: Re: [asterisk-users] Help with MFC/R2
I'm not sure but on E1 setup you can have only one way (in or out). In
my case i have 15 in and 15 out.
Told me more about your hardware:
- E1 cards
- How did you do to connect E1 interface to E1 asterisk's card ?
- You can receive calls ?
Please
directions...
I must differentiate this??
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Luis Morales
Sent: Friday, September 19, 2008 8:06 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
when I
try to call in.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Luis Morales
Sent: Thursday, September 18, 2008 12:45 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
I'm not sure
Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
Hi dae,
Your zapata.conf must be ok,
now inyour unicall.conf
[channels]
language=es
context=from-pstn
usecallerid=yes
hidecallerid=no
immediate=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
Subject: Re: [asterisk-users] Help with MFC/R2
Hi Dae,
In zaptel.conf change ccs for cas and comment dchan line, for example:
span=1,1,0,cas,hdb3
cas=1-15:1101
#dchan=16
cas=17-31:1101
--
Humberto Figuera - Using Linux 2.6.22
Usuario GNU/Linux 369709
Caracas - Venezuela
GPG Key Fingerprint
Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
The line is supposed be E1-MFC/R2 and works perfect with a Panasonic PBX,
actually
Exists any variant of MFC/R2? And how can I configure it to get working?
As I said, no matter which variant you try
...
I must differentiate this??
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Luis Morales
Sent: Friday, September 19, 2008 8:06 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
Hi dae
: [asterisk-users] Help with MFC/R2
Not really the unicall setup must be idem. So you can see the unicall
channels ?
It's moises are busy i can give you support too
Regards,
Luis Morales
On Sat, Sep 20, 2008 at 12:15 PM, Dae Yeung Um [EMAIL PROTECTED] wrote:
Hi Luis,
But this E1 has 30 channels
with UC show channels, and it's says Idle
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Luis Morales
Sent: Friday, September 19, 2008 12:23 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Moises Silva
Sent: Wednesday, September 17, 2008 10:57 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
It seems to me your lines are blocked.
Execute zttool and if you see 1101
...
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Moises Silva
Sent: Wednesday, September 17, 2008 10:57 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
It seems to me your lines are blocked
Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
Dae,
Activate debug full:
asterisk -vr
in other console do:
tail -vf /var/log/asterisk/full
Try to put call and send us more details about your logs
Regards,
Luis Morales
On Thu
, September 18, 2008 8:17 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
Dae,
Activate debug full:
asterisk -vr
in other console do:
tail -vf /var/log/asterisk/full
Try to put call and send us more details
!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Luis Morales
Sent: Thursday, September 18, 2008 10:10 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
Ok,
in your E1 setup:
1-15: to outgoing
Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
Ok,
in your E1 setup:
1-15: to outgoing calls
16-30: for incomming calls
?
Now for make calls your telephone company must be provide MFC-R2
signaling. In your case the logs files show an invalid signal on make
call.
Regards,
Luis
The line is supposed be E1-MFC/R2 and works perfect with a Panasonic PBX,
actually
Exists any variant of MFC/R2? And how can I configure it to get working?
As I said, no matter which variant you try, the AB bits MUST be in 10
to be able to make calls with Unicall/libmfcr2. I have never seen
:[EMAIL PROTECTED] On Behalf Of Luis Morales
Sent: Thursday, September 18, 2008 12:45 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
I'm not sure but on E1 setup you can have only one way (in or out). In
my case i have 15 in and 15 out
Hi Dae,
In zaptel.conf change ccs for cas and comment dchan line, for example:
span=1,1,0,cas,hdb3
cas=1-15:1101
#dchan=16
cas=17-31:1101
--
Humberto Figuera - Using Linux 2.6.22
Usuario GNU/Linux 369709
Caracas - Venezuela
GPG Key Fingerprint = 5AAC DF0C 00F4 2834 28BA 37AD 3364 01D1 74CA
Hello
I'm new in this list, but I have some experience working with asterisk and
we are located in Bogota, Colombia.
At now I'm having some problems configuring an E1 MFC/R2.
I have configured Unicall as indicated using the following versions, and
everything seems to be correct,
That means someone else has already open the zap device, most likely
Asterisk. Just one application at a given time can open a zap device.
You cannot run testcall and Asterisk at the same time unless you make
sure they don't try to open the same channels.
Moy
On Wed, Sep 17, 2008 at 1:27 AM, Dae
Check on this link,
http://www.moythreads.com/wordpress/
I have working asterisk+mfc/r2 with 4 E1 on Venezuela and work fine!
