Tzafrir Cohen schrieb:
> On Tue, Apr 29, 2008 at 02:36:36PM +0200, Tobias Wolf wrote:
>
>> Hi all,
>>
>> i have found the two possible solution for doing RAS with Asterisk:
>>
>> 1) PPPD (http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+PPPD)
>> I have downloaded the tgz proposed in the
Alexander Lopez schrieb:
> If you want to do RAS (modem or data) I would suggest going with a
> Portmaster PM3(Livingston, then purchased by Lucent, They are reliable
> and pretty cheap. You can use Asterisk to route the calls into it if you
> use a two port card.
>
>
> You can find them at www.por
Eric Wieling schrieb:
> Many people think ZapRAS is for modem dialin. None of the RAS stuff
> support modems, as far as I know. The RAS stuff in Asterisk is for
> networking via ISDN, rather than modem.
>
>
This is exactly what we want ZapRAS to use for ;)
Maybe anyone can enlighten me in a
ling List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] RAS with Asterisk and PRI
>
> Many people think ZapRAS is for modem dialin. None of the RAS stuff
> support modems, as far as I know. The RAS stuff in Asterisk is for
> networking via ISDN, rather than modem.
&g
Many people think ZapRAS is for modem dialin. None of the RAS stuff
support modems, as far as I know. The RAS stuff in Asterisk is for
networking via ISDN, rather than modem.
Tzafrir Cohen wrote:
> On Tue, Apr 29, 2008 at 02:36:36PM +0200, Tobias Wolf wrote:
>> Hi all,
>>
>> i have found the t
On Tue, Apr 29, 2008 at 02:36:36PM +0200, Tobias Wolf wrote:
> Hi all,
>
> i have found the two possible solution for doing RAS with Asterisk:
>
> 1) PPPD (http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+PPPD)
> I have downloaded the tgz proposed in the Wiki: app_pppd-060822.tgz
> But i
Hi all,
i have found the two possible solution for doing RAS with Asterisk:
1) PPPD (http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+PPPD)
I have downloaded the tgz proposed in the Wiki: app_pppd-060822.tgz
But it do not compiler under Asterisk 1.2.9.1-BRIstuffed-0.3.0-PRE-1q.
First th
Your gatekeeper should not be contacting port 1719, it should be
contacting port 1720.
On Tue, 2003-10-14 at 09:04, Mireia Munoz de jesus wrote:
> Hi!
>
> I have some problems when the gatekeeper tries to contact my asterisk at the
> 1719 port (port for RAS communication). The problem is that thi
Edit h323.conf:
[general]
port = 1719
bindaddr = 0.0.0.0
Regards,
Gus
- Original Message -
From: "Mireia Munoz de jesus" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 14, 2003 11:04 AM
Subject: [Asterisk-Users] RAS protocol
> Hi!
>
>
Hi!
I have some problems when the gatekeeper tries to contact my asterisk at the
1719 port (port for RAS communication). The problem is that this port is not
open on my machine. Is that a problem with asterisk configuration? If it is,
where can I configure that? I was looking at oh323.conf but the
hi everybody
is it posible to configure a RAS with a digium card in a linux box?
thanks
--
santiago josé ruano rincón
administración servidores y servicios de internet
red de datos
universidad del cauca
http://www.unicauca.edu.co/~santiago/llaves/santiago_pub.asc
hay 10 tipos de personas, las
11 matches
Mail list logo