> > cycles between:
> > RED- YEL/RED - YEL/REC - Red/REC - OK. Eventually settles into RED.
>
> Looks like you have a card problem a loop back to yhe T100P should go
> green in about 3 seconds like the channel bank.
>
Thanks, I tried the card out in another server and got the same kind
of respon
> > cycles between:
> > RED- YEL/RED - YEL/REC - Red/REC - OK. Eventually settles into RED.
>
> Looks like you have a card problem a loop back to yhe T100P should go
> green in about 3 seconds like the channel bank.
>
Thanks, I tried the card out in another server and got the same kind
of respon
> > cycles between:
> > RED- YEL/RED - YEL/REC - Red/REC - OK. Eventually settles into RED.
>
> Looks like you have a card problem a loop back to yhe T100P should go
> green in about 3 seconds like the channel bank.
>
Thanks, I tried the card out in another server and got the same kind
of respon
On Tue, 6 Jul 2004 11:58:58 -0500, Paul Concepcion <[EMAIL PROTECTED]> wrote:
> > Loopback should always make your status LEDs glow steady green. If that's not
> > working then you've got other problems.
> >
>
> It seems I may have those "other problems" you talked about. I made a
> loopback cabl
> Loopback should always make your status LEDs glow steady green. If that's not
> working then you've got other problems.
>
It seems I may have those "other problems" you talked about. I made a
loopback cable and tested it on the channel bank. After about three
seconds all the status lights went
On Monday 05 July 2004 13:58, Paul Concepcion wrote:
> In my * server I have a T100P, connected with a T1 crossover cable to an
> Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg' the
> alarm on the card starts blinking red. Running zttool confirmed that
> yes, it is a red alarm. I
-Users] T1 configuration, getting help via IRC?
In my * server I have a T100P, connected with a T1 crossover cable to an
Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg' the alarm
on the card starts blinking red. Running zttool confirmed that yes, it is a
red alarm. I
In my * server I have a T100P, connected with a T1 crossover cable to an
Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg' the
alarm on the card starts blinking red. Running zttool confirmed that
yes, it is a red alarm. I've read a few previous posts on this type of
setup and I