Hi all,
Im
trying to use my 2-port multi-tech VoIP gateway to
talk to asterisk. Ideally I want to put it in a remote location with a POTS
line one port1 and an analog phone on port2 to call that location. Both the MultiTech and Asterisk have non-natted
static IPs.
I have tried every
I tested Multitech with the same scenario and it works.
Stephen Foster wrote:
The MultiTech seems pretty simple to configure, just the IP of asterisk,
username and pass. The only field I havent tried its SIP URL. I was
recently at a MultiTech show and I saw them use x-lite to call to the
I am using an MVP-210 as FXS -- I haven't tried FXO.
Here's my sip.conf entry:
[mvp-x303]
type=friend
host=192.168.1.93
username=303
dtmfmode=rfc2833
context=fs1
disallow=all
allow=ulaw
(Not sure if dtmfmode is correct.)
Username must be an extension number that appears in the MVP210's inbound