Regards,
Luis Morales
On Thu, Sep 18, 2008 at 1:57 AM, Dae Yeung Um [EMAIL PROTECTED] wrote:
Hello
I'm new in this list, but I have some experience working with
!
Thank you!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Moises Silva
Sent: Wednesday, September 17, 2008 8:33 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
That means someone else has
Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
That means someone else has already open the zap device, most likely
Asterisk. Just one application at a given time can open a zap device.
You cannot run testcall and Asterisk at the same time unless
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Moises Silva
Sent: Wednesday, September 17, 2008 10:57 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Help with MFC/R2
It seems to me your lines are blocked.
Execute zttool
Melcon Moraes napisał(a):
supertones=pl inside your unicall.conf
Ok, done.
something missing, isn't? What are you trying to do?
Maybe that will be better (thz Marcin):
# cat call
Channel: Unicall/1/363
Application: playback
Data: demo-thanks
klaudia*CLI !cp call
- Non-Commercial Discussion
asterisk-users@lists.digium.com
Cc:
Sent: Mon, 27 Mar 2006 01:01:12 +0200
Delivered: Sun, 26 Mar 2006 16:59:27
Subject:[Asterisk-Users] help on mfc/r2
Melcon Moraes napisaÅ(a):
supertones=pl inside your unicall.conf
Ok, done.
something missing, isn't? What
Melcon Moraes napisał(a):
but can you make a simple call
to your regular phone number from some SIP/IAX2 softphone/hardphone?
Right now? It's not working.
I could use (i have needed hardware).
Data: SIP/extension-number
Or even capi/zap channel.
When e400p is configured as a E1/PRI and
-
From: Krzysztof Drewicz [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Cc:
Sent: Mon, 27 Mar 2006 02:49:47 +0200
Delivered: Sun, 26 Mar 2006 18:47:47
Subject:[Asterisk-Users] help on mfc/r2
Melcon Moraes napisaÅ
Melcon Moraes napisał(a):
Well well,
Question: if you have PRI, why are you using R2?
Sugestion: check Alcatel's setup for this card. On Alcatel side, do you
have any alarms or errors?
I would like to build simple IVR soulution, whitch allows me to do
free B-channels. Now I could
: Mon, 27 Mar 2006 04:10:23
Subject:[Asterisk-Users] help on mfc/r2
Melcon Moraes napisa³(a):
Well well,
Question: if you have PRI, why are you using R2?
Sugestion: check Alcatel's setup for this card. On Alcatel side, do you
have any alarms or errors?
I would like to build simple IVR
Hello there!
I've problem with setting up unicall / mfcR2.
can't find proper notation for channel, trying unicall/1,
unicall/1/1001, unicall/g1, unicall/g1/1000
and still having no luck.
klaudia*CLI !cp call /var/spool/asterisk/outgoing
-- Attempting call on Unicall/1001 for application
?
[]'s
MM
-Original Message-
From: Krzysztof Drewicz [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com
Cc:
Sent: Sat, 25 Mar 2006 10:36:31 +0100
Delivered: Sat, 25 Mar 2006 03:34:29
Subject:[Asterisk-Users] help on mfc/r2
Hello there!
I've problem with setting up
Melcon Moraes napisał(a):
IF all the things are right, at *CLI UC show channels will show you
all the channels you have.
If in your unicall.conf you wrote group = 1 along with channels =
declaration, that range will belong to group 1 and you can use them
like Unicall/g1.
How many spans are
Delivered: Sat, 25 Mar 2006 15:24:57
Subject:[Asterisk-Users] help on mfc/r2
Melcon Moraes napisa³(a):
IF all the things are right, at *CLI UC show channels will show you
all the channels you have.
If in your unicall.conf you wrote group = 1 along with channels =
declaration, that range
Melcon Moraes napisał(a):
Why are you using the bit mask 31?
No, but i've tried every combination there. No diffrence there.
So far, thats all about zaptel setup. Just to make sure, did you really
have chan_unicall loaded? What's the output of UC show channels.
*CLI uc show channels
Delivered: Sat, 25 Mar 2006 16:25:17
Subject:[Asterisk-Users] help on mfc/r2
Maybe it does mater, while starting asterisk -vvvc:
[chan_unicall.so] = (Unified call processing (UniCall))
== Parsing '/etc/asterisk/unicall.conf': Found
Loading protocol mfcr2
Mar 25 22:17:23 WARNING[13951
36 matches
Mail list logo