I emailed then last 2 hours ago. Just waiting for their reply.ThanksOn 8/31/06, Moises Silva <[EMAIL PROTECTED]
> wrote:Sangoma has excellent support, why dont you ask them?On 8/31/06, Angelito Manansala <
[EMAIL PROTECTED]> wrote:> Hello Guys,>> We have a problem in configuring Sangoma A104. We wa
I had similar error messages when I configured an A101, using the latest
stable drivers, and found that restarting LINUX seemed to solve the problem
Seems wanrouter stop doesn't clean up after itself.
do a shutdown -r now and see if it comes up properly
John Novack
Angelito Manansala wrote:
I
Hi,
I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI
Express ) Card installed on the box. *Its not detected.* Details are as
below :-
[root@asterisk ~]# lspci
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS48
Hi, folks!
Sangoma has an informal user survey up on their home page (at
http://www.sangoma.com) asking if people would use their A500 card for
North American BRI, if it were supported.
I encourage anyone with an interest in voice BRI in North America to
vote; this information will be used for de
aptel.conf:
span=1,1,0,esf,b8zs
span=2,0,0,esf,b8zs
-Original Message-
From: Michael L. Young [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 03, 2007 9:37 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [asterisk-users] Sangoma A102 w/ EC modu
I've been using Asterisk 1.2.6 with a 4 port FXO Sangoma A200 card for
the past month without many problems (other than the fact that the
Sangoma card doesn't disconnect hung up calls immediately, which I
posted about in another thread, and has still not been fixed),
however, I had a call from one
Apr 2011 19:38:06 +0530
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] Sangoma A101DE 1 Port E1/T1 With Hardware Echo
Cancellation ( PCI Express ) Card
Hi,
I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI
Express ) Card installed on the box. Its not
On Wed, Apr 13, 2011 at 8:07 PM, satish patel wrote:
> Try dmesg command
>
> root@:~# dmesg | grep -i Sangoma
> [ 2303.473601] WANPIPE(tm) Hardware Support Module 3.5.19.0 (c) 1994-2010
> Sangoma Technologies Inc
> [ 2303.481115] WANPIPE(tm) Interface Support Module 3.5.19.0 (c) 1994-2010
>
303.506498] WANPIPE(tm) Socket API Module 3.5.19.0 (c) 1994-2010 Sangoma
> Technologies Inc
> [ 2303.525334] WANPIPE(tm) WANEC Layer 3.5.19.0 (c) 1995-2006 Sangoma
> Technologies Inc.
>
>
> From: kaushalshri...@gmail.com
> Date: Wed, 13 Apr 2011 19:38:06 +0530
> To: aste
On Wed, Apr 13, 2011 at 8:07 PM, satish patel < satish...@hotmail.com > wrote:
Try dmesg command
root@:~# dmesg | grep -i Sangoma
[ 2303.473601] WANPIPE(tm) Hardware Support Module 3.5.19.0 (c) 1994-2010
Sangoma Technologies Inc
[ 2303.481115] WANPIPE(tm) Interface Support Module 3
On Wed, Apr 13, 2011 at 9:23 PM, Tim Nelson wrote:
>
> On Wed, Apr 13, 2011 at 8:07 PM, satish patel wrote:
>
>> Try dmesg command
>>
>> root@:~# dmesg | grep -i Sangoma
>> [ 2303.473601] WANPIPE(tm) Hardware Support Module 3.5.19.0 (c) 1994-2010
>> Sangoma Technologies Inc
>> [ 2303.481115
I'd say boot with ubuntu livecd and run lspci command.
Make sure your card back side LED working.
--
Sent from my iPhone
On Apr 13, 2011, at 2:32 PM, Kaushal Shriyan
wrote:
On Wed, Apr 13, 2011 at 9:23 PM, Tim Nelson
wrote:
On Wed, Apr 13, 2011 at 8:07 PM, satish patel
wrote:
T
Hi Guys,
Anyone might know why this error keeps showing up and inbound/outbound is
not working on a Bell PRI with Sangoma A101D?
-- Got SABME from network peer.
Sending Unnumbered Acknowledgement
No calls can be made inbound/outbound.
Keeps repeating. No alarms ON and no changes been made to th
Mike Garey wrote:
It turns out that the Sangoma card had suddently decided to stop
answering on channels 2,3 and 4, so if someone was using channel 1,
then no other calls would be picked up. We could, however, make
outgoing calls. I tried restarting Asterisk and it didn't make a
difference. I
On 5/26/06, Dr. Michael J. Chudobiak <[EMAIL PROTECTED]> wrote:
Mike Garey wrote:
> It turns out that the Sangoma card had suddently decided to stop
> answering on channels 2,3 and 4, so if someone was using channel 1,
> then no other calls would be picked up. We could, however, make
> outgoing
Mike Garey wrote:
And as far as I know, this isn't a problem that plagues all FXO cards,
as there are many other users who don't have the same problem.
