PROTECTED]
Sent: Sunday, December 19, 2004 2:29 PM
To: [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] Grandstream CallerID
I forgot to ask, since the BT100 can't take characters (only numbers), I
would have assumed
Those suggestions were just for testing, obviously.
iax.conf
[2000]
callerid=My Name 2000
sip.conf
[2002]
type=friend
username=2002
Dialing 2002 from 2000
-- Executing Dial(IAX2/[EMAIL PROTECTED]/3, SIP/2002|20|tT) in new stack
2000 appears on the BT100
: [Asterisk-Users] Grandstream CallerID
Those suggestions were just for testing, obviously.
iax.conf
[2000]
callerid=My Name 2000
sip.conf
[2002]
type=friend
username=2002
Dialing 2002 from 2000
-- Executing Dial(IAX2/[EMAIL PROTECTED]/3, SIP/2002|20|tT) in new stack
2000 appears
Discussion
Subject: Re: [Asterisk-Users] Grandstream CallerID
Those suggestions were just for testing, obviously.
iax.conf
[2000]
callerid=My Name 2000
sip.conf
[2002]
type=friend
username=2002
Dialing 2002 from 2000
-- Executing Dial(IAX2/[EMAIL PROTECTED]/3, SIP/2002|20|tT) in new stack
2000
: [Asterisk-Users] Grandstream CallerID
Those suggestions were just for testing, obviously.
iax.conf
[2000]
callerid=My Name 2000
sip.conf
[2002]
type=friend
username=2002
Dialing 2002 from 2000
-- Executing Dial(IAX2/[EMAIL PROTECTED]/3, SIP/2002|20|tT) in new stack
2000 appears
]
[mailto:[EMAIL PROTECTED] On Behalf Of Philipp
Ebneter
Sent: Tuesday, December 21, 2004 6:04 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Grandstream CallerID
Those suggestions were just for testing, obviously.
iax.conf
[2000]
callerid=My Name 2000
David Ishmael wrote:
I reloaded using asterisk -rx reload.
-Dave
Finally, I could make it work with setup below. I recommend you try to
restart (not just reload) asterisk and your phone after you changed the
configuration.
extension.conf snippet:
[sip_phones]
exten =
Try this
exten = s,5,SetCIDNum(1234)
and see if the phone displays it
I have the same problem as David. No matter what I tried, I always see
the username of extension (the phone) himself.
In the following example, when I get a call from somebody, I just see
42 (=my number), but not who's
I have the same problem as David. No matter what I tried, I always see
the username of extension (the phone) himself.
In the following example, when I get a call from somebody, I just see
42 (=my number), but not who's calling me.
Setting the CallerID /CallerIdNum doen't work either:
--
On Sunday 19 December 2004 06:31, Wilson Pickett wrote:
Is it possible to send the incoming PSTN caller ID to a Grandstream
Budge Tone-100 SIP phone? I've configured the extensions.conf file
and the log is
As Eric notes, the BT100 phones won't show letters. If a call comes
in without
,
David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Matt Clauson
Sent: Sunday, December 19, 2004 11:44 AM
To: Wilson Pickett; Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Grandstream CallerID
On Sunday 19
Of David Ishmael
Sent: Sunday, December 19, 2004 2:03 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Grandstream CallerID
I did have fromuser set in my sip.conf so I went in and commented the line
out (thanks for the help on that). This is what I have
I forgot to ask, since the BT100 can't take characters (only numbers), I
would have assumed that there was a function to extract a number from an
incoming PSTN CID, is that possible?
Try this
exten = s,5,SetCIDNum(1234)
and see if the phone displays it
Is it possible to send the incoming PSTN caller ID to a
Grandstream Budge Tone-100 SIP phone? Ive configured the
extensions.conf file and the log is definitely showing the incoming caller ID
information, but its not being sent to the SIP phone (assuming thats possible).
Ive searched
David Ishmael wrote:
Is it possible to send the incoming PSTN caller ID to a Grandstream Budge
Tone-100 SIP phone? I've configured the extensions.conf file and the log is
definitely showing the incoming caller ID information, but its not being
sent to the SIP phone (assuming that's possible).
PROTECTED]
Sent: Monday, July 26, 2004 8:40 AM
Subject: [Asterisk-Users] GrandStream CallerID
I see my own number(or remote called num) instead of caller id on
incoming
calls on my BT-102.
but on Xlite everyything is OK. I'm using * latest CVS.
- shabanip
I see my own number(or remote called num) instead of caller id on incoming
calls on my BT-102.
but on Xlite everyything is OK. I'm using * latest CVS.
- shabanip
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
need sip.conf
do you have callerid=xxx specified for your phones? is the name the same as
the extension?
- Original Message -
From: shabanip [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 26, 2004 8:40 AM
Subject: [Asterisk-Users] GrandStream CallerID
I see my own
: shabanip [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, July 26, 2004 8:40 AM
Subject: [Asterisk-Users] GrandStream CallerID
I see my own number(or remote called num) instead of caller id on
incoming
calls on my BT-102.
but on Xlite everyything is OK. I'm using * latest CVS.
- shabanip
19 matches
Mail list logo