Hi,
I am about to integrate chan_misdn into asterisk version 1.4.22 with the
codec negotiation patch on an embedded platfrom. Has anyone ever integrated
chan_misdn with asterisk v1.4.22 + the codec negoiation patch, or any
version of asterisk + the codec negotiation patch? Is so, is there any
is
On Tue, Sep 23, 2008 at 1:48 PM, Thanos Koukoulis <[EMAIL PROTECTED]> wrote:
>
>
> On Tue, Sep 23, 2008 at 1:19 PM, Gergo Csibra <[EMAIL PROTECTED]> wrote:
>
>> Tuesday, September 23, 2008, 11:57:00 AM, Thanos wrote:
>>
>> > Hello
>>
>> > I have just set up Asterisk Asterisk 1.4.21.2 on a CentOS 5
On Tue, Sep 23, 2008 at 1:19 PM, Gergo Csibra <[EMAIL PROTECTED]> wrote:
> Tuesday, September 23, 2008, 11:57:00 AM, Thanos wrote:
>
> > Hello
>
> > I have just set up Asterisk Asterisk 1.4.21.2 on a CentOS 5.2 machine.
> > I am using the OpenVox B200P ISDN card.
>
> > My problem is that even thou
On Tue, Sep 23, 2008 at 1:19 PM, Julien Claassen <[EMAIL PROTECTED]> wrote:
> Hi!
> I'm also still new to this. but perhaps:
> Did you do make examples, or did you have an earlier asterisk
> installation,
> so the configuration files were present? If so did you make sure, that you
> mISDN card
Hi!
I'm also still new to this. but perhaps:
Did you do make examples, or did you have an earlier asterisk installation,
so the configuration files were present? If so did you make sure, that you
mISDN card was properly configured, using:
1. misdn-init scan
2. misdn-init config
3. misdn-ini
Tuesday, September 23, 2008, 11:57:00 AM, Thanos wrote:
> Hello
> I have just set up Asterisk Asterisk 1.4.21.2 on a CentOS 5.2 machine.
> I am using the OpenVox B200P ISDN card.
> My problem is that even though chan_misdn module seems to be loaded
> correctly with
> Asterisk (I can see it using
Hello
I have just set up Asterisk Asterisk 1.4.21.2 on a CentOS 5.2 machine.
I am using the OpenVox B200P ISDN card.
My problem is that even though chan_misdn module seems to be loaded
correctly with
Asterisk (I can see it using 'module show' command) the misdn commands are
not available
to me in
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Does anybody have any production systems running chan_misdn with
Asterisk 1.4?
I gave up on it about a year ago (under Asterisk 1.2) and switched to
zaphfc for improved stability and better echo cancellation. I was
wondering if things had improved la
--- Vieri <[EMAIL PROTECTED]> wrote:
> Unable to load module chan_misdn.so
Never mind. I found out it was a permissions problem.
Either asterisk must be run as root or the asterisk
user must be part of the dialout group.
(tweaked /usr/sbin/amportal)
__
Hi,
I have a Digium B410P 4-port BRI card.
I installed misdn 1.1.3 with hfcmulti driver and
misdnuser 1.1.3.
I configured the card "correctly" as misdnportinfo
reports:
# misdnportinfo
Port 1: TE-mode BRI S/T interface line (for phone
lines)
-> Interface is Poin-To-Point.
-> Protocol: DSS1
f the author and do not necessarily represent those
of the company.
-Original Message-
From: Tiziano Martelli [mailto:[EMAIL PROTECTED]
Sent: 29 March 2007 07:43 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] chan_misdn
This is my problem. I don't even know it t
This is my problem. I don't even know it this is the right site to ask
for it, but let's go.
I've a Asterisk box with 1.4.1 version version installed. It's equipped
with a TDM400 with 2 FXO modules and a HFC based ISDN BRI card.
Everything goes OK, except for the following scenario:
on the PMP S
Hi,
I recently upgraded to Asterisk 1.4.1 from Asterisk 1.4.0 and suddenly my
early B3 seems to have stopped working. When I call a number that is out of
service from my SIP phones, instead of hearing the announcement from the
telco, I immediately receive a SIP Busy message and the call is disco
Hello,
I am trying to use chan_misdn on a junghanns QuadBRI card.
Using the latest install-misdn-mqueue from beronet, all installation
went well apparently. However when I try to load the card it is not
recognized:
# modprobe hfcmulti type=0x04 protocol=0x12,0x12,0x2,0x2
layermask=0x
Hi list,
I ran into some trouble trying to get asterisk (1.4beta2) to compile with
misdn support. (I need to run a hfc card in NT mode)
when I run ./configure --with-misdn=/usr
it results into the following error:
checking for mISDN_open in -lmISDN... yes
checking /usr/include/mISDNuser/mISDNli
Hi,
I have the same problem, same error but loading modules changes nothing.
I'm using debian sarge and Asterisk 1.2: after compiling asterisk I
launched install-misdn from beronet site.