Are you sure your LEC is sending you "disconnect supervision" on the
line? That's the only way *anybody's* cards are going to know if the
On Friday 26 May 2006 17:07, Mike Garey wrote:
> And as far as I know, this isn't a problem that plagues all FXO cards,
> as there are many other users who don't have the same problem. I just
> got off the phone with a Sangoma tech representative and they said
> that they tried testing hangup dete
On Friday 26 May 2006 18:36, Brian Capouch wrote:
> I have a fantasy that someday in the near future, after VoIP has
> provided true local loop competition even out here in Hooterville, I'll
> run into the local telco folks, now down on their luck. In my vision
> they'll be sitting on the street c
- "bruce bruce" wrote:
> Hi Guys,
>
Anyone might know why this error keeps showing up and inbound/outbound is not
working on a Bell PRI with Sangoma A101D?
>
-- Got SABME from network peer.
Sending Unnumbered Acknowledgement
>
No calls can be made inbound/outbound.
>
Keeps repe
As far as I can tell, after discussing this matter with other asterisk
users in my area, my telco _does_ provide disconnect supervision.. It
seems that the problem is actually related to the Sangoma A200 card
I'm using, as two other people both using this same card have
expressed the same problem.
Mike Garey wrote:
As far as I can tell, after discussing this matter with other asterisk
users in my area, my telco _does_ provide disconnect supervision.. It
seems that the problem is actually related to the Sangoma A200 card
I'm using, as two other people both using this same card have
express
Likewise here.
Using a 10 port FXO card and no problems detecting remote hangup. I'll
grant you it can be a little slow sometimes however.
On Mon, 2006-04-24 at 16:54 -0500, Rich Adamson wrote:
> Mike Garey wrote:
> > As far as I can tell, after discussing this matter with other asterisk
> > use
well, the problem isn't that the card doesn't detect a disconnect,
it's that it doesn't detect it immediately (or at least within a short
period). I'm talking about 10 or so seconds before the channel is
hung up - which is causing empty voicemail messages to be left when
the user hangs up before t
Mike Garey wrote:
well, the problem isn't that the card doesn't detect a disconnect,
it's that it doesn't detect it immediately (or at least within a short period).
Odds are that is the telco, and not the Sangoma or Digium card. That is
quite normal for a 10-30 second delay. Not all telco C
On Mon, 2006-04-24 at 17:20 -0400, Mike Garey wrote:
> As far as I can tell, after discussing this matter with other asterisk
> users in my area, my telco _does_ provide disconnect supervision.. It
> seems that the problem is actually related to the Sangoma A200 card
> I'm using, as two other peop
yes, I'm using kewlstart
On 4/24/06, Sean Cook <[EMAIL PROTECTED]> wrote:
> On Mon, 2006-04-24 at 17:20 -0400, Mike Garey wrote:
> > As far as I can tell, after discussing this matter with other asterisk
> > users in my area, my telco _does_ provide disconnect supervision.. It
> > seems that the
Mike,
As someone else mentioned, the delay in getting the disconnect from the
CO is a function of the CO equipment and there isn't much you can do
about that. In one of my test cases from yesterday, disconnect came
within three seconds of the pstn phone hanging up.
I'd have to guess that some
John Novack wrote:
Mike Garey wrote:
well, the problem isn't that the card doesn't detect a disconnect,
it's that it doesn't detect it immediately (or at least within a short
period).
Odds are that is the telco, and not the Sangoma or Digium card. That is
quite normal for a 10-30 second del
Are you in the USA or Canada?
Mike Garey wrote:
yes, I'm using kewlstart
On 4/24/06, Sean Cook <[EMAIL PROTECTED]> wrote:
On Mon, 2006-04-24 at 17:20 -0400, Mike Garey wrote:
As far as I can tell, after discussing this matter with other asterisk
users in my area, my telco _does_ provide disco
On 4/26/06, Eric ManxPower Wieling <[EMAIL PROTECTED]> wrote:
> Are you in the USA or Canada?
I'm in Canada. Toronto, Ontario to be exact. And it was on a local
ontario Asterisk users group where other people with Sangoma A200
cards mentioned they were having the same problem.. So it could be
som
Mike Garey wrote:
; How many seconds of silence before we end the recording
maxsilence=10
; Silence threshold (what we consider silence, the lower, the more sensitive)
silencethreshold=128
the maxsilence setting doesn't really help, as I believe that only
limits how long we record f
On 4/26/06, John Novack <[EMAIL PROTECTED]> wrote:
>
>
> Mike Garey wrote:
>
> >
> >
> >>
> >>; How many seconds of silence before we end the recording
> >>maxsilence=10
> >>; Silence threshold (what we consider silence, the lower, the more
> >>sensitive)
> >>silencethreshold=128
> >>
> >>
> >
>
601 - 632 of 632 matches
Mail list logo
