Dear All ~
I have * setup running ok (with two Wildcard X100P's to PSTN). I also have
two analog phones connected into same through a SIPURA 2000. These work fine,
except that when I call out through PSTN try to send DTMF tones to (say) a
remote PBX to dial an extension, the gain seems to go
You can configure the gain to be lower on the SPA2000
via the web interface - Ido not remember the exact
location, but you will find it under advanced
settings.
--- CClarke [EMAIL PROTECTED] wrote:
Dear All ~
I have * setup running ok (with two Wildcard
X100P's to PSTN). I also have
two
CClarke wrote:
Dear All ~
I have * setup running ok (with two Wildcard X100P's to PSTN). I also have
two analog phones connected into same through a SIPURA 2000. These work fine,
except that when I call out through PSTN try to send DTMF tones to (say) a
remote PBX to dial an extension, the gain
Thanks for the suggestion!
I have tuned the SIPURA SPA 2000 gain as suggested and also re-adjusted X100P
gain and echo cancel. That helped a lot with audio quality. But still cannot
send DTMF tones out over PSTN. As well I discovered DTMF transmission from IAX
soft phone out to PSTN is not at all