When I started Asterisk the same error arose:
Nov 30 15:43:06 ERROR[4914]: chan_misdn.c:3455 load_module: Una
2005/11/25, Jose Limeres <[EMAIL PROTECTED]>:
> Yoann,
> I am going through a similar problem you reported in a past posting:
>
> Nov 24 17:49:31 ERROR[9326] chan_misdn.c: Unable to initialize mISDN
> Nov 24 17:49:31 WARNING[9326] loader.c: chan_misdn.so: load_module
> failed, returning -1
> Nov 24
All right, thanks a lot for your answers ! :)
I also contacted beronet support (as they develop chan_misdn)... this
bug is known and should be fixed within a few weeks...
Alleluiiia ;))
I'm compiling with gcc32... hope it runs ! :-)
Cheers,
YLB.
2005/11/25, Kib Eki <[EMAIL PROTECTED]>
yes, i can confirm this. We had similar problems. FC4 comes with gcc4. We added
gcc3 and recompiled the kernel, asterisk and chan_misdn. Now we can load
chan_misdn.so with crashing the asterisk server.
Johann Steinwendtner wrote:
Make sure that you compile misdnuser with gcc3.x, gcc4 did
not
Make sure that you compile misdnuser with gcc3.x, gcc4 did
not work for me.
Hans
Yoann Le Bihan schrieb:
Jose,
I met so many problems these last 8 days that I don't remember exactly
which config was mine at that time, so I can't testify the answer...
(just for fun : my linux box is having 3 hd
Jose,
I met so many problems these last 8 days that I don't remember exactly
which config was mine at that time, so I can't testify the answer...
(just for fun : my linux box is having 3 hd with a different distro on
each of them and I plug the cable on the hd I want to boot depending
on my mood ;
Yoann,
I am going through a similar problem you reported in a past posting:
Nov 24 17:49:31 ERROR[9326] chan_misdn.c: Unable to initialize mISDN
Nov 24 17:49:31 WARNING[9326] loader.c: chan_misdn.so: load_module
failed, returning -1
Nov 24 17:49:31 WARNING[9326] chan_misdn.c: cb_log called with
ou
Hi,
Asterisk 1.2 on FC4, all is right, I'm happy. But when I try to load
chan_misdn after a successful install, I get it :
# asterisk -vvvgc
[...]
[chan_features.so] => (Feature Proxy Channel)
== Registered channel type 'Feature' (Feature Proxy Channel Driver)
[chan_misdn.so] => (Channel driv
check to see that /dev/mISDN exists.
>
> Dave.
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On
> Behalf Of me me
> Sent: Thursday, 26 May 2005 9:18 PM
> To: Asterisk Users Mailing List
> Subject: [Asterisk-Users] chan_misdn problem
>
me me
Sent: Thursday, 26 May 2005 9:18 PM
To: Asterisk Users Mailing List
Subject: [Asterisk-Users] chan_misdn problem
I've installed asterisk 1.0.7 with linux kernel 2.6.3 (patched for mISDN).
I Compile mISDNuser and loaded de modules (hfcmulti,
mISDNdsp) for my BN8S0 beronet card.
I
I've installed asterisk 1.0.7 with linux kernel 2.6.3
(patched for mISDN).
I Compile mISDNuser and loaded de modules (hfcmulti,
mISDNdsp) for my BN8S0 beronet card.
I have installed chan_misdn-beta-0.0.3rc4 with no
problems.
I have configured my misdn.conf as follows:
[general]
context=default
Has anyone got chan_misdn working with passive BRI cards yet? I've tried
both hfc (hfcpci.ko) and w6692 (w6692pci.ko) cards, but when I start
asterisk I get the following when chan_misdn is loaded:
[chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri))
== Parsing '/etc/asterisk/misdn.co
Title: Chan_misdn - cannot get the channel driver to load...
Hi.
The problem I'm having is trying to get the chan_misdn channel module to load when * is started for isdn functionality. I have downloaded the chan_misdn-beta-0.0.3-rc6 cvs and compiled it. Also I have copied the chan_mis
Yes i would like to have a solution with asterisk, hylafax
and misdn.
Em Wed, 16 Feb 2005 17:23:03 +0100
Andreas Czerniak <[EMAIL PROTECTED]> escreveu:
> Hi,
>
> do you need a sending or receiving fax solution ?
>
> Receiving fax via Asterisk and misdn - no problem, but i
> have no sending fax
Hi,
do you need a sending or receiving fax solution ?
Receiving fax via Asterisk and misdn - no problem, but i have no sending
fax solution at this time.
Andreas.
--On Freitag, 11. Februar 2005 15:04 + Anabela Abreu <[EMAIL PROTECTED]>
wrote:
Was anyone put hylafax working with chan_misdn?
Was anyone put hylafax working with chan_misdn?
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/ast
Hi!
> What are the advantages in using mISDN over other solutions?
- it replaces the (rather terrible) isdn4linux of the 2.4 kernels
- works with many many ISDN cards (no need for CAPI drivers or a HFC
chipset)
- most likely implements more ISDN features than bristuff
Haven't used mISDN myself
PROTECTED] On Behalf Of Thomas Häger
Sent: Friday, January 21, 2005 5:49 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] chan_misdn 0.0.3-rc5 - new release ! Please testit.
