each time a call gets dropped, I get output similar to the
Hi all
We have had Asterisk drop calls every now and then, does anyone know why
this happens? It is seldom but does happen. We have plenty of memory
in the server.
Regards
Doug Reid
Director
Stormcorp Network Solutions (Pty) Ltd
Tel:+27 11 807 1141
Fax:+27 11 807 3504
Mobile: +27 83
do you check irq misses? what is your set up? os? ,kernel?, full
voip?, voip+tdm?
On Fri, 29 Oct 2004 08:54:42 +0200, Doug Reid -Stormcorp
[EMAIL PROTECTED] wrote:
Hi all
We have had Asterisk drop calls every now and then, does anyone know why
this happens? It is seldom but does happen. We
20 matches
Mail list logo
