Afternoon all,
After doing some test on my asterisk box I can successfully receive
calls to my Asterisk PBX to a SIP phone from The Telstra PSTN network
Dial out from a sip phone is also not an issue, all calls connect and
terminate normally.
If I call the Asterisk PBX say from PSTN in Zap1-1
I have a similar issue.
I have 2 pstn lines and a phone plugged into my tdm400.
If I make a call to the outside using the phone, and the pstn number is
engaged, and I hang up, the line is not freed. I have been restarting
asterisk to get my external line back.
This does not happen if I make
not reappeared.
These server are also NTP servers and DHCP servers
Regards,
T
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Monday, 23 May 2005 12:49 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] Hangup Issues
I had a similar issue both with the X100P clones and TDM400.
Both were fixed by enabling AU zone and the busydetect functions. Don't
forget a full asterisk reload needs to take place after changing Zap conf
files, not just a soft-reload. Best way is to reboot the computer.
Mike
I have a
Discussion'
Subject: RE: [Asterisk-Users] Hangup Issues on TDM40B FXO Australia
Hi,
I have 2 Asterisk servers in .pg and 2 in .au
In .pg I have had to configure them as if they were in .au and use LS
signaling.
I am using the latest Asterisk @ Home (1.0) and it is working well with
1 TDM400P
Subject: [Asterisk-Users] Hangup Issues on TDM40B FXO Australia
Afternoon all,
After doing some test on my asterisk box I can successfully receive
calls to my Asterisk PBX to a SIP phone from The Telstra PSTN network
Dial out from a sip phone is also not an issue, all calls connect