Hi there,
we've announced a new release of our chan_misdn channel driver.
chan_misdn is a GPL channel drive
Hi there,
we've announced a new release of our chan_misdn channel driver.
chan_misdn is a GPL channel driver for the new Linux ISDN-Layer mISDN
(www.isdn4linux.org).
So you can use all from mISDN supported ISDN catds in Asterisk.
Feel free to donwload and test it at :
http://www.beronet.com/d
Hi there,
we've announced a new release of our chan_misdn channel driver.
chan_misdn is a GPL channel driver for the new Linux ISDN-Layer mISDN
(www.isdn4linux.org).
So you can use all from mISDN supported ISDN catds in Asterisk.
Feel free to donwload and test it at :
http://www.beronet.com/downloa
Hi,
So if I want NT mode, I need layer 2 and 3 in user
space ?
Exactly.
How can I use the mISDNuser library to works with
asterisk ? I have compiled chan_misdn with mISDNuser.
That should be enough.
A nother question, to connect asterisk to a classic
pbx, what I need ? NT or TE mode ?? ptp mode ?
--- Simon Richter <[EMAIL PROTECTED]> a écrit :
> Hi,
>
> >>>You need to set the layermask when loading the
> card
> >>>driver. For a TE port, use 15 (layer 0-3) and for
> an
> >>>NT port, use 3 (layer 0-1).
>
> >>Thanks, I add layermask in my modprobe script :
>
> >>/sbin/modprobe --ignore-i
Hi,
You need to set the layermask when loading the card
driver. For a TE port, use 15 (layer 0-3) and for an
>>>NT port, use 3 (layer 0-1).
Thanks, I add layermask in my modprobe script :
/sbin/modprobe --ignore-install w6692pci protocol=2
layermask=3
That would be a TE port with the signaling lay
--- bagattin jerome <[EMAIL PROTECTED]> a écrit :
> --- Simon Richter <[EMAIL PROTECTED]> a écrit
> :
> > Hi,
> >
> > > TE Stack
> > > No Upper ID
> > > init_stack: File exists
> >
> > You need to set the layermask when loading the
> card
> > driver. For a TE
> > port, use 15 (layer 0-3) and
--- Simon Richter <[EMAIL PROTECTED]> a écrit :
> Hi,
>
> > TE Stack
> > No Upper ID
> > init_stack: File exists
>
> You need to set the layermask when loading the card
> driver. For a TE
> port, use 15 (layer 0-3) and for an NT port, use 3
> (layer 0-1).
>
> Simon
> _
Hi,
TE Stack
No Upper ID
init_stack: File exists
You need to set the layermask when loading the card driver. For a TE
port, use 15 (layer 0-3) and for an NT port, use 3 (layer 0-1).
Simon
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists
Hi
For use my isdn card in NT mode I have compiled
chan_misdn.
When I launch asterisk it stop with th e message :
[chan_misdn.so] => (Channel driver for mISDN Support
(Bri/Pri))
== Parsing '/etc/asterisk/misdn.conf': Found
UnLocking config_mutex
== Registered channel type 'mISDN' (This driver
I’m using avm fritz card usb with kernel 2.6
patch with mISDN. The module is load correctly when I type lsmod I’ve got
the following output:
Module Size Used by
zaptel 178308 0
avmfritz 21388 0
mISDN_isac 14336 1 avmfri
y one line if I recall.
>
> bkw
>
> > -Original Message-
> > From: [EMAIL PROTECTED] [mailto:asterisk-users-
> > [EMAIL PROTECTED] On Behalf Of Erwan DESVERGNES
> > Sent: Tuesday, October 19, 2004 10:57 AM
> > To: Asterisk Users Mailing List - Non-Commercial Discus
line if I recall.
bkw
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:asterisk-users-
> [EMAIL PROTECTED] On Behalf Of Erwan DESVERGNES
> Sent: Tuesday, October 19, 2004 10:57 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [Asteris
Did someone have succeed to compile
chan_misdn ???
I’ve got an error when in try to compile
chan_misdn.c:68: error:
`__use_AST_MUTEX_DEFINE_STATIC_rather_than_AST_MUTEX_INITIALIZER__' undeclared
here (not in a function)
thanks
_
Hi Asterisk knights,
we are proud to announce that our brand new chan_mISDN channel driver for
Asterisk is now official released for testing.
You can download it under http://www.beronet.com/index.php?PageID=3017.
Please test it ample, and post bugs or feature requests to
www.beronet.com/bugs.
H
How is it possible to get a dialtone using chan_misdn for a ISDN
phone connected to a hfc nt-mode card?
misdn.conf:
[intern]
ports=2
context=isdnIntern
immediate=yes
extensions.conf
[isdnIntern]
exten => s,1,DigitTimeout(5)
I don't want to use answer here because the phone does not show the
48 matches
Mail list logo
